IC-E7_user.pdf

《IC-E7_user.pdf》由会员分享，可在线阅读，更多相关《IC-E7_user.pdf（96页珍藏版）》请在收音机爱好者资料库上搜索。

1、INSTRUCTION MANUAL iE7 VHF/UHF DUAL BAND FM TRANSCEIVER This device complies with Part 15 of the FCC rules. Operation is sub- ject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference th

2、at may cause undesired operation. WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CEL- LULAR RADIO TELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW. i FOREWORD Thank you for purchasing this Icom product. The IC-E7 VHF/UHF DUAL BAND FM TRANSCEIVER is designed and built with Ico

3、ms superior technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. We want to take a couple of moments of your time to thank you for making your IC-E7 your radio of choice, and hope you agree with Icoms philosophy of “technology fi rst.”

4、 Many hours of re- search and development went into the design of your IC-E7. D FEATURES Covers the 0.495999.990 MHz* frequency range *Some frequency bands are disabled according to version CTCSS and DTCS encoder/decoder standard 1250 memory channels* with 18 banks available *200 auto write and 50 s

5、can edge channels are included. 1800 mAh large capacity Li-Ion battery standard IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL This in- struction manual contains important operating instructions for the IC-E7. EXPLICIT DEFINITIONS

6、WORDDEFINITION RDANGER! Personal death, serious injury or an explo- sion may occur. RWARNING! Personal injury, fire hazard or electric shock may occur. CAUTION Equipment damage may occur. NOTE If disregarded, inconvenience only. No risk of personal injury, fi re or electric shock. DISPOSAL The cross

7、ed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and elec- tronic products, batteries, and accumulators (re- chargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispo

8、se of these products as unsorted municipal waste. Dispose of them according to the laws in your area. Icom, Icom Inc. and Icom logo are registered trademarks of Icom Incorpo- rated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or

9、 other countries. ii PRECAUTIONS RDANGER! NEVER short the terminals of the trans- ceiver or battery pack. RDANGER! Use and charge only specifi ed Icom battery packs with Icom radios or Icom chargers. Only Icom battery packs are tested and approved for use with Icom radios or charged with Icom charge

10、rs. Using third-party or counterfeit battery packs or chargers may cause smoke, fi re, or cause the battery to burst. RWARNING RF EXPOSURE! This device emits Radio Frequency (RF) energy. Caution should be observed when operating this device. If you have any questions regarding RF exposure and safety

11、 standards please refer to the Federal Com- munications Commission Offi ce of Engineering and Technologys report on Evaluating Compliance with FCC Guidelines for Human Radio Frequency Electromagnetic Fields (OET Bulletin 65) RWARNING! NEVER hold the transceiver so that the antenna is very close to,

12、or touching exposed parts of the body, especially the face or eyes, while transmitting. The transceiver will perform best if the microphone is 5 to 10 cm (2 to 4 inches) away from the lips and the transceiver is vertical. RWARNING! NEVER operate the transceiver with a headset or other audio accessor

13、ies at high volume levels. The continuous high volume operation may cause a ringing in your ears. If you experience the ringing, reduce the volume level or discontinue use. RWARNING! NEVER operate the transceiver while driving a vehicle. Safe driving requires your full attention anything less may re

14、sult in an accident. RWARNING! NEVER operate or touch the transceiver with wet hands. This may result in an electric shock or may damage the transceiver. DO NOT expose the transceiver to rain, snow or any liquids. The transceiver may be damaged. DO NOT operate or touch the transceiver with wet hands

15、. This may result in an electric shock or damage the transceiver. DO NOT push the PTT when not actually desiring to trans- mit. DO NOT operate or place the transceiver in direct sunlight or in areas with temperatures below 10C (+14F) or above +60C (+140F). DO NOT use harsh solvents such as benzine o

16、r alcohol when cleaning, as they will damage the radio surfaces. Place the unit in a secure place to avoid inadvertent use by children. iii SUPPLIED ACCESSORIES qwer t q Battery pack (BP-243) .1 w Battery charger (BC-164) .1 e Antenna .1 r Handstrap .1 t AC adapter* (BC-145LE/LUK) .1 ( The shape of

17、the BC-145LE and BC-145LUK are different.) *Depending on versions. Not supplied with some versions. TABLE OF CONTENTS FOREWORD . i IMPORTANT . i EXPLICIT DEFINITIONS . i DISPOSAL . i PRECAUTIONS . ii SUPPLIED ACCESSORIES . iii TABLE OF CONTENTS . iii QUICK REFERENCE GUIDE . IVIII Preparation . I You

18、r fi rst contact . III Repeater operation . V Memory programming . VI Programmed scan operation . VII 1 PANEL DESCRIPTION . 14 Front, top and side panels . 1 Function display . 3 2 BATTERY CHARGING . 58 Caution . 5 Battery installation . 7 Battery charging . 8 3 FREQUENCY AND CHANNEL SETTING . 912 V

19、FO and memory channels . 9 Operating band selection . 9 Setting a frequency . 11 Setting a tuning step . 11 Selecting a memory channel . 12 Selecting a call channel . 12 4 BASIC OPERATION . 1318 Receiving . 13 Setting audio volume . 13 Squelch level setting . 14 Operating mode selection . 14 Monitor

20、 function . 15 Attenuator function . 15 iv 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Transmitting. 16 Transmit power selection . 16 Dial select step. 17 Lock function. 18 DIAL function assignment . 18 5 REPEATER OPERATION. 1923 General. 19 Offset frequency. 20 Subaudible tones. 21 1750 Hz tone. 23 6 MEMOR

21、Y/CALL CHANNELS . 2433 General description. 24 Memory channel programming. 24 Memory bank setting. 25 Memory bank selection . 26 Programming memory/bank name. 27 Selecting display type. 28 Copying memory contents. 29 Memory clearing. 30 Transferring memory contents . 31 Erasing/transferring bank con

22、tents. 32 Call channel programming . 33 Copying call channel contents. 33 7 SCAN OPERATION . 3441 Scan types. 34 Full/band/programmed scan. 35 Scan edges programming. 36 Memory/bank scan. 37 Auto memory write scan. 38 Skip channel/frequency setting . 39 Scan resume condition. 41 8 PRIORITY WATCH . 4

23、244 Priority watch types. 42 Priority watch operation. 43 9 TONE SQUELCH AND POCKET BEEP . 4548 Tone/DTCS squelch operation . 45 Tone squelch frequency/DTCS code setting. 46 DTCS polarity setting . 47 Tone scan. 48 10 SET MODE . 4959 General. 49 Set mode items . 50 11 OTHER FUNCTIONS . 6064 Data clo

24、ning . 60 Auto power-off function . 61 TV channel operation. 62 All reset . 63 Partial reset. 64 12 FREQUENCY TABLE . 6572 TV channels . 65 VHF marine channels. 68 Weather channels . 68 Other communications in the USA. 69 Other communicationsother countries. 71 13 MAINTENANCE . 7374 Troubleshooting.

25、 73 Optional CP-21LR fuse replacement. 74 14 SPECIFICATIONS . 7576 Transceiver. 75 Battery pack (BP-243). 76 Battery charger (BC-164). 76 15 OPTIONS . 7779 Options. 77 16 POCKET GUIDE . 8081 17 CE . 82 16 17 I QUICK REFERENCE GUIDE Preparation D Battery installation qRemove the battery cover from the transceiver. wInstall the BP-243 (Li-Ion battery pack). Be sure to observe the correct polarity. eReplace the battery cover to the transceiver. Keep the battery contacts clean. Its a good idea to clean the battery terminals once a week. DD Antenna Insert the supplied antenna in