Icom_IC-400Pro_broch.pdf

《Icom_IC-400Pro_broch.pdf》由会员分享，可在线阅读，更多相关《Icom_IC-400Pro_broch.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、80+ CHANNEL UHF TRANSCEIVER 128 Channel Capability The IC-400PRO comes pre-programmed with the 80 UHF CB simplex and repeater channels. Up to 35 additional channels are available for monitoring frequencies in the 450MHz500MHz band. Channel data entry is available through the front panel, or via opti

2、onal PC programming kit. Commercial Specifi cation Designed for the most extreme Australian conditions. Die-cast alu- minium chassis and heavy-duty heat sink, impact resistant polycarbonate front panel incorporating 4W speaker for crisp clear audio, even in high noise environments. Industrial grade

3、condenser microphone is supplied. Super Sensitive Private Channels The IC-400PRO is also compatible and fully approved for use on Licensed Land Mobile Services at 25W within the 450500MHz band* at 12.5 or 25kHz when re-confi gured by an Authorised Icom Radio Dealer. * ACMA Licensed Users only. Uniqu

4、e Repeater Scan Our unique repeater scan function fi nds available repeater stations even while you are travelling. In addition, Group/Priority scan de- tects tagged channels, while also monitoring your priority channel. Silent Stand-By Listen only to your own group ! Up to 51 user selectable CTCSS

5、group codes are available for silent stand-by operation. DTCS is also available with private channels. Selcall (Selective Calling) Hear only the calls intended for you and see who called with SelCall ! The IC-400PRO comes with all popular CB and commercial 5-Tone Sel- call formats, along with user s

6、electable ID number set up. The last 10 caller IDs are stored for easy recall and up to 28 numbers can be pre- programmed with name tags for easy reference. Easy-to-use and install Smart Ring and Automatic Transponder acknowledges if other Icom CB transceivers received your call or are within range.

7、 Touch pad controls and rotary volume dial Backlit LCD with 8 character alpha display and status icons Compact and light with front facing speaker and quality mounting kit for roof or console mounting Optional DIN size kit for in-dash installation Fully Featured with Class Leading Performance MADE I

8、N JAPAN Printed in Japan Count on us!URL: http:/www.icom.co.jp/world/index.html Your local distributor/dealer: 1-1-32, Kami-minami, Hirano-ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302Fax: +81 (06) 6793 0013 Unit 1 / 103 Garden Road, Clayton, VIC 3168, Australia Phone: +61 (03) 9549 7500 Fax:

9、+61 (03) 9549 7505 E-mail: .au URL: .au 06YS032C 20032011 Icom Inc. 80+ CHANNEL UHF TRANSCEIVER SPECIFICATIONS OPTIONS SUPPLIED ACCESSORIES Frequency coverage : CB channel476.425477.400MHz Private channel450500MHz Number of channels : CB channel80 channels (Bank 1) Private channel48 channels (Bank 2

10、8) Channel spacing: CB channel12.5kHz Private channel12.5/25kHz Frequency stability: 2.5ppm Operating temp. range: 10C to +60C Power supply voltage : 13.8V DC Current drain (approx.): Tx CB (5W)4.0A Private (25W)7.0A Rx Max. audio1200mA Stand-by300mA Antenna impedance: 50(SO-239) Weight: 800g Output

11、 power (at 13.8V DC): CB channel5, 1W (selectable) Private channel25, 5, 1W (selectable) Max. freq. deviation: 5.0/2.5kHz (wide/nar) Spurious emissions: 30dBm Adjacent Ch. power: 22/16dBm (wide/nar) FM Hum and Noise: 46/40dB typ. (wide/nar) Mic. impedance: 600(8-pin modular) Sensitivity : 0.25Vtyp.

12、at 12dB SINAD Squelch sensitivity: 0.25V typ. (threshold) Adjacent channel selectivity : 73/65dB (wide/nar) Spurious response: 75dB Intermodulation: 70dB Hum and Noise: 45/40dB typ. (wide/nar) Audio output power: 4Wtyp. at 10% distor- tion with a 4 load Ext. Speaker: 2-conductor 3.5 (d) connectormm

13、(18)/4 GENERAL Measurements made in accordance with AS4295-1995, AS/NZS 4365-1996 (40 Channel CB) Max. input power: 5W UT-108 DTMF DECODER UNIT Provides DTMF decode and ANI capabilities. UT-109 VOICE SCRAMBLER UNIT(Ver. 02) Up to 32 non-rolling scrambling codes avail- able. UT-110 VOICE SCRAMBLER UN

14、IT(Ver. 02) Up to 1020 (255 codes 4 groups)rolling scrambling codes are available. 40mm 150mm 117.5mm 141.8mm DIMENSIONS Applicable U.S. Military Specifi cations Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards. SM-2

15、5SP-22UT-108OPC-617 q Hand microphone (HM-152) w DC power cable e Microphone hanger kit r Mounting bracket kit t Key assign stickers HM-152T Standard MIL 810 F MethodProcedure Low Pressure500.4I, II High Temperature501.4I, II Low Temperature502.4I, II Temperature Shock503.4I Solar Radiation505.4I Ra

16、in506.4I, III Humidity507.4 Salt Fog509.4 Dust510.4I Vibration514.5I Shock516.5I, IV Also meets equivalent MIL-STD-810-C, -D and -E. Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia, Australia and/or other countries. All other trademarks are the properties of their respective holders.