AN-PRC-1077_user.pdf

《AN-PRC-1077_user.pdf》由会员分享，可在线阅读，更多相关《AN-PRC-1077_user.pdf（52页珍藏版）》请在收音机爱好者资料库上搜索。

1、PRC1077-MSOP PRC1077 Radio Set Operator Manual Datron World Communications Inc. Manual Part No. PRC1077-MSOP Release Date: March 2007 Revision: C 3030 Enterprise Court Vista, CA 92081, U.S.A. Phone: (760) 597-1500 Fax: (760) 597-1510 E-Mail: PRC1077-MSOPi Change Description Date of Revision Revision

2、 Letter Description of Changes Pages Affected 6/1991AOriginal releaseAll 6/2006BOverall update to text and format.All 3/2007CChanged cable part number part number from C991611 to C991618. Added protective power cap to replacement parts table. Page 2-22 Figure 2-14 Page 4-4 PRC1077-MSOPiii 2003 Datro

3、n World Communications, Inc. (Datron) All rights reserved. Datron World Communications, Inc. This manual, as well as the software described in it, is furnished under license and may only be used or copied in accordance with the terms of such license. The information in this manual is furnished for i

4、nformational use only, is subject to change without notice, and should not be construed as a commitment by Datron. Datron assumes no responsibility or liability for any errors or inaccuracies that may appear in this book. Except as permitted by such license, no part of this publication may be reprod

5、uced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, recording, or otherwise without the prior written permission of Datron. Software License Agreement and Warranty This software is licensed to the user (licensee) under the express terms and condit

6、ions of Datrons software licensing policies and agreement as outlined below. By receiving and installing this software package the user (licensee) has indicated acceptance of the terms and conditions of this agreement presented herewith. As used in this document, the term “Software” shall mean the a

7、pplication or control software in machine readable format and the hardware protection key, along with any or all supporting documentation, as well as all updated or enhanced versions of the program supplied to the user at later date(s). This software license does not include source code, and there-

8、fore, no license is granted with respect to source code of any kind utilized directly or indirectly in any Datron or Datron supplied third party product. Note, in some cases, covered software may be included in Datron products in RAM or ROM, and/or forms of machine readable code, not readily accessi

9、ble to the user or licensee. In consideration of the terms and conditions of this agreement, Datron grants the user a non-exclusive, nontrans- ferable license to install and operate one copy of the program. Licensee agrees not to attempt, aid, authorize, or direct any effort, either directly or indi

10、rectly to reverse engineer or reverse compile the Software. Licensee further agrees they or their agents are not authorized to make derivative versions or changes to the Software. Title to and ownership of the Software shall at all times remain with Datron and/or its licensors. Further, no license i

11、s granted to copy or reproduce in any form whatsoever the Software supplied without the express written permission of Datron, prior to any such contemplated action. Datron may terminate this agreement and discontinue further warranty coverage at any time due to failure to comply with the terms and c

12、onditions of this agreement. In such an event, Datron will provide the user with written notice of such a “failure-to-comply” and the user will have 10 days to demonstrate that a remedy has been implemented. If the user fails to perform, the agreement will be terminated by further written notice fro

13、m Datron. Upon termination, the user shall immediately return all original Software, documentation, and any copies of each to Datron. This Software is licensed “AS IS” and Datron provides a war- ranty that covers the media upon which the Software is embed- ded for a period of 30 days from receipt of

14、 the product. Under this warranty policy Datrons sole obligation shall be to replace or repair, at Datrons discretion, any such media that in Datrons opinion proves defective. The user is obligated to provide Datron with a detailed description of possible defects along with sample material such that

15、 Datron can reproduce the identified defects. By receipt and use, user (licensee) acknowledges that certain software developed or distributed by Datron is controlled by one or more governmental agencies. The user (licensee) herewith acknowledges they will take all necessary actions to comply with ap

16、plicable regulations concerning the use of licensed software. Further, Datron is under no obligation to supply source code or documentation of its software for any reason. Datron makes no representation, express or implied, with respect to any Software licensed under this document as to its fitness

17、for any particular purpose or intended use. Furthermore, Datron shall have no liability under this agreement for any incidental, special, or consequential damages arising out of the use of any supplied software programs. Datron reserves the right to make periodic changes in its software for any purp

18、ose without any obligation to notify users. One Year Limited Warranty and Remedies Datron warrants that its equipment is free from defects in design, materials, and workmanship for a period of 12 months from the date of installation of the equipment, but in no event later than 15 months from the dat

19、e of shipment. If the equipment does not provide satisfactory service due to defects covered by this warranty, Datron will, at its option, replace or repair the equipment free of charge. Should it be impractical to return the equipment for repair, Datron will provide replacements for defective parts

20、 contained in the equipment for a period of 12 months from the date of installation of the equipment, but in no event later than 15 months from the date of shipment. This warranty is limited to the original purchaser and is not transferable. Repair service performed by Datron is warranted for the ba

21、lance of the original warranty or 90 days, whichever is longer. Exclusive Warranty: There are no other warranties beyond the warranty as contained herein. No agent, employee, or representative of Datron has any authority to bind Datron to any affirmation, representation, or warranty concerning the e

22、quipment or its parts that is not in conformity with the warranties contained herein. EXCEPT AS EXPRESSLY SET FORTH ABOVE, NO OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TO THE EQUIPMENT OR THE PARTS CONTAINED ivPRC1077-MSOP THEREIN, INCLUDING BUT NOT LIMITED TO THE IMPLIED WA

23、RRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND DATRON EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED HEREIN. Limitations of Warranty: This warranty does not cover: Physical damage to the equipment or its parts that does not involve defects in design, material, or workmanship, i

24、ncluding damage by impact, liquids, temperature, or gases. Damage to the equipment or its parts caused by lightning, static discharge, voltage transients, or application of incorrect supply voltages. Defects or failures caused by unauthorized attempts to repair or modify the equipment. Defects or fa

25、ilures caused by Buyer abuse or misuse. Return of Equipment - Domestic: To obtain performance of any obligation under this warranty, the equipment must be returned freight prepaid to the Technical Support Services. Datron World Communications Inc., 3030 Enterprise Court, Vista, California 92081. The

26、 equipment must be packed securely. Datron shall not be responsible for any damage incurred in transit. A letter containing the following information must be included with the equipment. a. Model, serial number, and date of installation. b. Name of dealer or supplier of the equipment. c. Detailed ex

27、planation of problem. d. Return shipping instructions. e. Telephone or fax number where Buyer may be contacted. Datron will return the equipment prepaid by United Parcel Service, Parcel Post, or truck. If alternate shipping is specified by Buyer, freight charges will be made collect. Return of Equip

28、ment - International: Contact Datron or your local Representative for specific instructions. Do not return equipment without authorization. It is usually not possible to clear equipment through U.S. Customs without the correct documentation. If equipment is returned without authorization, Buyer is r

29、esponsible for all taxes, customs duties, clearance charges, and other associated costs. Parts Replacement: The following instructions for the supply of replacement parts must be followed: a. Return the parts prepaid to “Parts Replacement” Datron World Communications Inc., 3030 Enterprise Court, Vis

30、ta, California 92081; and b. Include a letter with the following information: 1. Part number 2. Serial number and model of equipment 3. Date of installation Parts returned without this information will not be replaced. In the event of a dispute over the age of the replacement part, components date-c

31、oded over 24 months previously will be considered out of warranty. Remedies: Buyers sole remedies and the entire liability of Datron are set forth above. In no event will Datron be liable to Buyer or any other person for any damages, including any incidental or consequential damages, expenses, lost

32、profits, lost savings, or other damages arising out of use of or inability to use the equipment. 1/95 Safety Considerations This product and manual must be thoroughly understood before attempting installation and operation. To do so without proper knowledge can result in equipment failure and bodily

33、 injury. Caution: Before applying ac power, be sure that the equipment has be properly configured for the available line voltage. Attempted operation at the wrong voltage can result in damage and voids the warranty. See the manuals section on installation. DO NOT operate equipment with cover removed

34、. Earth Ground: All Datron products are supplied with a standard, 3-wire, grounded ac plug. DO NOT attempt to disable the ground terminal by using 2-wire adapters of any type. Any disconnection of the equipment ground causes a potential shock hazard that could result in personal injury. DO NOT opera

35、te any equipment until a suitable ground has been established. Consult the manual section on ground- ing. Servicing: Trained personnel should only carry out servicing. To avoid electric shock, DO NOT open the case unless qualified to do so. Various measurements and adjustments described in this man-

36、 ual are performed in ac power applied and the protective covers removed. Capacitors (particularly the large power supply electrolytics) can remain charged for a considerable time after the unit has been shut off. Use particular care when working around them, as a short circuit can release sufficien

37、t energy to cause damage to the equipment and possible injury. To protect against fire hazard, always replace line fuses with ones of the same current rating and type (normal delay, slow-blow, etc.). DO NOT use higher value replacements in an attempt to prevent fuse failure. If fuses are failing rep

38、eatedly this indicates a probable defect in the equipment that needs attention. Use only genuine Datron factory parts for full performance and safety of this product. Made in the USA PRC1077-MSOPv CONTENTS Chapter 1: Introduction The PRC1077 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39、. . . . . . . . . . . . . . . . . . . . . . 1-1 Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Chapter 2: Installation Unpacking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40、 . 2-1 Location Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Manpack Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Figure 2-1. BB-LA6 Battery Installation . . . . . . . . . . . .

41、. . . . . . . . . . . . . . . . . . . . . . . . 2-3 Figure 2-2. Manpack Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Figure 2-3. Manpack Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Figure 2-4.

42、AT-892/U Antenna Orientation in Various User Positions. . . . . . . . . . . . . 2-7 Mobile Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 Figure 2-5. Typical 5W 24 Vdc Mobile System with MT-1077-24 Adapter. . . . . . . . . 2-8 Figure 2-

43、6. 5W 24 Vdc Mobile System with OA3633/VRC Adapter . . . . . . . . . . . . . 2-10 Figure 2-7. 50W 24 Vdc Mobile System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 Figure 2-8. 50W 12 Vdc Mobile System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44、 2-13 Fixed Base Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15 Figure 2-9. 5W Fixed Base System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15 Figure 2-10. 50W Fixed Base System . . . . . . . . . . . . . .

45、. . . . . . . . . . . . . . . . . . . . . . . 2-17 Battery Charger Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19 Figure 2-11. PRC-PS Power Supply/Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . 2-19 Figure 2-12. PRC-BC4 Multiple Bat

46、tery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20 Figure 2-13. PRC-HC-30 Hand Crank Generator with Battery Installed. . . . . . . . . . . 2-21 Figure 2-14. PRC-HC-30 Hand Crank Generator with Battery Connected Directly . . 2-22 Figure 2-15. PRC-SPU-10 Solar Power Generator wi

47、th Battery Installed. . . . . . . . . . 2-22 Figure 2-16. PRC-SPU-10 Solar Power Generator with Battery Connected Directly . 2-23 Chapter 3: Operation Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Figure 3-1. Front Panel Con

48、trols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Settings, Indications and Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Presetting Channel Frequencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49、 . . 3-4 Jamming Recognition and Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 Radio Set Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 Voice Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 Chapter 4: Maintenance Preventative Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Figure 4-1. PRC1077 Replacement Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .