ID-51A_E_user.pdf

《ID-51A_E_user.pdf》由会员分享，可在线阅读，更多相关《ID-51A_E_user.pdf（413页珍藏版）》请在收音机爱好者资料库上搜索。

1、ADVANCED MANUAL ID-51A ID-51E VHF/UHF TRANSCEIVER TROUBLESHOOTING 15 REPEATER AND DUPLEX OPERATIONS 14 PRIORITY WATCH 13 SCAN OPERATION 12 MEMORY OPERATION 11 VOICE MEMORY FUNCTION 10 GPS OPERATION 9 D-STAR OPERATION 8 D-STAR OPERATION 7 D-STAR INTRODUCTION 6 BC RADIO OPERATION 5 BASIC OPERATION 4 B

2、ATTERY CHARGING 3 PANEL DESCRIPTION 2 USING A MICROSD CARD 1 ACCESSORY ATTACHMENT 16 MENU SCREEN 17 OTHER FUNCTIONS 18 OPTIONS 19 SPECIFICATIONS INDEX INTRODUCTION To update the repeater list, click here! Instructions for advanced operations and additional details are described in this manual. See t

3、he Basic manual to begin D-STAR, especially for new users. INDEX FOR MENU ITEMS i INTRODUCTION Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or othe

4、r countries. Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other products or brands are registered trademarks or trademarks of their respective holders. About these Advanced Manual (PDF format)

5、 These Advanced Manual describe the details of the ID-51A/E features. This PDF formatted manual provides you with convenient functions, as follows. 15REPEATER AND DUPLEX OPERATIONS 15-4 Duplex operation The Duplex operation shifts the transmit frequency up or down from the receive frequency by an of

6、fset amount. D Setting the frequency offset qPush V/MHz to select the VFO mode. wPush MENU. e Push D-pad() to select the root item (“DUP/ TONE.”), and then push D-pad(Ent). D-pad () (Ent) r Push D-pad() to select the “Offset Freq,” and then push D-pad(Ent). t Rotate DIAL to set the frequency offset

7、to be- tween 0.000.00 and 59.99500 MHz, and then push D-pad(Ent). (Setting example: 1.000.00 MHz) The selected tuning step in the VFO mode is used when setting the frequency offset. Pushing V/MHz toggles the tuning digit, as shown below. TS*1 MHz10 MHz * The frequency changes according to the preset

8、 tuning steps. (p. 5-8) y Push MENU to exit the MENU screen. To reset to the default value. Push QUICK in step t as described above, then push D-pad(Ent) to reset to the default value. The current frequency offset Rotate DIAL, then push D-pad(Ent). Push QUICK Push D-pad(Ent) DIAL The current frequen

9、cy offset NOTE: The frequency offset cannot be changed while using the DR function. - cy offset. Depending on the frequency offset value, the off band indication, “OFF,” appears on the display when PTT is pushed. (p. 15-5) Previous view The Auto repeater function uses the preset frequen Example: Whe

10、n the cursor is moved over V/MHz in the description, a red circle appears around the ap- propriate key(s). (p. 15-5) Move to the page, if clicked. The screen shots at the right column, correspond to the operating instructions and procedures shows both setting and operating example. select the “Offse

11、t Freq,” and then the frequency offset to be- 59.99500 MHz, and then push (Setting example: 1.000.00 MHz) step in the VFO mode is used when setting the frequency offset. toggles the tuning digit, as shown The current frequency offset Shows a term description When the mouse cursor is moved over a ter

12、m which is highlighted in yellow, the description of the term is displayed. 15REPEATER AND DUPLEX OPERA Previous view Move to the previously read page. Click Previous view at the left top on an each page, to move back to the previ- ously read page. Shows the location of keys When the cursor is moved

13、 over a term with a red underline, a red circle appears around the appro- priate key(s) on the illustration of the transceiver. D Setting the frequency offset qPush V/MHz to select the VFO mode wPush MENU. e Push D-pad() to select the root item TONE.”), and then push D-pad(Ent). Previous view ii INT

14、RODUCTION Functions and features of Adobe Acrobat Reader The following functions and features can be used with Adobe Acrobat Reader. Keyword search Click “Find” (Ctrl+F) or “Advanced Search” (Shift+Ctrl+F) in the Edit menu to open the search screen. This is convenient when search- ing for a particul

15、ar word or phrase in this manual. * The menu screen may differ, de- pending on the Adobe Acrobat Reader version. Find screen Advanced search screen Click to open the fi nd or search screen or advanced search screen. Printing out the desired pages. Click “Print” in File menu, and then select the pape

16、r size and page numbers you want to print. * The printing setup may differ, depending on the printer. Refer to your printers instruction manual for details. * Select A4 size to print out the page in the equal- ized size. Read Out Loud feature. The Read Out Loud feature reads aloud the text in this I

17、nstruction Manual. Refer to the Adobe Acrobat Reader Help for the details. ( This feature may not be usable, depending on your PC environment including the operating system.) * The screen may differ, depending on the Adobe Acrobat Reader version. Previous view 1-1 Section 1ACCESSORY ATTACHMENT Anten

18、na . 1-2 Battery pack . 1-2 Belt clip . 1-3 Hand strap . 1-3 Previous view 1ACCESSORY ATTACHMENT 1-2 Antenna Insert the antenna connector into the antenna base and tighten the antenna. Battery pack To attach or detach the battery pack: Attach or detach the battery pack or battery case, as illustrate

19、d to the right. See page 4-2 for details of the battery pack. To attachTo detach q w q q w Antenna Battery pack or battery case Illustration shows the battery pack is attached. NOTE: Even when the transceiver power is OFF, a small current still fl ows in the transceiver. Remove the battery pack or c

20、ase from the transceiver when not using it for a long time. Otherwise, the battery pack or installed batteries will become exhausted. The battery protection function automatically sets transceiver to Low1 power (0.5 W) when the temper- ature is around 0C (+32F) or below. In this case, transmit power

21、 selections (High, Mid and Low2) are disabled. TIP: Third-party antennas may increase transceiver performance. An optional AD-92SMA ANTENNA CON- NECTOR ADAPTER is available to connect an antenna that has a BNC connector. (p. 18-3) NEVER carry the transceiver by holding only the an- tenna. Previous v

22、iew 1ACCESSORY ATTACHMENT 1-3 Belt clip To attach the belt clip: q Remove the battery pack from the transceiver, if it is attached. (p. 1-2) w Slide the belt clip in the direction of the arrow until the belt clip locks in place, and makes a click sound. To detach the belt clip: q Remove the battery

23、pack from the transceiver, if it is attached. (p. 1-2) w Lift the tab up (q), and slide the belt clip in the direc- tion of the arrow (w). Hand strap To facilitate carrying the transceiver, slide the hand strap through the loop on the top of the rear panel, as illustrated to the right. Hand strap q

24、w Tab Belt clip To attachTo detach Battery pack or battery case Previous view 2-1 Section 2USING A microSD CARD About the microSD card . 2-2 Saving data onto the microSD card . 2-2 Inserting the microSD card . 2-3 D Formatting the microSD card . 2-4 Removing the microSD card . 2-5 Saving data onto a

25、 microSD card . 2-6 Saving with a different fi le name . 2-8 Loading the saved data fi les that are on the microSD card. 2-10 Backing up the data stored on the microSD card onto a PC . 2-12 D About the microSD cards folder . 2-12 D Making a backup fi le on your PC . 2-13 Importing or Exporting a CSV

26、 format fi le . 2-14 D Importing . 2-14 D Exporting . 2-15 Previous view 2USING A microSD CARD 2-2 About the microSD card The microSD and microSDHC cards are not available from Icom. User supplied. A microSD card of up to 2 GB or a microSDHC of up to 32 GB, can be used with the ID-51A/E. Icom has ch

27、ecked the operation with the following mi- croSD and microSDHC cards. (As of September 2016) BrandTypeMemory size SanDisk microSD2 GB microSDHC 4 GB 8 GB 16 GB 32 GB The above list does not guarantee the cards perfor- mance. Through the rest of this document, the microSD and a microSDHC cards are si

28、mply called microSD cards or the cards. Icom recommends that you format all microSD cards to be used with the transceiver, even preformatted mi- croSD cards for PCs or other uses. The following data can be stored onto the card: Transceiver data Memory channel contents, Repeater List, Your (UR) call

29、sign memory and GPS memory that are stored in the transceiver. Communication audio The transmitted and received audio. Communication log The communication and receive history log. Automatic answering voice audio in the DV mode Voice audio to use with the Auto Reply function in the DV Mode. Voice aud

30、io for the Voice TX function Voice audio to use with the Voice TX function. Position data from the GPS receiver Position and time data from a GPS receiver that is in a log fi le as a route. Voice Recorder The microphone audio. Saving data onto the microSD card NOTE: Before using the microSD card, re

31、ad the microSD card instructions thoroughly. If you do any of the following, the microSD card data may be corrupted or deleted. - Remove the microSD card from the transceiver while accessing the microSD card. - Change the external power source voltage while accessing the microSD card. - Start the ve

32、hicle engine while accessing the mi- croSD card. - Drop, impact or shake the microSD card. Do not touch the contacts of the microSD card. The transceiver takes a longer time to recognize a high capacity microSD card. The microSD card will get warm if used continuously for a long period of time. The

33、microSD card has a certain lifetime, so data reading or writing may not be possible after using it for a long time period. When reading or writing data is impossible, the microSD cards lifetime has ended. In this case, purchase a new one. We recommend that you oc- casionally make a backup fi le of t

34、he important data onto your PC. Icom is not responsible for any damage caused by data corruption of a microSD card. TIP: Occasionally saving the data is recommended. Insert the card into the transceivers slot, and then enter the Menu screen. (MENU SD Card Save Setting) (p. 16-95) Previous view 2USIN

35、G A microSD CARD 2-3 qTurn OFF the transceiver. w Lift OFF the micro SD slot cover on the side panel. e With the terminals facing the front, insert the card into the slot until it locks in place, and makes a click sound. DO NOT touch the terminals. rCompletely close the micro SD slot cover. CAUTION:

36、 After a microSD card is inserted, completely close the micro SD slot cover as shown to the right. WrongCorrect Close the cover, leaving no gap. Terminals facing the front microSD card micro SD slot Inserting the microSD card Slot cover NEVER forcibly or in- versely insert the card. It will damage t

37、he card and/or the slot. NOTE: If you use a brand new microSD card, format it, by doing the steps below. Formatting a card erases all its data. Before for- matting any card with data on it, make a backup fi le on your PC. Previous view 2USING A microSD CARD 2-4 Inserting the microSD card (Continued)

38、 D Formatting the microSD card qTurn ON the transceiver. wPush MENU . e Push D-pad() to select the root item (“SD Card”), and then push D-pad(Ent). D-pad () (Ent) r Push D-pad() to select “Format,” and then push D- pad(Ent). The dialog “Format OK?” appears. t Push D-pad() to select “YES,” and then p

39、ush D- pad(Ent) to format. The formatting starts and the display shows the format- ting progress. NEVER turn OFF the power while formatting. y After formatting, the display automatically returns to the SD CARD menu. u Push MENU to exit the MENU screen. Appears when the microSD card is inserted. Show

40、s the formatting progress Previous view 2USING A microSD CARD 2-5 Removing the microSD card qTurn OFF the power. w Lift OFF the micro SD slot cover on the side panel. e Push in the microSD card until a click sounds, and then carefully pull it out. DO NOT touch the terminals. rCompletely close the mi

41、cro SD slot cover. CAUTION: After a microSD card is inserted, completely close the micro SD slot cover as shown to the right. WrongCorrect Close the cover, leaving no gap. To remove the microSD card while the transceivers power is ON, do the following steps. qPush MENU . w Push D-pad() to select the

42、 root item (“SD Card”), and then push D-pad(Ent). D-pad () (Ent) e Push D-pad() to select “Unmount,” and then push D-pad(Ent). The dialog “Unmount OK?” appears. r Push D-pad() to select “YES,” then push D-pad(Ent) to unmount. t When unmounting is completed, “Unmount is com- pleted.” is displayed, an

43、d then the screen automati- cally returns to the SD CARD menu. y Push MENU to exit the MENU screen. u Lift OFF the micro SD slot cover on the side panel. i Push in the microSD card until a click sounds, and then carefully pull it out. DO NOT touch the terminals. oCompletely close the micro SD slot c

44、over. Slot coverSlot cover Push the microSD card until a click sounds. Pull the microSD card out. Previous view 2USING A microSD CARD 2-6 Memory channels, item settings in the menu screen, and Repeater List can be saved on the microSD card. Saving data on the microSD card allows you to eas- ily rest

45、ore the transceiver to its previous confi guration, even if an All reset is performed. TIP: Data is saved in the “icf” fi le format that is used in the CS-51PLUS2 cloning software. The saved data on the microSD card can be copied onto a PC and edited with the cloning software. Data can be saved as a

46、 new fi le or to overwrite an older fi le. Saved as a new fi le qPush MENU . w Push D-pad() to select the root item (“SD Card”), and then push D-pad(Ent). D-pad () (Ent) e Push D-pad() to select “Save Setting,” and then push D-pad(Ent). r Push D-pad() to select “,” and then push D-pad(Ent). The FILE NAME screen is displayed. The fi le name is automatically named in the following for- mat; Setyyyymmdd_xx (yyyy: Year, mm: month, dd: day, xx: serial number) Example: If a 2nd fi le is saved on October 1, 2016, the