IC-E90_user.pdf

《IC-E90_user.pdf》由会员分享，可在线阅读，更多相关《IC-E90_user.pdf（98页珍藏版）》请在收音机爱好者资料库上搜索。

1、This device complies with Part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. iE90 MULTIBAND FM TRAN

2、SCEIVER INSTRUCTION MANUAL WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CEL- LULAR RADIO TELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW. IC-E90-1.qxd 02.7.4 05:16 PM Page a (1,1) i New2001 Thank you for purchasing this Icom product. The IC-E90 MULTIBAND TRANSCEIVER is des

3、igned and built with Icoms superior technology and craftsmanship. With proper care, this product should provide you with years of trouble- free operation. The IC-E90 is a tri-band, 50 MHz, 144 MHz, 430 MHz FM transceiver that offers a wide-band AM, FM and WFM scan- ning receiver*. Not only you can h

4、ear your favorite TV pro- grams with the pre-programmed TV memories*, but you can also listen to short wave, AM and FM broadcast radio sta- tions, police, fi re, military, aircraft, various amateur bands and more. New DMS(Dynamic Memory Scan) bank scanning provides 555 alphanumeric memory channels,

5、including 50 band edges, with a maximum of 18 banks or 100 channels per bank. You can pick and choose any desired channel for scanning from the 500 memories. The supplied BP-217 LITHIUM-ION BATTERY PACKprovides full 5 W of output. Along with the energy conserving settings, the BP-217 provides up to

6、5 to 6 hours of operating time. The supplied MB-83 swivel type belt clip performs a quick draw like action for attaching/detaching the transceiver from the belt clip. The newly designed antenna also provides stable signal strength. We want to thank you for making your IC-E90 your radio of choice, an

7、d hope you agree with Icoms philosophy of “technology fi rst.” Many hours of research and development went into the design of your IC-E90. FEATURES Tri-band FM transceiver Wide-band receiver Covers 495 KHz to 999.990* MHz New DMS (Dynamic Memory Scan) bank scan Lithium-Ion technology Rugged palm siz

8、ed, weather-resis- tant construction DTCS and CTCSS tone squelch Simple operation *Available frequency range and/or the pre-pro- grammed TV memories may differ depends on ver- sion. See p. 85 for details. FOREWORD IC-E90-1.qxd 02.7.4 05:16 PM Page i (1,1) ii New2001 IMPORTANT READ ALL INSTRUCTIONSca

9、refully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL This in- struction manual contains important operating instructions for the IC-E90. EXPLICIT DEFINITIONS The explicit defi nitions below apply to this instruction manual. WORD WARNING CAUTION NOTE DEFINITION Personal i

10、njury, fire hazard or electric shock may occur. If disregarded, inconvenience only. No risk of personal injury, fire or electric shock. Equipment damage may occur. Icom, Icom Inc. and the logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, F

11、rance, Spain, Russia and/or other countries. SUPPLIED ACCESSORIES Accessories included with the transceiver:Qty. q Li-Ion battery pack (BP-217) . 1 w Wall charger* (BC-110D/DR) . 1 e MB-83 (Swivel belt clip) . 1 set r Handstrap. 1 tAntenna (FA-S6270D; with 50 MHz band adapter) . 1 set *Not supplied

12、with some versions. q w ert IC-E90-1.qxd 02.7.4 05:16 PM Page ii (1,1) iii WARNING RF EXPOSURE!This device emits Radio Frequency (RF) energy. Extreme caution should be observed when operating this device. If you have any ques- tions regarding RF exposure and safety standards please refer to the Fede

13、ral Communications Commission Office of Engineering and Technologys report on Evaluating Compliance with FCC Guidelines for Human Radio Frequency Electromagnetic Fields (OET Bulletin 65) WARNING! NEVERhold the transceiver so that the antenna is very close to, or touching exposed parts of the body, e

14、specially the face or eyes, while transmitting. The transceiver will perform best if the microphone is 1 to 2 in (2 to 5 cm) away from the lips and the transceiver is vertical. WARNING! NEVERoperate the transceiver with a headset or other audio accessories at high volume levels. Hearing experts advi

15、se against continuous high volume oper- ation. If you experience a ringing in your ears, reduce the vol- ume level or discontinue use. NEVER CONNECTa power supply of more than 11.5 V DC to the DC jack. The supply voltage must be between 10.5 V and 11.5 V to prevent damaging the trans- ceiver. NEVERc

16、onnect the transceiver to an AC outlet . Such a connection will damage the transceiver. NEVER connect the transceiver to a power source that is DC fused at more than 5 A. Accidental reverse connection will be protected by this fuse, but higher fuse values will not give protection against such accide

17、nts and the transceiver will be ruined. DO NOT operate the transceiver near unshielded electrical blasting caps or in an explosive atmosphere. AVOID using or placing the transceiver in direct sunlight or in areas with temperatures below 10C (+14F) or above +60C (+140F). RF output power is automatica

18、lly reduced to 0.5 W (Low) in cold environments (below 0C) while operating with the BP-217 Li-Ion battery pack, to protect the battery pack. Keep the bat- tery pack warm, then select high power again. (p. 28) The use of non-Icom battery packs/chargers may impair transceiver performance and invalidat

19、e the warranty. Even when the transceiver power is OFF, a slight current still fl ows in the circuits. Remove the battery pack or case from the transceiver when not using it for a long time. Otherwise, the battery pack or installed batteries will become exhausted. CAUTIONS IC-E90-1.qxd 02.7.4 05:16

20、PM Page iii (1,1) iv FOREWORD . i IMPORTANT . ii EXPLICIT DEFINITIONS . ii SUPPLIED ACCESSORIES . ii CAUTIONS . iii TABLE OF CONTENTS . iv qQUICK REFERENCE GUIDE . 16 wPANEL DESCRIPTION . 712 IPanel description . 7 IFunction display . 11 eBATTERY CHARGING . 1316 IBattery attachment . 13 IBattery cau

21、tions . 13 IRegular charging . 14 IRapid charging . 15 IBattery case . 16 IExternal power operation . 16 rBASIC OPERATION . 1733 ITurning power ON . 17 ITuning step . 18 ISetting a frequency . 19 IMode selection . 20 IOperating band and receive mode selection . 21 ISetting the squelch level . 22 IRe

22、ceiving . 23 IRIT function . 27 IAttenuator function . 27 ITransmitting . 28 IRepeater operation . 29 IDuplex operation . 31 ISplit operation . 32 I1750 Hz tone . 33 tMEMORY/CALL CHANNELS . 3444 IGeneral . 34 ICalling up memory channels . 36 IProgramming memory channels . 37 ITransferring memory con

23、tents to VFO . 38 ICopying memory contents . 39 IMemory names . 39 IMemory bank . 41 IMemory clear . 43 ICall channel . 44 ySCAN OPERATION . 4549 IScan types . 45 IVFO scan . 46 IFrequency skip function . 47 ISkip channel setting . 47 IMemory scan . 48 IScan notes . 49 uPRIORITY WATCH . 5054 IPriori

24、ty watch types . 50 IPriority alert . 50 IPriority watch operation . 51 iSET MODE . 5566 ISet mode . 55 ISet mode items . 56 oOTHER FUNCTIONS . 6778 IProgramming a DTMF code . 67 ITransmitting a DTMF code . 68 IClearing a DTMF memory . 69 IConfi rming a DTMF memory . 69 ITone frequency and DTCS code

25、 . 70 ITone/DTCS squelch . 71 IPocket beep function. 71 IAvailable tone frequencies . 72 IAvailable DTCS codes . 72 ITone scan . 73 IBeep tones . 74 IDial speed acceleration . 74 ILock function . 74 IMorse code synthesizer . 75 IPower save . 75 ITime-out timer . 76 IPTT lock . 76 IAuto power OFF . 7

26、6 IAuto power ON . 76 ICloning function . 77 ISP/MIC jacks . 77 IResetting . 78 !0HM-75A REMOTE CONTROL MICROPHONE . 79 !1TROUBLESHOOTING . 80 !2TV FREQUENCY TABLE .8184 !3SPECIFICATIONS . 8586 !4OPTIONS . 8788 POCKET GUIDE DOC TABLE OF CONTENTS qq ww ee rr tt yy uu ii oo !00 !11 !22 !33 !44 IC-E90-

27、1.qxd 02.7.4 05:16 PM Page iv (1,1) 1 QUICK REFERENCE GUIDE New2001 1 I Installing the battery pack q Open the latch. Then, attach the BP-217 Li-Ion battery pack or optional BP-216 battery case. Be sure to observe the correct direction. Charge Li-Ion battery pack before use. w Lock the latch. NOTE:

28、The battery pack is provided uncharged. BE SURE to charge the battery before using it with the transceiver. DInstalling the alkaline batteries Install 2 R6 (AA) size alkaline batteries into BP-216. Be sure to observe the correct po- larity. Keep battery contacts clean. Its a good idea to clean batte

29、ry ter- minals once a week. I Accessory attachment DAttaching the swivel belt clip The supplied swivel belt clip is useful for easy attaching/ detaching the transceiver to/from the belt. qAttach the stopper to the transceiver with the supplied screw. wClip the belt clip to your belt. Battery pack or

30、 battery case Latch q w stopper supplied screw IC-E90-1.qxd 02.7.4 05:16 PM Page 1 (1,1) 2 1QUICK REFERENCE GUIDE New2001 eInsert the transceiver to the end of the clip as shown at right. Once the transceiver is locked in place, it will swivel 360 degrees as shown at right. To remove: rTurn the tran

31、sceiver upside down, and then lift to release the transceiver from the belt clip as shown at upper right. DHandstrap Slide the handstrap through the loop on the top of the belt clip as shown at right. QUICK REFERENCE GUIDE qq iC-t90a CAUTION! HOLD THE TRANSCEIVER TIGHTLY, WHEN ATTACHING OR REMOVING

32、THE TRANSCEIVER TO/FROM THE BELT CLIP. If the transceiver accidentally dropped and the swivel belt clips stopper is scratched, the swivel belt clip may not work properly. IC-E90-1.qxd 02.7.4 05:16 PM Page 2 (1,1) 3 1QUICK REFERENCE GUIDE 50 MHz band adapter Attach the 50 MHz band adapter Hold the ba

33、se , then screw the antenna down. for BC band to 50 MHz band, through to 800 MHz band for WFM band to 800 MHz band Detach the top cap* *KEEP the the anttenna top cap in the safe place when it not in use. DInstalling the antenna Insert the supplied wide band antenna into the antenna con- nector and s

34、crew down the antenna as shown below. 50 MHz band adapter Attach the 50 MHz band antenna adapter before operating 50 M Hz band or receiving the signal below 50 MHz band. Be sure to use this 50 MHz band adapter during the operation below 50 MHz band. You can operate the whole band with this adapter.

35、CAUTION! TRANSMITTING WITHOUT AN ANTENNA MAY DAMAGE THE TRANSCEIVER. NEVER HOLDthe anten- na when carrying the trans- ceiver. KEEPthe jack covers at- tached when the jack is not in use, to avoid bad con- tacts from dust and mois- ture. NOTE: Commercially available antennas may increase transceiver p

36、erformance. An optional AD-92SMAANTENNA CONNECTOR ADAPTERis available to connect an external antenna with a BNC connector. IC-E90-1.qxd 02.7.4 05:16 PM Page 3 (1,1) 4 1QUICK REFERENCE GUIDE I Charging the Li-Ion battery pack DCharging with the wall charger q Push and hold PWR to turn the transceiver

37、 power OFF. w Insert the charger plug into the DC power jack of the trans- ceiver. e Plug the charger into an AC wall outlet. r Charging starts and the battery indicator “” on the dis- play blinks. t It takes approximately 15 hours to charge an empty BP- 217 Li-Ion battery pack. y Unplug the charger

38、 from the AC wall outlet when charging is completed. DCharging with the CP-19E Cigarette Lighter cable (option) q Insert the cigarette lighter adapter cable into the DC power jack of the transceiver. w Connect the CP-19E cigarette lighter adapter cable to the cigarette lighter socket. e Charging sta

39、rts and the battery indicator on the display blinks. NOTE: The BP-217 can be charged while you operating the transceiver. (p. 5). Charging will be suspended during transmitting of the transceiver. “CHG_F” appears when the charging is completed with the power turned OFF. NEVER connect the cigarette l

40、ighter socket or external regulated DC power supply directly to the transceiver. Such a connection will damage the transceiver. Remove CP-19E from the transceiver when not using it. Otherwise, the vehicle battery will become exhausted. IC-E90 with BP-217 BC-110D/DR to DC power jack to AC outlet CP-1

41、9E (optional) to DC power jack to a 12 V cigarette lighter socket QUICK REFERENCE GUIDE qq IC-E90-1.qxd 02.7.4 05:16 PM Page 4 (1,1) 5 1QUICK REFERENCE GUIDE I Rapid charging The optional BC-139 provides rapid charging of the battery pack. CAUTION: To avoid damage to the transceiver, turn the transc

42、eiver OFF while charging. Charging period: 2.5 hours (w/BP-217) I External power operation An optional CP-19E cigarette lighter cable can be used for external power operation from cigarette lighter socket. Power supply range is between 5.511.0 V DC. NEVER connect over 11.5 V DC directly into the DC power jack of the transceiver. BE SUR