IC-PCR1500_IC-PCR2500_user.pdf

《IC-PCR1500_IC-PCR2500_user.pdf》由会员分享，可在线阅读，更多相关《IC-PCR1500_IC-PCR2500_user.pdf（148页珍藏版）》请在收音机爱好者资料库上搜索。

1、INSTRUCTION MANUAL iPCR2500 COMMUNICATIONS RECEIVERS iPCR1500 i FOREWORD Thank you for purchasing this Icom receiver. The IC-PCR1500/ PCR2500 COMMUNICATIONS RECEIVERSis designed and built with Icoms state of the art technology and craftsmanship. With proper care, this receiver should provide you wit

2、h years of trou- ble-free operation. DDFEATURES Common to both models Wide frequency coverage with all mode receive Real-time bandscope function IF shift function ANF and NR functions are available (Only when the DSP unit is installed.) For IC-PCR2500 only Dualwatch operation/Diversity operation DV

3、and P25 Digital modes are available (Only when the specifi c digital unit is installed.) IMPORTANT READ ALL INSTRUCTIONScarefully and completely before using the receiver. SAVE THIS INSTRUCTION MANUALThis in- struction manual contains important operating instructions for the IC-PCR1500/PCR2500. EXPL

4、ICIT DEFINITIONS MOUSE PROPERTY SETTING Depending on the Mouse Property setting in the control panel, main and sub mouse button functions are swapped. In this instruction manual, the operation is described with the default setting. Icom, Icom Inc. and the logo are registered trademarks of Icom Incor

5、- porated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. WORDDEFINITION R WARNING! CAUTION NOTE Personal injury, fi re hazard or electric shock may occur. Equipment damage may occur. Recommended for optimum use. No risk of personal injury, fi

6、 re or electric shock. ii SYSTEM REQUIREMENTS PC MicrosoftWindowsXP/2000/Me/98SE installed USB 2.0 or 1.1 Intel PentiumIII 450 MHz or faster (Pentium4 recom- mended) At least 128 MB of memory or higher (256 MB or more rec- ommended) At least 50 MB or higher hard disk space At least 1024 768 pixel re

7、solution, high color display CD-ROM or DVD drive is required for software installa- tion. Mouse or other compatible pointing device is required. USB audio dropouts or gaps may occur, because of a lack of PC power. Additional hard disk space is required for; - Recording sound (at high quality): max 3

8、00 MB (approx.) - Storing scope data Frequency mode: max 5 MB (approx.) Time mode: max 1.5 MB (approx.) - Memory channel data: max 500 kB (approx.) SUPPLIED ACCESSORIES q Antenna 1 w AC adapter* 1 e USB cable 1 r CD 1 t Foot pad sheet 1 y Cable hanger 1 *Not supplied with some versions. y tre qw Mic

9、rosoft, Windows and Windows Media are registered trademarks of Microsoft Corporation in the U.S.A and other countries. Screen shots produced with per- mission from Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. All other products or brands are registered trademarks or

10、 trademarks of their respective holders. iii PRECAUTIONS RWARNING! NEVERconnect the OPC-254L to an AC outlet. This may pose a fi re hazard or result in an electric shock. NEVERexpose the receiver to rain, snow or any liquids. The receiver may be damaged. NEVERoperate or touch the receiver with wet h

11、ands. This may result in an electric shock or damage the receiver. AVOIDusing or placing the receiver in direct sunlight or in areas with temperatures below 0C (+32F) or above +60C (+140F). AVOIDthe use of chemical agents such as benzine or al- cohol when cleaning, as they can damage the receivers s

12、ur- faces. DO NOTuse the supplied CD for any other devices. The CD is for the IC-PCR1500/R1500, IC-PCR2500/R2500 only. DO NOTturn the main unit power OFF or disconnect the USB cable between the main unit and PC while IC-PCR1500 or IC-PCR2500 control software is running. This may result in the comput

13、er hang up. DO NOTstart vehicle engine while the IC-PCR1500 or IC- PCR2500 control software is running off of the vehicles ciga- rette lighter socket (optional CP-12L required). This may result in the computer hang up. DO NOTleave the main unit powered ON and connected to a vehicles electrical syste

14、m. The main unit draws approx. 550 mA. This will eventually drain the vehicles battery. For DC power operation (while connecting an OPC-254L or CP-12L) NEVERconnect the receiver to a power source of more than 14 V DC. This will damage the receiver. NEVERconnect the receiver to a power source using r

15、e- verse polarity. This will damage the receiver. NEVERcut the DC power cable between the DC plug and fuse holder. If an incorrect connection is made after cutting, the receiver may be damaged. If a connection cable is disconnected or has a loose connec- tion during operation, an error may occur. Co

16、nnect the con- nectors correctly, and DO NOTtouch the connectors during operation. ABOUT APCO PROJECT 25 iv For the operation of PC and peripheral devices, follow the in- structions provided in the manuals which come with the PC and peripheral devices. This device may cause signal interference when

17、used in a do- mestic setting. When interference occurs, move this unit as far as possible away from the affected device. All copyrights associated with this manual and all intellectual property rights associated with the hardware and software of the IC-PCR1500/PCR2500 are held by Icom Inc. Unauthori

18、zed reproduction or transmission of this manual, or any part hereof, is prohibited. The content of this manual, the hardware and software asso- ciated with the IC-PCR1500/PCR2500, and the appearance of the IC-PCR1500/PCR2500 are all subject to change with- out notice. For U.S.A. only CAUTION: Change

19、s or modifi cations to this device, not ex- pressly approved by Icom Inc., could void your authority to operate this device under FCC regulations. This device made under license under one or more of the fol- lowing US patents: #4,590,473, #4,636,791, #5,148,482, #5,185,796, #5,271,017, #5,377,229. T

20、he IMBE voice coding technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding technology is licensed solely for use within this communications equipment. The user of this te

21、ch- nology is explicitly prohibited from attempting to decompile, re- verse engineer, or disassemble the object code, or in any other way convert the object code into a human-readable form. U.S. Pat. nos. #5,870,405, #5,826,222, #5,754,974, #5,701,390, #5,715,365, #5,649,050, #5,630,011, #5,581,656,

22、 #5,517,511, #5,491,772, #5,247,579, #5,226,084, #5,195,166. P25 digital mode is available when the optional UT-122 DIG- ITAL UNITis installed to IC-PCR2500 or IC-R2500. v TABLE OF CONTENTS FOREWORD i IMPORTANT i EXPLICIT DEFINITIONS i MOUSE PROPERTY SETTING i SYSTEM REQUIREMENTS ii SUPPLIED ACCESSO

23、RIES ii PRECAUTIONS iii ABOUT APCO PROJECT 25 iv TABLE OF CONTENTS v 1INSTALLATION 13 Hardware installation 1 TNC connection 2 DC power supply connection 2 Accessory attachments 3 2DRIVER INSTALLATION 424 MicrosoftWindowsXP 4 MicrosoftWindows2000 10 MicrosoftWindows98SE 16 MicrosoftWindowsMe 20 3APP

24、LICATION INSTALLATION 2529 Installation 25 Launching the IC-PCR1500_2500 27 Uninstall 28 4PANEL DESCRIPTION 3043 Application screens (on PC screen) 30 Main unit 42 5BASIC RECEIVE FUNCTIONS 4467 Starting the control software 44 Changing the control screen 44 Closing the control screen 46 Quitting the

25、 control software 46 Receiving 47 Setting a frequency 48 Setting a tuning step 50 Audio level setting 52 Squelch level setting 53 Receive mode selection 54 Automatic mode selection 55 Monitor function 56 Mute function 56 Duplex operation 57 IF fi lter selection 58 AFC function 59 Attenuator function

26、 59 NB function 60 AGC function 60 VSC function 61 IF shift function 61 Weather channel operation (USA and CANADA versions only) 62 Squelch delay setting 63 Single band/Dualwatch operation (IC-PCR2500 only) 64 Diversity operation (IC-PCR2500 only) 66 Main/Sub band selection (IC-PCR2500 only) 67 6MEM

27、ORY CHANNELS 6879 General 68 Memory channel selection 68 Memory channel programming 70 Editing the memory list 72 Memory channel clearing 76 Saving memory channel data 78 Opening memory channel data 78 Creating new memory channel data fi le 78 Printing a memory channel 78 Importing a CSV fi le 79 Ex

28、porting a CSV fi le 79 7SCAN OPERATION (Multi function receiver/Component screens only) 8091 Scan types 80 Programmed scan 81 Auto memory write scan 84 Memory/bank scan 86 Versatile memory scan 88 Scan resume condition 90 Scan speed setting 91 8PRIORITY SCAN (Multi function receiver/Component screen

29、s only) 9293 Priority scan type 92 Priority scan operation 92 9TONE SQUELCH OPERATION (Multi function receiver/Component screens only)9497 Tone/DTCS operation 94 DTCS polarity setting 96 Pocket beep operation 96 Tone scan operation 97 10 BAND SCOPE (Multi function receiver/Component screens only)981

30、03 Operation 98 Pick up signal function 100 Saving the sweep data 100 Changing the automatic sweep step limit 102 Wide band scope function 103 Band scope options 103 vi 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 TABLE OF CONTENTS (Continued) vii 11 OTHER FUNCTION 104116 DTMF Operati

31、on 104 Audio setting screen 106 Multi channel monitor 110 Recording operation 112 Sampling Rate setting 114 Remote recording function 115 Short cut key operation 116 12 DSP OPERATION (Available only when the UT-106 is installed) 117 ANF function 117 NR function 117 13 DIGITAL MODE OPERATION (IC-PCR2

32、500 Main band only) 118124 Digital mode operation 118 DV mode setting 119 DV digital squelch function 120 P25 mode setting 121 P25 digital squelch function 122 Digital menu indication 123 14 OPTIONAL UNIT INSTALLATION AND OTHER 125128 Opening the top cover 125 UT-106 installation 125 UT-108/UT-118/U

33、T-122 installation (IC-PCR2500/R2500 only) 127 15 USB PORT SETTING 128129 USB port setting 128 USB audio setting 129 16 CLONING OPERATION (Available only when the IC-R1500 or IC-R2500 is connected) 130134 Launching the cloning software 130 Cloning operation 131 Data convert 132 17 TROUBLESHOOTING 13

34、5 18 SPECIFICATIONS AND OPTIONS 136137 Specifi cations 136 Options 137 19 DOC 138139 In this instruction manual, the screen shot contents may be different from the actual one. TABLE OF CONTENTS (Continued) 1 1INSTALLATION 1 Hardware installation Refer to the diagram below for connections. CAUTION: I

35、com Inc. assumes no responsibility for the re- ceivers operation resulting from the use of any other USB cable other than the one supplied by Icom in the original IC-PCR1500 or IC-PCR2500 package. NOTE: The antennas double sided tape may not adhere to all items. Additionally, the tape is not intende

36、d for multi- ple uses. Lastly, some items may be damaged by trying to remove the antenna holder once it has been taped into place. Icom Inc cannot accept any responsibility for any damage to any item caused by the supplied tape. IC-PCR2500 To ground Supplied antenna PC to USB port USB cable CP-12L (

37、optional) To a cigarette lighter socket To AC adapter R WARNING!: NEVER use a gas pipe or electrical con- duit pipe for grounding. Fuse (4 A) Or The antenna holder is backed with double-sided tape. Remove the protective paper when the antenna is fixed to any places. The dualwatch operation or divers

38、ity operation for IC-PCR2500 or IC-R2500 requires antennas connected to both ANT1 and ANT2. 2 1INSTALLATION TNC connection The IC-PCR1500/PCR2500 can receive 9600 bps packet communication (AFSK) with the use of a TNC (not supplied). Connect the TNC (Terminal Node Controller) as illustrated below. (O

39、ther connections are same as page 1.) DC power supply connection Use a 12 V DC power supply with at least 1.2 A capacity. Make sure the ground terminal of the DC power supply is grounded. OPC-254L (optional) black white R CAUTION! NEVER remove the fuse-holders from the DC power cable. Connect to a 1

40、2 V DC battery. Pay attention to polarities. NEVER connect to a 24 V bat- tery. This could dam- age the receiver. Solder Crimp NOTE: Use the terminals as shown below for the cable connections. D Fuse replacement IC-PCR2500 Fuses (4 A) DC power supply 12 V to an AC outlet ? PACKET GND 2-conductor 3.5

41、 (d) mm (18)/100 k D PACKET jack connection TNC IC-PCR2500 PC 3 1INSTALLATION 1 Accessory attachments D Foot pad Attach 4 foot pads to the bottom of the IC-PCR1500/ PCR2500 as below. D Cable hanger The cable hanger is convenient for fi xing a cable to the wall, etc. Cable Clinch the hook. Remove the

42、 protective paper. Foot pad sheet (supplied) IC-PCR2500 Foot pad Detach 4 foot pads from the foot pad sheet. 4 DRIVER INSTALLATION2 The displayed dialog boxes or indications may differ slightly from the following instructions according to your system conditions, or environment. MicrosoftWindowsXP NO

43、TE: Driver installation with CD is required when an ad- ditional Main unit is connected to the PC (i.e. 2 or more IC- PCR1500 or IC-PCR2500s (same model only) are connected to the PC). In such a case, install the driver as shown below. qQuit all applications when Windows is running. wConnect the Mai

44、n unit to the desired PCs USB port with the supplied USB cable. CAUTION: Icom Inc. assumes no responsibility for the receivers operation resulting from the use of any other USB cable other than the one supplied by Icom in the original IC-PCR1500 or IC-PCR2500 package. eInsert the CD into the appropr

45、iate CD drive. rTurn the Main unit power ON. The power indicator lights. “Found New Hardware” appears as below. tThe CP2101 USB device is detected automatically, and the “Found New Hardware Wizard” will come up as below. Select “Install from a list or specifi c location (Advanced),” then click Next.

46、 Click Select 5 2DRIVER INSTALLATION 2 ySelect “Search for the best driver in these locations.” then select “Include this location in the search,” click Browse. uClick “” of the CD drive folder in “My Computer.” The CD drive folder name (e.g. “D”) is depending on a PC. iClick “” of the “Driver” fold

47、er in the CD drive folder, then select “Win” folder. Click OK. Click Select Click Click Select Select 6 2DRIVER INSTALLATION oClick Next. !0The Wizard starts searching for the driver and shows the dialog below during search. !1After the driver is found, the “Hardware Installation” dialog box appears

48、 as below. Click Continue Anyway to start the installation. !2Windows starts installing the USB driver. Click Click 7 2DRIVER INSTALLATION 2 !3After the installation is completed, click Finish. !4The “Found New Hardware Wizard” will come up again to install the USB serial port driver. Select “Instal

49、l from a list or specifi c location (Advanced),” then click Next. !5Select “Search for the best driver in these locations.” then select “Include this location in the search:”, click Browse. !6Click “” of the CD drive folder in “My Computer.” The CD drive folder name (e.g. “D”) is depending on a PC. Click Click Select Select Click Select Click 8 2DRIVER INSTALLATION !7Click “” of the “Driver” folder i