ID-RP2000V_ID-RP4000V_broch.pdf

《ID-RP2000V_ID-RP4000V_broch.pdf》由会员分享，可在线阅读，更多相关《ID-RP2000V_ID-RP4000V_broch.pdf（4页珍藏版）》请在收音机爱好者资料库上搜索。

1、VHF DIGITAL RF MODULE UHF DIGITAL RF MODULE ID-RP2000V Imagine a world where you can get a VHF and UHF repeater pair! Or when VHF and UHF DX does not require a band opening! Or even a plug and play repeater system that gives you functionality and capabilities that no other radio service in the world

2、 can offer! This dream has become a reality with Icoms ID-RP2000V and ID-RP4000V D-STAR modules. Whether you are a repeater owner wanting to experiment in the digital world or a club who wants more from their repeater network, D-STAR is defi nitely the future of amateur radio. ID-RP4000V DIGITAL VOI

3、CEDIGITAL DATA | ID-1| D-PRS | AUTO I.D. | INTERNET ACCESS | CROSSBANDING 128kbps Data 1kbps Data / Voice | ID-1 VOICE| | ID-1| | Internet | e-mail | ID-RP2C | | ID-RP2D 23cm | | ID-RP2V 23cm | orrouteror gateway server i GATEWAY ID-RP2C: With the capability of han- dling up to four RF modules, the

4、ID-RP2C repeater controller is the cornerstone of the D-STAR repeater system. This includes basic in-band as well as crossband opera- tion between any of the four digital voice RF modules. In addition to basic control of the RF modules, the RP2C also provides linking capabilities through the interne

5、t and future 10GHz backbone products. RF Modules: ID-RP2D: (23cm Data) One of the most powerful functions of D-STAR is the ability to move data. The ID-RP2D provides an access point with a data rate of 128kbps. Depending on the sys- tem setup, the 128kbps is perfect for setting up an e-mail and/or f

6、i le server for EmComm support. Its also perfect for connecting to the internet for web applications or support. Whether you use the 128kbps for e-mail or fi le servers, connecting to an internet source via a router will give you the capa- bility of checking out the radar from the National Weather S

7、ervice or National Hur- ricane Center. Digital Voice: No room for another repeater pair? No problem for the Icom D-STAR repeaters! In addition to the 128kbps data, D-STAR incorporates the power of digital voice and 1kbps data mode on 2m, 70cm, and 23cm. The spectral effi ciency, crystal clarity, and

8、 the ability of repeating data and voice communications on a single 6.25 kHz channel is some- thing yet to be seen in any other radio service! With this capability, expand the number of repeaters available in your area. The power of D-STAR offers fl exibility and system growth! | ID-RP2000V 2m | | I

9、D-RP4000V 70cm | | N5MIJ | Icoms D-STAR compatible repeaters modules: RP2V: (23cm) RP4000V: (70cm) RP2000V: (2m) Crossband Operation: Finally, a commercially available legal crossband repeater! With proper callsign programming in any D-STAR compatible mobile or portable, the Icom D-STAR repeaters wi

10、ll automati- cally route your signal to any other RF module connected to a common RP2. With simple repeater commands, you can direct your communica- tions through any of the RF modules. Repeater Confi guration: There are three distinct repeater confi gurations currently available. Local: This confi

11、guration is very similar to most analog repeater systems without any linking or internet requirements or capabilities, and is primarily used for Digital Voice and 1kbps operations. Local with Internet: Expand to the local repeater with the addition of the ID-RP2D and a simple DSL connection through

12、a router. While this allows internet connectivity with an ID-1, there is no control over who is able to use the internet connection. (Interconnection with other remote users is not possible.) Gateway: This is the ultimate D-STAR confi guration providing a controlled internet connection as well as li

13、nking to other repeaters installed into a common D-STAR network. All users of the DV (digital voice) gateway of 128kbps internet connection must be registered in one of the D-STAR networked repeaters. ( NOTE: A static IP address is required to set up a gateway D-STAR repeater. A few examples of a ga

14、teway network can be seen on www.dstarusers.org website.) ID-RP2000 | IC-91A IC-91AD | | ID-800H | TEXT MESSAGING | DIGITAL VOICE TX 1240-1300 MHz ID-RP2V: RX 1240-1300 MHz; TX 1240-1300 MHz Type of emission ID-RP2D: F1D (GMSK) ID-RP2V: F1D (GMSK) F7W for system operation Frequency stability: 2.5 pp

15、m (based on 25 C; +77 F) Frequency resolutions: 5/6.25 kHz Antenna connector: Type-N (impedance: 50) Communication speed ID-RP2D: 128 kbps ID-RP2V: 4.8 kbps Power supply requirement: 13.8 V DC 15% (negative ground) Current drain ID-RP2D: TX (high) Less than 6.0 A TX (low) Less than 2.7 A RX stand-by

16、 Less than 0.7 A ID-RP2V: TX (high) Less than 7.0 A TX (low) Less than 3.0 A RX stand-by Less than 1.0 A Usable temperature range: -10 C to +50 C; +14 F to + 122 F Dimensions (proj. not incl.): 483(W)x88(H)x428(D) mm; 19(W)x3 15/32x16 27/32(D) in. Weight (approx.): ID-RP2D: 6.2 kg; 13 lb 10 oz ID-RP

17、2V: 7.5 kg; 16 lb 9 oz TRANSMIT POWER (at 13.8 V DC) ID-RP2D: High 9-12 W Low 0.5-1.2 W ID-RP2V: High 6-12 W Low 0.5-1.2 W Modulation system: Quadrature (243.95 MHz) Occupied bandwidth ID-RP2D: Less than 130 kHz ID-RP2V: Less than 5.5 kHz Spurious emissions: Less than -50 dB Receive system ID-RP2D:

18、Double-conversion superheterodyne ID-RP2V: Triple-conversion superheterodyne RECEIVER Intermediate freq. ID-RP2D: 1st 243.95 MHz 2nd 10.7 MHz 3rd N/A ID-RP2V: 1st 243.95 MHz 2nd 31.05 MHz 3rd 450 kHz Sensitivity (BER 1x10-2) ID-RP2D: Less than 2.24 V ID-RP2V: Less than 0.45 V Selectivity ID-RP2D: Mo

19、re than 140 kHz/6 dB; Less than 520 kHz/40 dB ID-RP2V: More than 6 kHz/6 dB; Less than 18 kHz/50 dB Receive spurious: Less than -57 dBm Spurious and image Rejection ratio: More than 60 dB (General); More than 50 dB (IF and IF/2) GENERAL Frequency range ID-RP2000V: 144-148 MHz ID-RP4000V: 440-450 MHz

20、 Type of emission: F1D (GMSK); F7W with ID-RP2C Frequency stability ID-RP2000V: 0.3 kHz (at 25C; +77F) ID-RP4000V: 0.8 kHz (at 25C; +77F) Frequency resolutions: 5/6.25 kHz Antenna impedance: 50 (type-N) Transmission speed: 4.8 kbps (Voice 2400 bps, FEC 1200 bps, data 952 bps) Power supply requiremen

21、t: 13.8 V DC 15% (negative ground) Current drain TX High/Low: Less than 7.0/3.0A RX Stand-by: Less than 0.7A Operation temp. range: -10 C to +50 C; +14 F to +122 F Dimensions (proj. not incl.): 483(W)x88(H)x428(D) mm; 19(W)x3 15/32x16 27/32(D) in. Weight (approx.): 7.5 kg; 16 lb 9 oz TRANSMITTER Out

22、put power: 25-30W (high)/2-3W (low) Modulation system: Quadrature modulation (244.8 MHz) Occupied bandwidth: Less than 6.25 kHz Spurious emissions: Less than -60 dB RECEIVER Intermediate freq. ID-RP2000V: 46.35 MHz/450 kHz (1st/2nd) ID-RP4000V: 70.00 MHz/455 kHz (1st/2nd) Sensitivity: Less than 0.45

23、V BER 1x10-2 Adjacent Ch. Selectivity: More than 65 dB (10 kHz offset) Intermodulation rejection ratio: More than 65 dB (20 kHz/40 kHz) Receive Spurious: Less than -57 dBm Spurious image rejection: More than 70 dB Specifi cations described below are target values. They may be subject to change. SPECIFICATIONS COMPATIBILITY CHART WITH ICOM DIGITAL TRANSCEIVERS IC-91AD or IC-91A + UT-121 ID-800HIC-2200H + UT-118 IC-V82 + UT-118 IC-U82 + UT-118 IC-2820H + UT-123 IC-92ADID-1 (1.2GHz) ID-RP2000V- ID-RP4000V- ID-RP2V/2D-