TS-990S_user.pdf

《TS-990S_user.pdf》由会员分享，可在线阅读，更多相关《TS-990S_user.pdf（286页珍藏版）》请在收音机爱好者资料库上搜索。

1、B62-2389-10 09 08 07 06 05 04 03 02 01 HF/50 MHz TRANSCEIVER TS-990S INSTRUCTION MANUAL 1.02 I PRIOR TO YOUR FIRST QSO Index Contents Thank you for purchasing this TS-990S transceiver. This chapter, Prior to your first QSO, gives you a product overview, conditions of your use, notations applied to t

2、his manual and safety precautions. Prior to your first QSO, carefully read through the following precautions to become familiar with the safety precautions applicable to this transceiver. After reading through this instruction manual, store it with the warranty card and packing materials. FEATURES A

3、 main receiver with a class-leading +40 dBm third-order IP and a sub receiver which incorporates the TS-590S receiver architecture. Capable of receiving two signals at once, in different bands. 7-inch wide and 3.5-inch color TFT displays can show independent contents. Covers the HF and 50 MHz bands.

4、 Clean 5 to 200 W transmit power through the 50 V FET final unit. High-speed relay-driven automatic antenna tuner built-in allows fast tuning. Built-in Baudot RTTY, PSK31, Demodulator and Modulator for PSK63. Compliant with SSB, CW, FSK, PSK (QPSK31, BPSK31, BPSK63), AM, and FM Modes. Three Analog D

5、evices 32-bit floating-point arithmetic DSPs. Equipped as standard with USB, Serial and LAN ports. Video signal output for display by an external PC (main screen display only). Various PC applications (free software): ARCP-990 enabling PC control, ARHP-990 enabling remote control, and ARUA-10 enabli

6、ng the USB audio interface. SUPPLIED ACCESSORIES The following accessories are supplied with the transceiver. After carefully unpacking the transceiver, identify the accessories listed in the table. DescriptionQuantity AC Power Cable UL plug (K-type only)1 BS plug (E-type only)1 CE plug (E-type only

7、)1 7-pin DIN plug1 13-pin DIN plug1 Fuse 4 A for an external antenna tuner1 Instruction Manual1 Warranty Card1 Circuit Diagram4 Line Filter (E-type only)1 MARKET CODES K-type: The Americas E-type: Europe The market code is shown on the carton box. The AC power cable supplied with the product is suit

8、able for AC 120V(K-type) or AC 220V-240V (E-type) Do not use a power cable other than supplied with this product. NOTICE TO THE USER One or more of the following statements may be applicable for this equipment. FCC WARNING This equipment generates or uses radio frequency energy. Changes or modificat

9、ions to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC T

10、his equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can generate

11、 radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to r

12、adio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipme

13、nttoanoutletonacircuitdifferentfromthatto which the receiver is connected. Consultthedealerfortechnicalassistance. Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries wi

14、th the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility ne

15、arest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. This device complies with Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions : (1) this device ma

16、y not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. NOTIFICATION This equipment complies with the essential requirements of Directive 1999/5/EC. The use of the warning symbol means the equipment is subje

17、ct to restrictions of use in certain countries. This equipment requires a license and is intended for use in the countries below. ATBEDKFIFRDEGRIS IEITLILUNLNOPTES SECHGBCYCZEEHULV LTMTPLSKSIBGRO ISO3166 This product is designed for connection to an IT power distribution system. PRIOR TO YOUR FIRST

18、QSO II Index Contents Burn26891saylResmiGazetedeyaymlananElektrikli veElektronikEyalardaBazZararlMaddelerinKullanmnn SnrlandrlmasnaDairYnetmelieuygunolarakretilmitir. This product complies with Directive, Number 26891 regarding “REGULATION ON THE RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCE

19、S IN ELECTRICAL AND ELECTRONIC EQUIPMENT”. PRECAUTIONS Please observe the following precautions to prevent fire, personal injury, and transceiver damage: Connectthetransceiveronlytoapowersourceasdescribed in this manual or as marked on the transceiver itself. Routeallpowercablessafely.Ensurethepower

20、cablescan neither be stepped upon nor pinched by items placed near or against the cables. Pay particular attention to locations near AC receptacles, AC outlet strips, and points of entry to the transceiver. Takecarenottodropobjectsorspillliquidintothe transceiver through enclosure openings. Metal ob

21、jects, such as hairpins or needles, inserted into the transceiver may contact voltages resulting in serious electrical shocks. Never permit children to insert any objects into the transceiver. Donotattempttodefeatmethodsusedforgroundingand electrical polarization in the transceiver, particularly inv

22、olving the power input cable. Adequatelygroundalloutdoorantennasforthistransceiver using approved methods. Grounding helps protect against voltage surges caused by lightning. It also reduces the chance of a build-up of static charge. EXAMPLE OF ANTENNA GROUNDING ANTENNA LEAD IN WIRE GROUND CLAMP ELE

23、CTRIC SERVICE EQUIPMENT ANTENNA DISCHARGE UNIT GROUNDING CONDUCTORS GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM Minimumrecommendeddistanceforanoutdoorantenna from power lines is one and one-half times the vertical height of the associated antenna support structure. This distance allows ad

24、equate clearance from the power lines if the support structure fails for any reason. Locatethetransceiversoasnottointerferewithits ventilation. Do not place books or other equipment on the transceiver that may impede the free movement of air. Allow a minimum of 10 cm (4 inches) between the rear of t

25、he transceiver and the wall or operating desk shelf. Donotusethetransceivernearwaterorsourcesofmoisture. For example, avoid use near a bathtub, sink, swimming pool, or in a damp basement or attic. Thepresenceofanunusualodororsmokeisoftenasign of trouble. Immediately turn the power OFF and remove the

26、 power cable. Contact a KENWOOD service station or your dealer for advice. Locatethetransceiverawayfromheatsourcessuchas a radiator, stove, amplifier or other devices that produce substantial amounts of heat. Donotusevolatilesolventssuchasalcohol,paintthinner, gasoline, or benzene to clean the cabin

27、et of the transceiver. Use only a clean cloth with warm water or a mild detergent. Disconnecttheinputpowercablefromthepowersource when the transceiver is not used for long periods of time. Removethetransceiversenclosureonlytocarryour accessory installations described in this manual or accessory manu

28、als. Follow the provided instructions carefully, to avoid electrical shocks. If unfamiliar with this type of work, seek assistance from an experienced individual, or have a professional technician do the task. Enlisttheservicesofqualifiedpersonnelinthefollowing cases: a) The power supply or plug is

29、damaged. b) Objects have fallen into or liquid has spilled into the transceiver. c) The transceiver has been exposed to rain. d) The transceiver is operating abnormally or performance has seriously degraded. e) The transceiver has been dropped or the enclosure damaged. Donottouchthepowerplugwhileyou

30、rhandsarewetto avoid risk of electric shock. Keepchildrenawayfromthetransceiver,toavoid unnecessary risk of harm to the child. DonotremovetheplugfromanACoutletbypullingtheAC cable. PlugtheACcableonlyintoagroundedACoutlet. Donotblockthetransceiverairvent.Donotcoverthe transceiver. To maintain good ve

31、ntilation, place the transceiver at least 10 cm (4 inches) away from the wall. PRIOR TO YOUR FIRST QSO III Index Contents TRANSPORTATION, INSTALLATION AND PACKING MATERIAL STORAGE This transceiver is precise and sensitive, and is heavy. Take care not to hurt yourself and damage the transceiver by dr

32、opping it. To protect the transceiver from damage, the transceiver must be transported and installed by two or more persons securely holding the transceiver. Store all packing materials for the transceiver for future use, such as when transporting the transceiver when moving or requesting after-sale

33、s service. To prevent it from being damaged during transportation, wrap the transceiver with the white protective cover in the same way as it wrapped the transceiver at the time of purchase, then the transceiver must be packed with its original packing materials and transported with the front panel

34、facing up as illustrated above. Do not transport the transceiver placed sideways. ABOUT THIS MANUAL This manual was written subject to the specifications and designs described below. Specifications are described in PRODUCT SPECIFICATIONS in chapter 19, MISCELLANEOUS. page 19-2 Firmware Version: 1.00

35、 (and later) You can verify the firmware version as described below. 1 Press the main power switch (I/O) located on the rear panel, to the I (ON) position to apply power to the transceiver. While the transceiver power () is turned OFF, the LED lights orange. While the transceiver power () is turned

36、ON, the LED lights green. M.IN 2 Hold down M.IN (Memory), then press . After startup,the Firmware Update screen appears, and the firmware version can be viewed. 3 Press to turn the transceiver power () OFF. Note: There are two M.IN keys on this transceiver; one is for Memory and the other for Quick

37、Memory. To view the firmware version, ensure to use M.IN (Memory). Refer to Chapter 4 Basic Operations for the details of the power sourcing. page 4-1 The latest firmware and its corresponding instruction manual, in PDF format, can be downloaded from the following URL: COPYRIGHTS FOR THIS MANUAL JVC

38、 KENWOOD Corporation shall own all copyrights and other intellectual properties for the product and the software and for all manuals and documents attached to the product and the software. A user is required to obtain approval from JVC KENWOOD corporation, in writing, prior to redistributing this do

39、cument on a personal web page or via packet communication. A user is prohibited from assigning, renting, leasing or reselling the document. JVC KENWOOD Corporation does not warrant that quality and functions described in this manual comply with each users purpose of use and, unless specifically desc

40、ribed in this manual, JVC KENWOOD Corporation shall be free from any responsibility for any defects and indemnities for any damages or losses. PRIOR TO YOUR FIRST QSO IV Index Contents SOFTWARE COPYRIGHTS The title to and ownership of copyrights for software, including but not limited to the firmwar

41、e that may be distributed individually, to be embedded in KENWOOD product memories, are reserved for JVC KENWOOD Corporation. Any modifying, reverse engineering, copying, reproducing or disclosing on an Internet website of the software is strictly prohibited. A user is required to obtain approval fr

42、om JVC KENWOOD corporation, in writing, prior to redistributing this manual on a personal web page or via packet communication. Furthermore, any reselling, assigning or transferring of the software is also strictly prohibited without embedding the software in KENWOOD product memories. SOFTWARE LICEN

43、SE AGREEMENT Software License Agreement contains the terms and conditions of use of the software embedded in or used with the transceiver. A user is entitled to use the software subject to the acceptance and agreement of this Software License Agreement by the user. Also, this Software License Agreem

44、ent stipulates the terms and conditions of use of this software embedded in or used with the transceiver, and a user has the right to use the transceiver with the software embedded subject to the applicable laws and regulations, the description and defined in this manual and the warranty card. The f

45、ollowing procedures allow you to display the Software License Agreement on the main screen. Refer to Menu for the details of configuration method in the Menu screen. page 3-1 F1F7 FADV.MENU MULTI/CH 1 Press ADV. (F) from the Menu screen to open the Advanced Menu screen. 2 Select Menu 28, Software Li

46、cense Agreement, from the Advanced Menu screen. 3 Press SELECT (F4) to display the Software License Agreement. 4 Press (F2) or (F3), or rotate the MULTI/CH control to scroll through the Software License Agreement. 5 Press MENU to end. IMPORTANT NOTICES CONCERNING THE SOFTWARE The software embedded i

47、n this transceiver consists of a multiple number of and individual software components. Title to and ownership of copyrights for each software component is reserved for JVC KENWOOD Corporation and the respective bona fide holder. This product employs the software component in accordance with the End

48、 User License Agreement (hereinafter referred to as the EULA) stipulated by JVC KENWOOD Corporation and/or the respective bona fide holder. There is free software stipulated and governed by the “EULA”, and this, a distribution condition of the software component in the executable format under the te

49、rms and conditions contained in the GNU General Public License or Lesser General Public License (hereinafter referred to as the “GPL/LGPL”), requires to make the source code for the relevant software components available. Access the URL below for details of the software component stipulated in the GPL/LPGL. The following procedures allow you to display Important Notices concerning Free Open Source Software on the main screen. 1 Press ADV. (F) from the Menu screen to open the Advanced Menu screen. 2 Select Menu 29, Important Notices concerning Free Open