TS-2000_X_B-2000_broch.pdf

《TS-2000_X_B-2000_broch.pdf》由会员分享，可在线阅读，更多相关《TS-2000_X_B-2000_broch.pdf（10页珍藏版）》请在收音机爱好者资料库上搜索。

1、TS-2000/2000X TS-B2000 All-Mode Multibander All-mode multibander: HF/50/144/440/1200MHz* in one compact rig offering wide-band receive (500kHz to 1300MHz, non-contiguous) and 100W output (HF/50/144MHz) ideal for both base station use and mobile operation. *TS-2000 do not attempt to install it yourse

2、lf. Black box version: The TS-B2000 can be used exclusively for computer control or in a vehicle with a remote head*. *Optional RC-2000 mobile controller Dual-channel receive: Featuring an all-mode multiband transceiver (with satellite mode) plus a sub 144/440MHz FM/AM receiver, so two frequencies (

3、HF/50/144/440/1200*: ALL MODE + 144/440MHz: FM/AM) can be received simultaneously, even on the same band (144/440MHz). * With optional UT-20 1200MHz all-mode unit Digital signal processing: IF-DSP (main band) combines with AF-DSP (sub band) to provide preci- sion filtering and interference reduction

4、. Satellite communications: Main-band circuits are used for satellite mode, which thus benefits from IF-DSP. Striking design: With its large amber LCD and backlit keys, the distinctive front panel of the TS-2000/2000X improves operating ease. Kenwood Skycommand System II Plus: Built-in Transporter f

5、unction means the TS-2000/2000X/ B2000 can be operated remotely with one handheld transceiver. High frequency stability: Built-in TCXO offers professional performance 0.5ppm* (-10+50C). *Main-band SSB, CW, FSK, AM modes only. High-speed processing: Superior performance is assured with two 16-bit DSP

6、 chips, double-precision computing and a 100MHz speed CPU, plus 24-bit A/D and D/A converters. Other features include a mobile controller and radio control software (both options), built-in auto antenna tuner, DX cluster tune, and an antenna terminal dedicated to HF low-band reception. Distinctive b

7、y Design, Packed for PerformanceDistinctive by Design, Packed for Performance Kenwoods new all-mode multibander breaks new ground in more ways than one. This TS-B2000 black box version offers the same functionality and performance as the TS-2000 minus the controls so you can carry it in the trunk of

8、 your car, or set up on the desk with your personal computer. TS-B2000 Cutting-edge Technology in a Streamlined Package Sleek front panel with power switch and mic/headphone terminals Optional RC-2000 mobile controller available for mobile use ARCP-2000 radio control software supplied for PC use * W

9、ith optional UT-20 1200MHz all-mode unit HF/50/144/440/1200*MHz All-mode Multibander Easy Mode A marvel of electronic engineering: Kenwoods stylish new all-mode multibander is packed with top-end features yet compact enough to use at home, in your car, or on a DXpedition. With its 3D front panel, fe

10、aturing backlit keys and large amber display, its appear- ance is as distinctive as its performance. * With optional UT-20 1200MHz all-mode unit HF/50/144/440/1200*MHzHF/50/144/440/1200MHz All-mode Multibander All-Mode, Multiband, Engineered for Excellence Kenwoods new TS-2000/2000X/B2000 all-mode m

11、ultibander may be compact, but its equipped with all the features you would expect to find in a top-of-the-line rig. IF Digital Signal Processing The TS-2000/2000X/B2000 is serious about digital signal processing. Kenwoods advanced digital technology converts analog waveforms into digital data in re

12、al-time, enabling such digital processing as IF filtering, slope tune, auto notch and AGC. IF-stage DSP on main-band transmit and receive including V/UHF bands allows the greatest range of control and unprecedented performance. DSP Detection IF-stage DSP means that the TS-2000/2000X/B2000 offers sig

13、nificantly lower distortion and higher quality detection in all modes. (FM: digital AF filter) Digital Filtering There is absolutely no need to purchase optional filters: digital IF filters are available for each mode (FM: digital AF filter), offering performance superior to anything possible with a

14、nalog circuitry. When operating in SSB/FM/AM modes, this digital filtering enables both high- and low-cut frequency variance. Employing slope tune, you can thus cut out noise with minimal effect on sound quality. In AM mode, the high-cut fre- quency can reduce inter- ference by controlling the IF pa

15、ss bandwidth useful for receiving short- wave broadcasts. In CW mode, the WIDTH func- tion is supplemented by center frequency shift, allowing adjacent signal interference to be tuned out. The WIDTH function also provides noise reduction capabilities in FSK with 4 steps avail- able: 250, 500, 1000 a

16、nd 1500Hz. And thanks to AF-stage DSP, independent control of high-cut and low-cut frequencies (12 steps each) provides slope tune capability in FM as well. IF Auto Notch Since it is working with a digital signal, IF Auto Notch (main band, SSB mode) can provide extremely sharp filtering of carrier f

17、requencies from broadcast and con- tinuous beat sources. The interfering beat is removed far more accurately than in conventional analog systems, and Auto Notch will even track changes in the beat signal (tracking speed can be varied in 5 steps). IF AGC The digital AGC circuit (main band only) deliv

18、ers very fast release characteristics, surpassing even the best analog designs. You can select a custom release time (20 steps) for each mode, except FM. WIDTH Desired signal (CW) Interfering signal (CW) Interfering signal (SSB) SHIFT Desired signal (CW) Interfering signal (SSB) Hi-cut slope tune Lo

19、-cut slope tune Desired signal (SSB) Interfering signal (CW) Interfering signal (SSB) SSB slope tune DSP notch filter Beat Conventional notch filter slope Target signal AF Digital Signal Processing DSP is also executed at the AF stage, offering Beat Cancel and CW Auto Tune functions. It also enables

20、 you to achieve remarkable noise reduction and apply custom enhancements to your transmitted voice. Beat Cancel Automatic Beat Cancel, avail- able for the main band (SSB and AM modes), immediately eliminates multiple beats interfering with a desired signal. It works well in combination with IF Auto-

21、Notch (SSB). Manual Beat Cancel A new Manual Beat Cancel function, which operates as a manual AF notch, can be used in all modes though it is particularly effective in CW. CW Auto Tune You no longer have to adjust the VFO while operating on CW CW Auto Tune does it for you automatically by adjusting

22、the VFO to your preset pitch at the touch of a button. Noise Reduction There are 2 types of noise reduction: LEM (NR1) and SPAC (NR2). LEM (Line Enhancer Method) available for all modes on the main band and FM/AM on the sub band automatically forms a filter shape around the target signal for a custo

23、m, dynamic noise reduction capability. The degree of enhancement can also be set manually for main- band use. The SPAC (Speech Processing/Auto Correlation) function utilizes a special sta- tistical/correlation algorithm to pull out weak signals that are buried deep in noise. Although available for a

24、ll modes on the main band, its especially useful for tough CW conditions. The correlation time setting can be adjusted in 10 steps between 2ms and 20ms. TX Audio Shaping You have 3 ways to tailor audio quality with DSP: the TX/RX equalizer (SSB/FM/AM), TX filter bandwidth (SSB/AM), and speech proces

25、sor (SSB/FM/AM). The TX/RX equalizer offers 4 frequency response settings on SSB, FM and AM: high boost for improved clarity, formant pass to minimize extraneous sounds, bass boost for stronger sound, and conventional mode for an analog sound. On SSB and AM transmit you can choose between 6 TX filte

26、r bandwidth settings according to your microphone and operating requirements. The speech processor works across three bands (SSB, FM and AM) for high compression and minimal distortion. 0 Frequency Hz 0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 80.0 -100 200 300 400 500-100-200-300-400-500 Attenuation dB

27、 Target signal Beat Beat Beat Canceled Signal NoiseNoise Formed filter Signal NoiseNoise Extract signal from the noise Line Enhancer Method SPAC Method HF Band 50MHz Band440MHz Band 144MHz Band1200MHz Band High-duty Transmitter Section This transceiver is the perfect choice for contesting, mobiling

28、and FSK applications, deliver- ing up to 100 (AM: 25) watts on HF/50/144MHz bands. Output is 50 (AM: 12.5) watts on the 440MHz band, and 10 (AM: 2.5) watts on 1200MHz*. But theres more than just power: the built-in TCXO ensures excellent frequency stability 0.5ppm (except in FM mode). *Minimum outpu

29、t is 5 watts for HF/50/144/440MHz bands, 1 watt for 1200MHz. CW Features In addition to the new Auto Tune function, there is a full range of CW features. The full/semi break-in switching and delay time settings are fully adjustable. In semi break-in the delay time between key release and active rece

30、ive mode can be set for between 50ms and 1000ms. When using VOX operation the delay time can be set for between 150ms and 3000ms. Other CW features include pitch control (400-1000Hz), side tone monitor with 10-step volume setting, DSP-based rise time adjustment, and CW reverse mode. FSK Features Whe

31、n operating in FSK mode, you can select shift frequen- cies (170, 200, 425 and 850Hz) and switch both KEY polarity and Hi/Low tones to suit your RTTY device. Additionally, the FSK reverse function lets you match transmission methods to the other party if necessary, for example changing the BFO frequ

32、ency from LSB (normal) to USB (reverse). FM Features As well as switchable Narrow/Wide deviation modes, the TS-2000/2000X/B2000 has built-in CTCSS functionality with 38 EIA-standard sub-tones settings plus 1750Hz tone burst. Other features include DCS (104 codes), both cross- band and fixed-band rep

33、eater operation, and 1200MHz ALT. Data Communication Features Packet filter bandwidth is fully selectable to match packet speed, and you can also switch ACC2 (PKD) input/output levels. For PSK31 mode, the menu offers a 100Hz band- width IF-DSP filter. Expanded Power and Performance DX Cluster (Packe

34、t Cluster) Tune DX cluster information received on the sub band is not just displayed on the LCD: it can also be used for instantly setting up the main band frequency to cluster information. Up to 10 items can be stored in memory. Built-in 1200/9600bps TNC The simple 2-chip TNC is compliant with the

35、 AX.25 protocol for Sky Command and DX cluster tune. Dual-Channel Watch Provision of main and sub bands enables dual-channel watch. This all-mode multibander can simultaneously receive two frequencies, even on the same band, allowing such combinations as HF+V/UHF, VHF+VHF, UHF+UHF and VHF+UHF (the s

36、ub band is used exclusively for 144/440MHz reception on FM/AM). This means, for instance, that you can pick up local information on V/UHF while operating HF on the main band. Satellite Communications Satellite operations are enhanced with the IF-DSP, 10 dedicat- ed memory channels, Doppler effect fr

37、equency adjustment (manual) and the ability to choose either normal or reverse shift for the trace. 020406080100120140160180 0.00 -0.20 -0.40 -0.60 -0.80 -1.00 0.20 0.40 0.60 0.80 1.00 Drift PPM Elapsed time min Reception setting: 14.200MHz Rating condition ANT terminals (HF, 50MHz) COM (D-SUB 9-pin

38、) terminal Ext. speaker terminals ACC2 terminal GroundPaddle terminalExt. AT terminal DC 13.8V ANT terminal (1200MHz) ANT terminal (HF RX) ANT terminals (144MHz, 440MHz) Ext. key terminal Ext. control terminal PANEL terminal for mobile controller REMOTE terminal All-mode Up link HF/50MHz 144MHz 440M

39、Hz 1200MHz HF/50MHz144MHz Down link 440MHz1200MHz You control the TS-2000/2000X/B2000 from the portable Commander (CMD). Voice is transmitted from the CMD unit on the 440MHz band. Control signals are also sent from the CMD unit on the 440MHz band. The HF signal received by the TS-2000/2000X/B2000 is

40、 relayed to the CMD unit on the 144MHz band. You can confirm the HF frequency on the LCD of the CMD. The TS-2000/2000X/B2000 is fully equipped for Kenwoods Skycommand System II Plus. With just a handheld transceiver you can relax in your garden while DXing from your shack. Alter- natively, you could

41、 enjoy HF access via the multibander in your parked car while taking in a baseball game. Conventionally two extra transceivers are required for KSS operation a Commander and a Transporter but the TS-2000/2000X/B2000 has Transporter functions built in. This means you can operate it remotely with a si

42、ngle mobile or handheld unit, such as the TH-D7A or TM-D700A, transmitting control signals to the Transporter, which also relays your voice to the HF radio. In return, HF signals are transmitted back to the Commander. This system allows you to transmit and receive HF signals, set fre- quencies (with

43、 LCD confirmation), switch memory channels, and much more all remotely. Kenwood Skycommand System II Plus Kenwood Skycommand System II Plus is the most sophisticated version yet devel- oped, enabling full-duplex operation with access to such HF functions as RIT/XIT, mode switching (USB, FM, etc.), s

44、plit- frequency operations on/off, and memory shift. Control is effected via simple TNC, compatible with the AX.25 protocol. In addition, if a second TS-2000/2000X/ B2000 unit is used as the Commander, you have control over noise reduction, noise blanker on/off and antenna switching among other func

45、tions. Other Features Large, amber-colored backlit LCD Backlit front keys Compatible with optional DRU-3A digital recording unit Key operation announcement with optional VS-3 voice synthesizer (option) Programmable function keys Transverter (displays up to 19.99999GHz) RF gain control All-mode squel

46、ch Simple visual scan Auto simplex checker Auto repeater offset (144/1200MHz) DTMF remote control Built-in keyer Noise blanker Auto power-off Enhanced Operating Ease Automatic Antenna Tuner The built-in antenna tuner which also operates when the radio is in receive mode covers amateur bands from 1.9

47、 to 50MHz, with rapid tuning lock when using presets. 300 Memory Channels This transceiver provides a bank of 300 memories (plus 1 call channel for each band), with 290 assignable by name and 10 available for programmable scan. The scroll func- tion lets you browse memory contents, memory channel co

48、py sends the contents of one channel to another, lock-out memory changes the scan map to exclude certain channels, and memory shift alters the frequency stored in a channel. In addition, there are 10 quick memories to capture a cur- rent operation on-the-fly ideal for contest operation. Multiple Sca

49、n Functions A full range of scan functions is provided, including MHz scan, memory scan, and call scan. Group scan mode covers all 300 memory channels in groups of 10, and programma- ble band scan will search a frequency spread between two VFO settings (the scan-hold function stops the scanning for 5 seconds). A new feature is programmable slow scan, which will automatically slow down to check a frequency range youre interested in. As well as varying scan speed, you can choose either time-operated (TO) or carrier-operat- ed (CO) busy-stop-resu