IC-E92D_user.pdf

《IC-E92D_user.pdf》由会员分享，可在线阅读，更多相关《IC-E92D_user.pdf（156页珍藏版）》请在收音机爱好者资料库上搜索。

1、INSTRUCTION MANUAL iE92D VHF/UHF DIGITAL TRANSCEIVER i FOREWORD Thank you for purchase of this fi ne Icom product. We under- stand you have a choice of many different radios in the mar- ket place. Many hours of research and development went into the design of your IC-E92D, following Icoms philosophy

2、 of “technology fi rst.” The IC-E92D VHF/UHF DIGITAL TRANSCEIVER is designed with Icoms superior technology and craftsmanship combining traditional analog technologies with the new digital D-STAR technologies for a balanced packaged. With proper care, this product should provide you with years of tr

3、ouble-free operation. We want to take a couple of mo- ments of your time to thank you for making your IC-E92D your radio of choice, and hope you agree with Icoms phi- losophy of “technology fi rst.” EXPLICIT DEFINITIONS FEATURES DV mode (Digital voice + Low-speed data communication) operation ready

4、Text message and call sign exchange Transmitting position data with a third- party GPS receiver (You can also use HM-175GPS) Waterproof construction (IPX7) GPS receiver connectable Optional HM-175GPS is required Simple band scope Dualwatch operation Optional PC remote control IMPORTANT READ ALL INST

5、RUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL This in- struction manual contains important operating instructions for the IC-E92D. WORD DEFINITION R-WARNING! CAUTION NOTE Personal injury, fire hazard or electric shock may occur. Equipment damage may occ

6、ur. Recommended for optimum use. No risk of personal injury, fi re or electric shock. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 RWARNING RF EXPOSURE! This device emits Radio Frequency (RF) energy. Caution should be observed when operating this device. If you have any questions re- garding RF exposure a

7、nd safety standards please refer to the Federal Communications Commission Office of Engi- neering and Technologys report on Evaluating Compliance with FCC Guidelines for Human Radio Frequency Electro- magnetic Fields (OET Bulletin 65) RWARNING! NEVER hold the transceiver so that the antenna is very

8、close to, or touching exposed parts of the body, especially the face or eyes, while transmitting. The transceiver will perform best if the microphone is 5 to 10 cm away from the lips and the transceiver is vertical. RWARNING! NEVER operate the transceiver with an earphone, headphones or other audio

9、accessories at high volume levels. Hearing experts advise against continu- ous high volume operation. If you experience a ringing in your ears, reduce the volume level or discontinue use. RWARNING! NEVER operate the transceiver while driving a vehicle. Safe driving requires your full attention anyth

10、ing less may result in an accident. NEVER connect the transceiver to a power source of more than 16 V DC. This will ruin the transceiver. NEVER connect the transceiver to a power source using reverse polarity. This will ruin the transceiver. DO NOT operate the transceiver near unshielded electri- ca

11、l blasting caps or in an explosive atmosphere. DO NOT push the PTT when not actually desiring to trans- mit. BE CAREFUL! The transceiver will become hot when operating it continuously for long periods. DO NOT use or place the transceiver in direct sun- light or in areas with temperatures below 20C o

12、r above +60C. Place the unit in a secure place to avoid inadvertent use by children. DO NOT use of chemical agents such as benzine or al- cohol when cleaning, as they can damage the transceivers surfaces. 17 18 19 ii PRECAUTIONS iii PRECAUTIONS D Important notes when using GPS receiver Please do not

13、 use the HM-175GPS close the TX antenna. The transmit signal may cause GPS receiver malfunction. The GPS signal cannot pass through the metal object. When using the HM-175GPS inside a vehicle, you may not receive GPS signal. We recommend to use it window side. Please avoid the areas shown in the fol

14、lowing: 1. DO NOT use where it will block the drivers view. 2. DO NOT use where the air bags could deploy. 3. DO NOT use it when becoming the obstacle of driving. The Global Positioning System (GPS) is built and operated by the U.S. Department of Defence. The Department is responsible for accuracy a

15、nd maintenance of the system. Any changes by the Department may affect the accuracy and function of the GPS system. When the GPS receiver is activated, please do not cover the HM-175GPS with any object. The GPS receiver may not work if used in the following lo- cations: 1. Tunnels or high-rise build

16、ings 2. Underground parking lot 3. Under a bridge or viaduct 4. In remote forested areas 5. Under bad weather condition (rainy or cloudy day) SUPPLIED ACCESSORIES The following accessories are supplied with the transceiver. q Hand strap 1 w Antenna 1 e Battery pack (BP-256) 1 r Battery charger (BC-1

17、67D) 1 t Belt clip (with screws) 1 set r eq t w iv NOTICES D Using the optional HM-175GPS Noise signals from the HM-175GPS may interfere with the IC-E92Ds AM radio or HF band reception. In this case, set the HM-175GPSs microphone cable as distant to the antenna as far as possible, or turn off the HM

18、- 175GPS. D Data output from HM-175GPS The optional HM-175GPS outputs GPS data (position data, etc.) to the IC-E92D at intervals while receiving only. Therefore, the transceiver is not updated GPS data while transmitting. The transceiver transmits GPS data that was received just prior to the last tr

19、ansmission in the DV mode . D About OPC-1797 NEVER connect the optional OPC-1797 CONNECTION CABLE with non-Icom article specifi ed. When connecting a 2.5 (d) mm monaural plug to the micro- phone jack, it acts as short and becomes a cause of failure. Turn power OFF when connecting or disconnecting th

20、e OPC-1797. Icom, Icom Inc. and the logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. APRS is a registered trademark of Mr. Bob Bruninga in the U.S.A. and other countries. 1 2 3 4 5 6 7 8 9 10

21、11 12 13 14 15 16 17 18 19 Microsoft, Windows and Windows Vista are either registered trade- marks or trademarks of Microsoft Corporation in the United States and/or other countries. v FOREWORD i EXPLICIT DEFINITIONS i FEATURES i IMPORTANT i PRECAUTIONS ii, iii SUPPLIED ACCESSORIES iii NOTICES iv TA

22、BLE OF CONTENTS vvii 1 ACCESSORY ATTACHMENT 1 Antenna 1 Belt clip 1 Hand strap 1 Battery pack 1 2 PANEL DESCRIPTION 27 Front, top and side panels 2 Function display 6 3 BATTERY CHARGING 813 Caution 8 Regular charging 10 Rapid charging11 Optional battery case 12 Battery information 12 External DC pow

23、er operation 13 4 FREQUENCY AND CHANNEL SETTING 1419 Main band selection 14 Mode selection15 Operating band selection 16 Setting a tuning step 18 Setting a frequency 18 5 BASIC OPERATION 2028 Receiving 20 Setting audio volume 20 Setting squelch level 21 Operating mode selection 21 Monitor function 2

24、2 Attenuator function 22 Band scope 23 Transmitting 24 Transmit power selection 24 Lock function 25 Dualwatch operation 25 TV channel operation 28 6 REPEATER AND DUPLEX OPERATIONS 2933 General 29 Accessing a repeater 30 Duplex operation 32 1750 Hz tone 33 7 DV MODE OPERATION 3459 Digital mode operat

25、ion 34 Call sign programming 34 Digital voice mode operation 38 About the D-STAR system 40 Digital repeater operation 41 Received call sign 46 Copying the call sign 48 Break-in communication 51 Message operation 52 Automatic reply function 54 EMR (Emergency) communication 56 TABLE OF CONTENTS vi Low

26、-speed data communication 56 Other function for DV mode operation 58 8 GPS/GPS-A OPERATION 6070 GPS operation 60 GPS set mode items 68 GPS-A operation 70 9 MEMORY/CALL CHANNELS 7181 General description71 Selecting a memory channel 72 Selecting a call channel 73 Memory channel programming 74 Memory b

27、ank setting 75 Memory bank selection 76 Programming memory/bank/scan name 77 Selecting memory/bank name indication 78 Copying memory/call contents79 Memory clearing 80 Erasing/transferring bank contents 81 10 SCAN OPERATION 8289 Scan types 82 Full/band/programmed scan 83 Scan edges programming 84 Me

28、mory scan 85 Memory bank scan 86 Skip channel/frequency setting 87 Scan resume condition 89 11 PRIORITY WATCH 9092 Priority watch types 90 Priority watch operation 91 12 MENU SCREEN OPERATION 93116 General 93 MENU screen indication for A band 94 MENU screen indication for B band 94 Menu list 94 Item

29、s list 94 Set mode items 96 DV set mode items 100 Scan set mode items 108 DUP/TONE set mode items 110 Display set mode items 112 Sounds set mode items 115 13 OTHER FUNCTIONS 117131 Programming a DTMF code 117 Transmitting a DTMF code 118 Clearing a DTMF memory 119 Confi rming a DTMF memory 120 Setti

30、ng DTMF transfer speed 120 Tone frequency and DTCS code 121 Digital code and digital call sign setting 122 Tone/DTCS squelch 124 Digital code/digital call sign squelch 124 Pocket beep function 125 DTCS polarity setting 125 Tone scan126 Beep tones127 Dial speed acceleration 127 Key lock effect 127 Po

31、wer save 129 Auto power OFF128 TABLE OF CONTENTS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 vii TABLE OF CONTENTS Auto power ON 128 Time-out timer 128 PTT lock 128 Font size 129 Display backlighting 129 LCD contrast 129 Cloning function 130 Resetting131 14 TROUBLESHOOTING 132 15 SPECIFICATIONS

32、133134 16 OPTIONS 135137 Optional HM-75A REMOTE CONTROL SPEAKER MICROPHONE 136 Connecting to the DATA/SP/MIC jack 137 INDEX 138143 17 CE 146147 WATERPROOF NOTICES BE CAREFUL! The transceiver employs waterproof con- struction, which corresponds to IPX7 of the international standard IEC 60529 (2001).

33、However, once the transceiver has been dropped, waterproofing cannot be guaranteed due to the fact that the transceiver may be cracked, or the water-proof seal damaged, etc. MAKE SURE the DATA/SP/MIC connector cap, flexible antenna and battery pack are securely attached to the transceiver, and that

34、the DATA/SP/MIC connector cap, antenna and battery pack are dry before attachment. Ex- posing the inside of the transceiver to water will result in serious damage to the transceiver. After exposure to water, clean the battery contacts thoroughly with fresh water and dry them completely to remove any

35、 water or salt residue. NEVER remove or insert the battery pack when the trans- ceiver is wet or soiled. This may result water or dust get- ting into the transceiver/battery pack and may result in the transceiver being damaged. IMPORTANT: KEEP the transceivers DATA/SP/MIC con- nector cap attached wh

36、en the speaker-microphone is not in use. If the cover is not attached, water will get into the transceiver. More over, the terminals (pins) will become rusty, or the transceiver will function abnormally if the con- nector has become wet. NEVER immerse the connector in water. If the connector becomes

37、 wet, be sure to dry it BEFORE attaching it to the transceiver. 1 1ACCESSORY ATTACHMENT 1 Antenna Insert the supplied antenna into the antenna connector and screw down the antenna as shown at left. NEVER carry the transceiver by holding the antenna. KEEP the jack cover attached when jack is not in u

38、se to protect the con- nector from dust and water. For your information Third-party antennas may increase transceiver perform- ance. An optional AD-92SMA ANTENNA CONNECTOR ADAPTER is available to connect an antenna with a BNC connector. Belt clip Hand strap Slide the hand strap through the loop on t

39、he top of the belt clip as illustrated at left to facilitate carrying the transceiver. Battery pack Attach the Li-Ion battery pack (BP-256) or battery case (BP-257) as illustrated below. Charge the Li-Ion battery pack before use. (pgs. 10, 11) Jack cover Handstrap Supplied screws* *NOTE: USE the sup

40、plied screws only. Using screws longer than specified could damage the transceiver. q w Battery pack/Battery case Latch CAUTION!: NEVER attach or detach the battery pack when wet. Be careful when releasing the latch. Because the latch is tightly locked, dont use a finger nail to open it you may inju

41、re yourself. Instead, use something relatively flat, like the edge of a coin or the tip of a screwdriver, to carefully release the latch. 2 PANEL DESCRIPTION2 Front, top and side panels q ANTENNA CONNECTOR (p. 1) Connects the supplied antenna. An optional AD-92SMA adapter (p. 135) is available for c

42、on- necting an antenna with a BNC connector. w TX/RX INDICATOR TX/RX (p. 24) Lights green while receiving a signal or when the squelch is open; lights red while transmitting. e PTT SWITCH PTT (p. 24) Push and hold to transmit, release to receive. r SQUELCH KEY SQL Push and hold to open the squelch t

43、emporarily and monitor the operating frequency. (p. 22) While pushing and holding this key, rotate DIAL to adjust the squelch level. (p. 21) t MAIN/DUAL KEY MAIN/DUAL Push to toggle the main band between A and B bands. (p. 26) Push and hold for 1 sec. to toggle the dualwatch func- tion ON and OFF. (

44、p. 25) y POWER KEY PWR Push and hold for 1 sec. to turn the transceiver power ON and OFF. (p. 20) u BAND KEY BAND During VFO mode operation, push to select an operat- ing frequency band. (pgs. 16, 17) During memory bank mode, push to select a memory bank. (p. 76) Enters or sends the DTMF code D. (pg

45、s. 117, 119) MAIN BAND REC MENU VFO MR CALL 123 456 789 . 0 DUAL SCOPESCANLOWMODEMHz S.MW RX CS CQM.NAMESKIP DUP TONETSDTMF.MT.SCAN DSQ CSCD# C B A CLRA/a D PWR q Speaker u Function display Internal microphone i y t r e w !3 !0 o !1 !2 !4 !5 !6 3 2PANEL DESCRIPTION 2 i KEYPAD (pgs. 4, 5) o CALL/RXCS

46、 KEY CALL/RXCS(CALL) Push to select the call channel/TV channel. (pgs. 16, 28) During DV mode operation, push and hold for 1 sec. to set the received call signs (station and repeaters) for operation. (p. 47) Enters or sends the DTMF code C. (pgs. 117, 119) !0 MEMORY/SELECT MEMORY WRITE KEY MR/ S.MW(

47、MR) Push to select memory mode. (p. 15) During memory mode operation, push to toggle be- tween memory and memory bank mode. (p. 76) Push and hold for 1 sec. to enter select memory write mode. (p. 74) Enters or sends the DTMF code B. (pgs. 117, 119) !1 VFO/MHz KEY VFO/MHz(VFO) Push to toggle select V

48、FO mode. (p. 15) During VFO mode operation, push and hold for 1 sec. to select and toggle 1 MHz and 10 MHz tuning steps. (p. 18) Enters or sends the DTMF code A. (pgs. 117, 119) !2 MENU/LOCK KEY MENU/LOCK Push to toggle menu screen indication ON and OFF. (p. 93) Push and hold for 1 sec. to toggle th

49、e lock function ON and OFF. (p. 25) !3 EXTERNAL DC IN JACK DC IN Connects the supplied wall charger, BC-167D, to charge the attached battery pack. (p. 10) Connect an external DC power supply through the op- tional CP-12L, CP-19R or OPC-254L for external DC operation. (p. 13) !4 VOLUME CONTROL VOL Rotate to adjust the audio output level. (p. 20) !5 CONTROL DIAL DIAL Rotate to tune th