Codan_9323_quick_user.pdf

《Codan_9323_quick_user.pdf》由会员分享，可在线阅读，更多相关《Codan_9323_quick_user.pdf（215页珍藏版）》请在收音机爱好者资料库上搜索。

1、No part of this handbook may be reproduced, transcribed, translated into any language or transmitted in any form whatsoever without the prior written consent of Codan Pty Ltd. Copyright 1997 Codan Pty Ltd. Codan part number 15-04076 Issue 1, 1997 No part of this handbook may be reproduced, transcrib

2、ed, translated into any language or transmitted in any form whatsoever without the prior written consent of Codan Pty Ltd. Copyright 1997 Codan Pty Ltd. Codan part number 15-04076 Issue 1, 1997 HF SSB transceiver reference manuali Contents 1 About this manual 2 Installation Type of station.2-2 Mount

3、ing the transceiver .2-5 Mounting the control head and loudspeaker.2-8 Power supply.2-11 Grounding . 2-12 Ancillary equipment . 2-13 3 Channel and scan table setup Channel creation and editing .3-2 Channel creation in Free-Tune Receiver mode. 3-17 Channel deletion.3-21 Scan table creation.3-22 Scan

4、table deletion.3-27 Telephone directory creation.3-29 4 Using Setup mode procedures Using Setup mode.4-2 List of Setup mode procedures.4-3 Advanced users.4-7 5 Setup procedurespart 1 ALE alphanumeric address setup.5-2 ALE option reset.5-4 HF SSB transceiver reference manuali Contents 1 About this ma

5、nual 2 Installation Type of station.2-2 Mounting the transceiver .2-5 Mounting the control head and loudspeaker.2-8 Power supply.2-11 Grounding . 2-12 Ancillary equipment . 2-13 3 Channel and scan table setup Channel creation and editing .3-2 Channel creation in Free-Tune Receiver mode. 3-17 Channel

6、 deletion.3-21 Scan table creation.3-22 Scan table deletion.3-27 Telephone directory creation.3-29 4 Using Setup mode procedures Using Setup mode.4-2 List of Setup mode procedures.4-3 Advanced users.4-7 5 Setup procedurespart 1 ALE alphanumeric address setup.5-2 ALE option reset.5-4 Contents iiHF SS

7、B transceiver reference manual ALE option settings.5-6 ALE sounding interval.5-13 Beep loudness.5-15 Call preamble length. 5-17 Call privacy on/off.5-19 Clock calibration.5-21 Clock setting.5-23 Clone a transceiver .5-28 6 Setup procedurespart 2 Display brightness.6-2 Display contrast.6-4 Display di

8、agnostics on/off.6-6 Display frequency .6-8 Emergency selcall receive setup.6-11 Emergency selcall transmit setup. 6-15 Free-Tune Receiver mode availability on/off .6-19 GPS display on/off.6-21 GPS timeout on/off .6-23 7 Setup procedurespart 3 Page call canned message setup .7-2 Password entry to en

9、able transceiver options.7-5 Power up message on/off.7-10 Power up mute setting.7-13 Power up address display on/off.7-16 PTT release beep on/off.7-18 PTT transmit cutout. 7-20 Recall channels by frequency on/off .7-22 RF gain on/off.7-24 RS-232 connected equipment.7-26 RS-232 connection baud rate.7

10、-29 Contents iiHF SSB transceiver reference manual ALE option settings.5-6 ALE sounding interval.5-13 Beep loudness.5-15 Call preamble length. 5-17 Call privacy on/off.5-19 Clock calibration.5-21 Clock setting.5-23 Clone a transceiver .5-28 6 Setup procedurespart 2 Display brightness.6-2 Display con

11、trast.6-4 Display diagnostics on/off.6-6 Display frequency .6-8 Emergency selcall receive setup.6-11 Emergency selcall transmit setup. 6-15 Free-Tune Receiver mode availability on/off .6-19 GPS display on/off.6-21 GPS timeout on/off .6-23 7 Setup procedurespart 3 Page call canned message setup .7-2

12、Password entry to enable transceiver options.7-5 Power up message on/off.7-10 Power up mute setting.7-13 Power up address display on/off.7-16 PTT release beep on/off.7-18 PTT transmit cutout. 7-20 Recall channels by frequency on/off .7-22 RF gain on/off.7-24 RS-232 connected equipment.7-26 RS-232 co

13、nnection baud rate.7-29 Contents HF SSB transceiver reference manualiii 8 Setup procedurespart 4 Scan table automatic scanning start.8-2 Scan table editing on/off .8-4 Selcall address setup .8-6 Selcall address size compatibility.8-13 Selcall lockout on/off .8-16 Selcall mute availability on/off.8-1

14、8 Status call availability on/off.8-20 Telcall availability on/off .8-22 Tone call setup.8-24 99-beacon call response on/off .8-27 9 Link Setup mode Link Setup mode enter/exit.9-2 Antenna band or channel control .9-5 PIN setup.9-8 Setup mode availability on/off.9-11 Transceiver reset to factory sett

15、ings.9-13 10 Display messages 11 Appendix Connectors.11-2 Connecting ancillary equipment. 11-8 Using the optional RS-232/I2C Interface . 11-10 Specifications. 11-14 Accessories. 11-15 Index Contents HF SSB transceiver reference manualiii 8 Setup procedurespart 4 Scan table automatic scanning start.8

16、-2 Scan table editing on/off .8-4 Selcall address setup .8-6 Selcall address size compatibility.8-13 Selcall lockout on/off .8-16 Selcall mute availability on/off.8-18 Status call availability on/off.8-20 Telcall availability on/off .8-22 Tone call setup.8-24 99-beacon call response on/off .8-27 9 L

17、ink Setup mode Link Setup mode enter/exit.9-2 Antenna band or channel control .9-5 PIN setup.9-8 Setup mode availability on/off.9-11 Transceiver reset to factory settings.9-13 10 Display messages 11 Appendix Connectors.11-2 Connecting ancillary equipment. 11-8 Using the optional RS-232/I2C Interface

18、 . 11-10 Specifications. 11-14 Accessories. 11-15 Index Contents ivHF SSB transceiver reference manual Figures Figure 2.1A typical fixed base station.2-2 Figure 2.2A typical mobile station.2-3 Figure 2.3Rear view of control head without cover.2-8 Figure 4.1The Setup mode tree.4-9 Figure 9.1Moving th

19、e link for Link Setup mode.9-2 Contents ivHF SSB transceiver reference manual Figures Figure 2.1A typical fixed base station.2-2 Figure 2.2A typical mobile station.2-3 Figure 2.3Rear view of control head without cover.2-8 Figure 4.1The Setup mode tree.4-9 Figure 9.1Moving the link for Link Setup mod

20、e.9-2 HF SSB transceiver reference manual1-1 1 About this manual This manual describes how you set up your Codan HF SSB transceiver. This issue of the manual incorporates operating information for software versions from: transceiver (main) 4.00 head (control) panel 4.00. You should refer to this man

21、ual when you want to: set up the transceiver for the first time change how the transceiver operates use options or ancillary equipment with the transceiver. HF SSB transceiver reference manual1-1 1 About this manual This manual describes how you set up your Codan HF SSB transceiver. This issue of th

22、e manual incorporates operating information for software versions from: transceiver (main) 4.00 head (control) panel 4.00. You should refer to this manual when you want to: set up the transceiver for the first time change how the transceiver operates use options or ancillary equipment with the trans

23、ceiver. About this manual 1-2HF SSB transceiver reference manual The manual contains 11 chapters. Chapter 1 explains how to use the manual. Chapter 2 explains how to install your transceiver and connect the components that make up your station. Chapter 3 explains how to set up channels, scan tables

24、and the telephone directory. Chapter 4 explains how to use Setup mode. You should read this before following any Setup mode procedure described in Chapters 58. Chapters 58 contain the Setup mode procedures that have been separated into four parts for ease of reference. Chapter 9 contains Link Setup

25、mode procedures. Chapter 10 lists all information and error messages output to the transceiver display. Chapter 11 covers technical information such as the connector pin arrangements, ancillary equipment settings, transceiver specifications, options and accessories. We recommend that only Codan appr

26、oved service agents perform maintenance on the transceiver. About this manual 1-2HF SSB transceiver reference manual The manual contains 11 chapters. Chapter 1 explains how to use the manual. Chapter 2 explains how to install your transceiver and connect the components that make up your station. Chapter 3 explains how to set up channels, scan tables and the telephone directory. Chapter 4 explains how to use Setup mode. You should read this before following any Setup mode procedure described in Chapters 58. Chapters 58 contain the Setup mode procedures that have been separate