Kenwood_micro-processor_reset_procedures.pdf
《Kenwood_micro-processor_reset_procedures.pdf》由会员分享,可在线阅读,更多相关《Kenwood_micro-processor_reset_procedures.pdf(4页珍藏版)》请在收音机爱好者资料库上搜索。
1、Kenwood Micro-Processor Reset Procedures 1. TM-201A/401A/211A/411A - Depress the reset switch with a non conductive rod through the reset opening on the bottom cover. 2. TM-221A/321A/421A/521A With the power off press the VFO/M, & M.IN keys, and turn the radio on. 3. TM-231A/331A/431A/531A With the
2、power off press the MR key, and turn the power on. 4. TM-241A/441A/541A With the power off press the MR/M key, and turn the power on. 5. TM-2530A/2550A/2570A/3530A With the power off press the PS key, and turn the power on. 6. TM-701A With the power off press the MR key, and turn the radio on. 7. TM
3、-621A/721A With the power off press the F key, and turn the radio on. 8. TM-631A/731A With the power off press the MR key, and turn the radio on. 9. TM-641A/741A/941A With the power off A. VFO Reset Individual Band: Press the VFO key, & the Band Sel, and turn the Radio on. B. All Band VFO Reset: Pre
4、ss the VFO key, and turn the radio on. C. All Band MEMORY Reset: Press the MR key, and turn the radio on. D. Individual Memory Band Reset: Press the F key, & BAND SEL key, and turn the power on. 10. TM-642A/742A/942A With the power off A. VFO Reset Individual Band: Press the VFO key, & the Band Sel,
5、 and turn the radio on. B. All Band VFO Reset: Press the VFO key, and turn the radio on. C. All Band MEMORY Reset: Press the MR key, and turn the radio on. D. Individual Memory Band Reset: Press the F key, & BAND SEL key, and Turn the radio on. 11. TM-251A/451A With the radio off A. Partial reset pr
6、ess the VFO key, and turn the radio on. B. Full reset press the MR key, and turn the radio on. 12. TM-732A VFO Reset with the power off press the VFO key, and turn the radio on. Memory reset with the power off press the MR key, and turn the radio on. 13. TM-733A Partial Reset single band press the V
7、FO, & BAND SEL key, and turn the radio on. Partial Reset Both Bands press the VFO key, and turn the radio on. TM-733A Full Reset with the radio off press the MR key, and turn the radio on. The OK-MR-KEY flashes in the display, now press the MR again to complete the reset procedure. 14. TM-255A/455A
8、Partial reset with the power off press the A/B key, and turn turn the radio on. Full reset press the MR key, and turn the radio on. 15. TR-7930/7950 To reset the radio turn the radio upside down, there is a hole in the bottom cover near the front , press the microswitch for reset. 16. TW-4000A Turn
9、on power and set the transceiver in receive mode. Short the 2P terminal once for the microprocessor reset. Used a non conductive object. There is a small hole in the bottom cover close to the front panel, and centered In the middle of the radio. (WHEN RESETTING BE SURE NOT TO SHORT ANY PINS OTHER TH
10、AN 2P TERMINAL TO PREVENT THE MICRO- PROCESSOR FROM BEING DAMAGED) 17. TW-4100A With the power off press the M key, and turn the power on. 18. TR-50 With the power on use a non conductive object to reset the radio through a small hole in the bottom cover. 19. TR-751A/851A With the power off press th
11、e M key, and turn the radio on. 20. TR-2600A/3600A With the power on insert a non-metallic rod into the small hole in the backside of the case close to the battery to reset. 21. TR-2500A/3500A With the power on insert a non-metallic rod into the small hole in the backside of the case close to the ba
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Kenwood_micro processor_reset_procedures
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


