Icom_HM-133S_user.pdf

《Icom_HM-133S_user.pdf》由会员分享，可在线阅读，更多相关《Icom_HM-133S_user.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、ABOUT HM-133S (for IC-2100 series) w e r q !1 y u o i Mic element !0 t Push the key to accessible the first function of keys. Push the key after FUNCTION SWITCH (!0) to accessible the second function of keys. Push the key after DTMF-S (o) to accessible the third function of keys. Second Function Thi

2、rd Function First Function q KEYPAD Push to accessible the first function of keys. Used for controlling the transceiver, transmitting a DTMF signals, etc. See back page for function details. w ACTIVITY INDICATOR Lights red while any key is pushed (except FUNC or DTMF-S. Lights red while transmitting

3、. Lights green while the one-touch PTT function is in use. e UP/DOWN SWITCHES Push either switch to change the operating frequency, memory channel, set mode contents, etc. (pgs. 15, 26) Push either switch for 1 sec. to start scanning. (p. 37) r PTT SWITCH Push for 1 sec. to transmit; release to rece

4、ive. Toggles between transmitting and receiving while the one-touch PTT function is in use. (p. 20) t VFO/LOCK SWITCH Push to select VFO mode. Push for 1 sec. to toggle the lock function ON and OFF. (p. 14) y MEMORY/CALL SWITCH Push to select memory mode. (p. 26) Push for 1 sec. to select call chann

5、el. (p. 32) The supplied microphone HM-133S is redesigned from the HM-98S. The functions of HM-133S are instructed in this sheet. Please refer to following information. u NULL SWITCH B No function. i FUNCTION SWITCHES (p. 57) Assign your desired key function from the front panel switches. Default se

6、ttings are LOW for F-1 (DUP when pushed and held) and TONE for F-2 (T-SCAN when pushed and held). o DTMF MEMORY SELECT SWITCH DTMF-S (pgs. 22, 44, 45) Push to accessible the third function of keys. Turns the DTMF encoder ON and OFF. When DTMF encoder is activated, function indicator lights green. Se

7、e back page for function details. !0 FUNCTION SWITCH FUNC Push to accessible the second function of keys. Push again to cancel it. When accessible the secondary function, function indicator lights orange. See back page for function details. !1 FUNCTION INDICATOR Lights orange while FUNC is activated

8、indicates the second function of switches can be accessed. Lights green when DTMF-S is activatedDTMF sig- nals can be transmitted with the keypad. * The number in ( ) indicates the instructions page number. KEYFUNCTIONSECONDARY FUNCTION (+key)OTHER FUNCTIONS Toggles between opening and closing the s

9、quelch. Starts and stops scanning.(p. 37) Starts and stops priority watch.(p. 42) Selects high output power.(p. 19) Selects mid output power.(p. 19) Selects low output power.(p. 19) Selects duplex.(p. 21) Selects +duplex.(p. 21) Selects simplex.(p. 21) No primary function. Clears a digit before entr

10、y.(p. 17) Cancels the scan, priority watch or DTMF memory function.(pgs. 16, 37, 43) Enters set mode and advances the set mode selection. Sets the keypad for numeral input.(p. 17) Decreases the set mode selection order after entering set mode. No primary function. No primary function. No primary fun

11、ction. No secondary function. No secondary function. Turns the one-touch PTT function ON and OFF.(p. 20) No secondary function. No secondary function. Turns the DTMF memory encoder function ON.(p. 44) Turns the subaudible tone encoder ON. (p. 21) Turns the pocket beep function ON. (p. 46) Turns the

12、tone squelch function ON. (p. 46) While being pushed, transmits a 1750 Hz tone.(p. 22) Writes the VFO contents into the memory channel or call channel.(pg. 29) Advances the memory channel number when continuously pushed after program- ming is completed.(p. 28) DTMF memory OFF. Turns the subaudible t

13、one encoder, pocket beep or tone squelch OFF. (pgs. 21, 46, 47) Mutes the audio.(p. 18) Mute function is released when any operation is performed. Locks the digit keys on the keypad (including the AD, # and M keys).(p. 14) Sends a 1750 Hz tone signal for 0.5 sec. (p. 22) After is pushed: Transmit th

14、e appropriate DTMF code. (pgs. 22, 45) Push 0 to 9, A to D to transmit the DTMF memory contents when the DTMF memory encoder is activated. (p. 44) After is pushed: Transmit the appropriate DTMF code.(p. 45) I Microphone keypadq * The number in ( ) indicates the instructions page number. A to D to transmit the DTMF memory(p. 44) A-6146D-1EX