IC-7300_user_full.pdf

《IC-7300_user_full.pdf》由会员分享，可在线阅读，更多相关《IC-7300_user_full.pdf（173页珍藏版）》请在收音机爱好者资料库上搜索。

1、FULL MANUAL i7300 INDEX 15 UPDATING THE FIRMWARE 14 MAINTENANCE 13 OTHER FUNCTIONS 12 SET MODE 11 ANTENNA TUNER OPERATION 10 SCANS 9 MEMORY OPERATION 8 USING AN SD CARD 7 VOICE TX MEMORY OPERATION 6 VOICE RECORDER FUNCTIONS 5 SCOPE OPERATION 4 RECEIVING AND TRANSMITTING 3 BASIC OPERATION 2 INSTALLAT

2、ION AND CONNECTIONS 1 PANEL DESCRIPTION 16 SPECIFICATIONS 17 OPTIONS 18 CONNECTOR INFORMATION 19 CONTROL COMMAND ABOUT CE INTRODUCTION HF/50 MHz TRANSCEIVER i Thank you for choosing this Icom product. The IC-7300 HF/50 MHz TRANSCEIVER is designed and built with Icoms state of the art technology and

3、craftsmanship. With proper care, this product should provide you with years of trouble-free operation. We appreciate you making the IC-7300 your transceiver of choice, and hope you agree withIcomsphilosophyof“technologyirst.”Manyhoursofresearchanddevelopmentwentintothedesignof your IC-7300. FEATURES

4、 RF Direct Sampling System The IC-7300 employs an RF direct sampling system. RF signals are directly converted to digital data and processed in the FPGA. This system is a leading technology marking an epoch in amateur radio. Real-Time Spectrum Scope The spectrum scope is class-leading in resolution,

5、 sweep speed and dynamic range. When you touch the scope screen on the intended signal, the touched area is magniied.Thelarge4.3inchcolorTFTtouchLCDoffers intuitive operation. New “IP+” Function The new IP Plus function improves 3rd order intercept point (IP3) performance. When a weak signal is rece

6、ived adjacent to strong interference, the AD converter is optimized against signal distortion. Class Leading RMDR and Phase Noise Characteristics The RMDR is improved to about 97dB (typical value) and Phase Noise characteristics are also improved about 15dB (at 1 kHz frequency separation) compared t

7、o the IC-7200. A 4.3 inch touch screen color display A built-in automatic antenna tuner Multi-function control for easy settings SUPPLIED ACCESSORIES L Different types of accessories may be supplied, or may not be supplied depending on the transceiver version. WORDDEFINITION R DANGER! Personal death

8、, serious injury or an explosion may occur. R WARNING! Personal injury, fi re hazard or electric shock may occur. CAUTIONEquipment damage may occur. NOTE Recommended for optimum use. No risk of personal injury, fi re or electric shock. EXPLICIT DEFINITIONS IMPORTANT READ ALL INSTRUCTIONS carefully c

9、ompletely before using the transceiver. SAVE THIS INSTRUCTION MANUAL This instruction manual contains full operating instructions for the IC-7300. Hand microphone (HM-219) DC power cable* (3 m: 9.8 ft) Spare fuse (25 A) Spare fuse (30 A) Spare fuse (5 A) CD Speaker plug (3.5 mm: 1/8 Stereo) CW key p

10、lug (6.35 mm: 1/4 Stereo) ACC plug (13 pin) ThisproductincludesRTOS“RTX”software,andis licensed according to the software license. Thisproductincludes“zlib”opensourcesoftware, and is licensed according to the open source software license. Thisproductincludes“libpng”opensourcesoftware, and is license

11、d according to the open source software license. RefertotheTextilesintheLicensefolderof included CD for information on the open source software being used by this product. *For European versions ii FOR CLASS B UNINTENTIONAL RADIATORS: This equipment has been tested and found to comply with the limit

12、s for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accorda

13、nce with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

14、equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to w

15、hich the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. DISPOSAL The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechar

16、geable batteries) must be taken to designated collection locations at the end of their work- ing life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area. FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is su

17、bject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS

18、PROHIBITED UNDER FCC RULES AND FEDERAL LAW. CAUTION:Changesormodiicationstothisdevice, not expressly approved by Icom Inc., could void your authority to operate this device under FCC regulations. Icom is not responsible for the destruction or damage to the Icom transceiver, if the malfunction is bec

19、ause of: Forcemajeure,including,butnotlimitedto,ires,earthquakes,storms,loods,lightnings,orothernatural disasters, disturbances, riots, war, or radioactive contamination. The use of Icom transceiver with any equipment that is not manufactured or approved by Icom. TRADEMARKS Icom, Icom Inc. and the I

20、com logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand and/or other countries. Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States

21、 and/or other countries. Adobe and Adobe Reader are registered trademark of Adobe Systems Incorporated. All other products or brands are registered trademarks or trademarks of their respective holders. iii ABOUT THE TOUCH SCREEN D Touch operation In the Full manual or Basic manual, the touch operati

22、on is described as shown below. Touch Ifthedisplayistouchedbriely,oneshortbeep sounds. Touch for 1 second If the display is touched for 1 second, one short and one long beep sound. D Touch screen precautions The touch screen may not properly work when the LCDprotectionilmorsheetisattached. Touchingt

23、hescreenwithyouringernails,sharp topped object and so on, or touching the screen hard may damage it. TabletPCsoperationssuchaslick,pinchinand pinch out cannot be performed on this touch screen. D Touch screen maintenance If the touch screen becomes dusty or dirty, wipe it clean with a soft, dry clot

24、h. When you wipe the touch screen, be careful not to pushittoohardorscratchitwithyouringernails. Otherwise you may damage the screen. The following items are included on the CD. Full manual (English) Instructions for full operations, the same as this manual. Basic manual (English) Instructions for b

25、asic operations, the same manual supplied with the transceiver. Basic manual (German, Spanish, French, Italian, and other) Instructions for basic operations in German, Spanish, French, Italian, and other languages. This manual may not be included, depending on the transceiver version. Schematic diag

26、ram Includes the schematic and block diagrams. HAM radio Terms A glossary of HAM radio terms. Adobe Reader Installer Installer for Adobe Reader. A PC with the following Operating System is required. Microsoft Windows 10 Microsoft Windows 8.1 Microsoft Windows 7 Microsoft Windows Vista To read the ma

27、nuals or Schematic diagram, Adobe Reader is required. If you have not installed it, please install the Adobe Reader on the CD or download it from Adobe Systems Incorporateds website. Starting the CD 1. Insert the CD into the CD drive. 2. Doubleclick“Menu.exe”ontheCD. Depending on the PC setting, the

28、 menu screen shown below is automatically displayed. 3. Click the desired button to open the file. L To close the Menu screen, click Quit. Closes the Menu screenInstalls the Adobe Reader Opens the Full manual (this manual) Opens the Schematic diagram Opens the Glossary ABOUT THE SUPPLIED CD Opens th

29、e English Basic manual Opens the multi- language Basic manual L Different types of menu screen may be displayed, depending on the transceiver version. iv Functions and features of Adobe Reader The following functions and features can be used with Adobe Reader. Keyword search Click “Find(Ctrl+F)” or

30、“Advanced Search (Shift+Ctrl+F)”intheEditmenu to open the search screen. This is convenient when searching for a particular word or phrase in this manual. * The menu screen may differ, depending on the Adobe Reader version. Find screen Advanced search screen Clicktoopentheindorsearch screen or advan

31、ced search screen. Printing out the desired pages. Click “Print(P)”inFilemenu,andthenselectthe paper size and page numbers you want to print. * The printing setup may differ, depending on the printer. Refer to your printers instruction manual for details. * Select“A4”sizetoprintoutthepageinthe equal

32、ized size. Read Out Loud feature. The Read Out Loud feature reads aloud the text in this Instruction Manual. Refer to the Adobe Reader Help for the details. ( This feature may not be usable, depending on your PC environment including the operating system.) *The screen may differ, depending on the Ad

33、obe Reader version. v ABOUT THE INSTRUCTIONS Instruction example MENU SET Display Display Type Detailed instruction 1. Push MENU. Push Opens the MENU screen. 2. Touch SET. MENU screen Opens the SET screen. 3. Rotate MULTI, and then push MULTI to select “Display.” Rotate Push 4. Rotate MULTI, and the

34、n push MULTI to select “DisplayType.” SET screen Rotate Push The Full and Basic manuals are described based on the following: “ ” (Quotation marks): Used to indicate icons, setting items, and screen titles displayed on the screen. The screen titles are also indicated in uppercase letters. (Example:

35、FUNCTION screen) (brackets): Used to indicate keys. Routes to the set modes and setting screens Routes to the set mode, setting screen and the setting items are shown in the following manner. DISPLAY screen “DisplayType”screen vi PRECAUTIONS R DANGER HIGH RF VOLTAGE! NEVER touch an antenna or antenn

36、a connector while transmitting. This could cause an electrical shock or burn. R DANGER! NEVER operate the transceiver near unshielded electrical blasting caps or in an explosive atmosphere. This could cause an explosion and death. R WARNING RF EXPOSURE! This device emits Radio Frequency (RF) energy.

37、 Extreme caution should be observed when operating this device. If you have any questions regarding RF exposure and safety standards please refer to the Federal Communications Commission OficeofEngineeringandTechnologysreporton Evaluating Compliance with FCC Guidelines for Human Radio Frequency Elec

38、tromagnetic Fields (OET Bulletin 65). R WARNING! NEVER operate the transceiver with a headset or other audio accessories at high volume levels. If you experience a ringing in your ears,reduce the volume or discontinue use. R WARNING! NEVER apply AC power to the DC13.8V socketonthetransceiverrearpane

39、l.Thiscouldcauseaire or damage the transceiver. R WARNING! NEVER apply more than 16 V DC to the DC13.8V socket on the transceiver rear panel. This could causeaireordamagethetransceiver. R WARNING! NEVER reverse the DC power cable polarity.Thiscouldcauseaireordamagethetransceiver. R WARNING! NEVER re

40、move the fuse holder on the DC power cable. Excessive current caused by a short could causeaireordamagethetransceiver. R WARNING! NEVER let metal, wire or other objects contact the inside of the transceiver, or make incorrect contact with connectors on the rear panel. This could cause an electric sh

41、ock or damage the transceiver. R WARNING! NEVER operate or touch the transceiver with wet hands. This could cause an electric shock or damage to the transceiver. R WARNING! Immediately turn OFF the transceiver power and remove the DC power cable from the transceiver if it emits an abnormal odor, sou

42、nd or smoke. Contact your Icom dealer or distributor for advice. R WARNING! NEVER put the transceiver on an unstable place where the transceiver may suddenly move or fall. This could cause an injury or damage the transceiver. R WARNING! NEVER operate the transceiver during a lightning storm. It may

43、result in an electric shock, cause aireordamagethetransceiver.Alwaysdisconnectthe power souce and antenna before a storm. CAUTION: NEVER expose the transceiver to rain, snow or any liquids. CAUTION: NEVER change the internal settings of the transceiver. This could reduce transceiver performance and/

44、or damage to the transceiver. The transceiver warranty does not cover any problems caused by unauthorized internal adjustments. CAUTION: NEVER install or place the transceiver in a place without adequate ventilation, or block any cooling vents on the top, rear, sides or bottom of the transceiver. He

45、at dissipation may be reduced and damage the transceiver. CAUTION: NEVER use harsh solvents such as Benzine or alcohol when cleaning, as they will damage the transceiver surfaces. CAUTION: NEVER leave the transceiver in areas with temperatures below 10C (+14F) or above +60C (+140F) for mobile operat

46、ions. CAUTION: NEVER place the transceiver in excessively dusty environments. This could damage the transceiver. DO NOT place the transceiver against walls or putting anything on top of the transceiver. This may overheat the transceiver. BE CAREFUL! The Main unit will become hot when operating the t

47、ransceiver continuously for long periods of time. CAUTION:Ifyouusealinearampliier,setthe transceivers RF output power to less than the linear ampliiersmaximuminputlevel,otherwiseahighinput coulddamagethelinearampliier. CAUTION: Use only Icom supplied or optional microphones. Other manufacturers micr

48、ophones may have different pin assignments, and could damage the connector and/or the transceiver. NEVER leave the transceiver in an insecure place to avoid use by unauthorized persons. Turn OFF the transceivers power and/or disconnect the AC power cable when you will not use the transceiver for a l

49、ong period of time. Turn OFF the transceivers power and/or disconnect the DC power cable when you will not use the transceiver for long period of time. The LCD display may have cosmetic imperfections that appear as small dark or light spots. This is not a malfunction or defect, but a normal characteristic of LCD displays. 1-1 Section 1PANEL DESCRIPTION Front panel . 1-2 Rear panel .