Sunair_RT-9000A_RT-9000B_broch.pdf

《Sunair_RT-9000A_RT-9000B_broch.pdf》由会员分享，可在线阅读，更多相关《Sunair_RT-9000A_RT-9000B_broch.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、 RT-9000B/RT-9000A Digital HF/SSB Transceiver Product Information Sheet DIRECT DIGITAL SYNTHESIZER, 10 MS LOCK COMPREHENSIVE BITE SELECTABLE AGC HIGH SPEED DATA CAPABILITY REMOTE OR COMPUTER CONTROL TADIL-A/LINK 11 SSB CAPABILITY INTERNAL FED STD 1045 ALE OPTION AC POWER SUPPLY WITH AUTOMATIC KEYPAD

2、 ENTRY FOR 128 CHANNELS, CHANGEOVER TO 28 VDC MODE, AGC, POWER LEVEL, ETC. LF/MF/HF/RECEIVER SCANNING TWO SELECTABLE 600 OHM AUDIO PORTS PRE/POST SELECTOR PORTS The RT-9000B/RT-9000A Digital HF/SSB Transceiver combines powerful microprocessors and robust analog circuitry in a ruggedized package to m

3、eet the demands of todays HF data and voice networks. Its conservatively rated solid state RF power amplifier delivers 65 or 125 Watts PEP and Average power with a 100% duty cycle. The receiver utilizes a dual conversion technique employing a low-noise wide dynamic range front end. Modes of operatio

4、n include USB, LSB, AME, CW, and Data (with external modems). With the internal ALE modem, optional in the RT-9000A, the RT-9000B/RT-9000A provides Automatic Link Establishment per the interoperability requirements of MIL-STD-188-141A and Federal Standard 1045. The internal ALE modem eliminates the

5、need for external controllers and PC workstations. Data operating modes such as MIL-STD-203-1A TADIL-A/Link 11 (SSB operation per Paragraph 5.3.2) and MIL-STD-188-110A/B are accommodated using special delay compensated IF filters and other customized features that are standard in the RT-9000B and op

6、tional in the RT-9000A. The RT-9000B is a factory configured version of the RT-9000A that includes the necessary options for ALE and high speed data operation. A widescreen LCD presents the current operating status such as frequency, channel, mode, BFO, AGC, power, local or remote control. A bar gra

7、ph meter selectively indicates S-meter, forward and reverse RF power and 600 ohm transmit and receive audio levels. A softkey menu LCD below the main display permits the operator to select a variety of features such as meter, speaker control, plus any custom features. The RT-9000B/RT-9000A incorpora

8、tes an improved comprehensive built-in-test (BITE) capability to the Lowest Replaceable Unit (LRU) sub assembly. Rear panel connections allow direct interfaces of the F-9800 Pre/Post Selector to overcome effects of co-location interference. The power supply is of linear design reducing the undesirab

9、le effects of RFI and EMC. It accommodates both AC and 28 VDC (12 VDC with the PS-9010 converter) inputs via separate connectors and automatic changeover if the AC power fails. 3005 SW Third Avenue Fort Lauderdale, FL 33315-3312 U.S.A. Telephone: (954) 525-1505 Fax: (954) 765-1322 Email: URL SAE04AU

10、G03 RT-9000B/RT-9000A Digital HF/SSB Transceiver Product Specifications RT-9000A Sunair P/N: 8112001294 NSN: 5820-01-334-1218 RT-9000B Sunair P/N: 8128001281 NSN: Not Assigned GENERAL FREQUENCY RANGE: TX: 1.6 to 29.99999 MHz RX: 100 kHz to 29.99999 MHz PROGRAMMABLE CHANNELS: 128 Simplex or half-dupl

11、ex FREQUENCY STABILITY: 1 x 10-6 (Optional oven 1 x 10-8) MODES OF OPERATION: USB, LSB, AM, CW, and DATA (with external modems) MEMORY RETENTION: Non-volatile SCAN: Manual or Automatic BFO: 1.99 kHz, 10 Hz resolution SYNTHESIZER LOCK: 10 ms T/R SWITCHING TIME: 10 ms REMOTE INTERFACE: RS-232/422 (FSK

12、 Tone optional) RF INPUT/OUTPUT IMPEDANCE: 50 ohms nominal, unbalanced. BITE: Fault isolated to module level (LRU), descriptive readout on front panel and individual module indication. INPUT POWER: DC:26VDC15% AC: 115/230 VAC 15%,47-400Hz AC/DC Auto changeover DIMENSIONS: INCHES (CM): 5.96 H (15.2)

13、x 17.83W (45.4) x 17.66L, (44.9) WEIGHT LBS (KG): 49 (22.3) CONSTRUCTION: Modular plug-in assemblies. ENVIRONMENTAL TEMPERATURE: -300C to +500C HUMIDITY: 100% at 500C RAIN: MIL-STD-810F, Method 506.4 SHOCK: MIL-STD-810F, Method 516.5 Procedure 1 VIBRATION: MIL-STD-810F, Method 514.5 MTBF/MTTR: 6,500

14、h/15min RECEIVER SELECTIVITY: SSB: RT-9000B 300-3300 Hz 6dB SSB: RT-9000A 300-3000 Hz 6dB CW: 500 Hz 3dB, centered at 1 kHz AM: 3000 Hz 6dB SENSITIVITY: SSB: 0.5uV for 10dB (S+N)/N AM: 3.0uV for 10dB (S+N)/N CW: 0.3uV for 10dB (S+N)/N AUDIO OUTPUT: 5 watts into internal speaker5% THD Two selectable

15、lines at -20dBm to 10dBm into 600 ohms Headset low impedance IMAGE & IF REJECTION: 80 dB minimum SPURIOUS REJECTION: 80 dB minimum AGC ATTACK TIME: 10 ms nominal AGC RELEASE TIME: Fast - 30 ms nominal Medium - 200100 ms Slow - 31 sec SQUELCH: Syllabic ANTENNA INPUT PROTECTION: 100 VRMS, self-resetti

16、ng INTERNAL GENERATED SPURIOUS: 99.5% of the available frequencies from 100 kHz to 30 MHz at or below 0.5 V equivalent input at the antenna terminal. TRANSMITTER OUTPUT POWER: NORMAL: SSB: 125 Watts PEP and Average CW: 125 Watts AME: 40 Watts carrier LOW: SSB: 65 Watts (adj) CW: 65 Watts (adj) HARMO

17、NIC SUPPRESSION: -45 dB second order, -55 dB third and higher order. When the CU-9125 coupler is used in a 125 Watt system with a proper antenna configuration, the measured suppression of the second and third order harmonics is greater than 60 dB. When the CU-9150 coupler is used in a 1 kW system wi

18、th a proper antenna configuration, the measured suppression is greater than 70 dB. INTERMODULATION DISTORTION: 36 dB below PEP CARRIER SUPPRESSION: 50 dB below PEP UNDESIRED SIDEBAND: 50 dB below PEP 1 kHz HUM & NOISE LEVEL: 50 dB below PEP VSWR: Operates at VSWR 2.0:1 (Automatic power reduction abo

19、ve 2.0:1) AUDIO INPUT Microphone, two selectable 600 Ohm lines AUTOMATIC LEVEL CONTROL: 125 Watts 1 dB AUDIO COMPRESSION: 10 dB nominal (Internal Disable) INTERNAL OPTIONS RT-9000A: INTERNAL ALE: MIL-STD-188-141A/FED-STD-1045 Interoperable Automatic Link Establishment Processor REMOTE CONTROL: 300 b

20、ps FSK Modem Card SPECIAL FILTERS: DATA, CW, FSK to specification RT-9000B/RT-9000A: HIGH STABILITY: Oven Controlled Oscillator 1 x 10-8 PERIPHERAL EQUIPMENT PRE/POST SELECTOR: F-9800 1 KW/500W POWER AMPLIFIER: LPA-9600/LPA-9500 ANTENNA COUPLERS: 1kW/CU-9150 or 125W/CU-9125/CU-2430 REMOTE CONTROL: PATHFINDER II or RCU-9310 Control Unit DC CONVERTER: PS-9010 12VDC to 28VDC Converter Specifications subject to change without notice.