Maxon_49-HX_user.pdf

《Maxon_49-HX_user.pdf》由会员分享，可在线阅读，更多相关《Maxon_49-HX_user.pdf（51页珍藏版）》请在收音机爱好者资料库上搜索。

1、49-HX HANDS-FREE COMMUNICATOR Owners Manual English / Spanish / French TABLE OF CONTENTS Specifications1 Product Description2 Package Contents3 Performance Features4 Controls and Functions5 Operating Instructions8 Using the Intercom Mode10 Helmet Installation Instructions11 Installing the Remote P-T

2、-T13 Warranty Service Instructions14 Warranty Statement15 Optional/Replacement Accessories17 Other Maxon Products17 TABLA DE CONTENIDO Especificaciones18 Descripcin del Producto19 Contenido del Paquete20 Caractersticas de Funcionamiento21 Controles y Funciones5 Instrucciones de Operacin22 Utilizacin

3、 del Modo Intercom25 Instrucciones de Instalacin en un Casco26 Instalacin del P-T-T (Presione para Hablar) Remoto28 Instrucciones para el Servicio de Garanta29 Garanta30 Accesorios Opcionales y de Repuesto32 Otros Productos de Maxon32 TABLE DES MATIRES Fiche Technique33 Description du Produit34 Cont

4、enu35 Caractristiques36 Commandes et Fonctions5 Mode dEmploi37 Utilisation du mode Intercom39 Installation sur un Casque Protecteur40 Installation de la Touche dmission Distance42 Instructions pour Rparations43 Dclaration de Garantie44 Accessoires Optionnels/de Remplacement46 Autres Produits Maxon46

5、 49-HX SPECIFICATIONS GENERAL Channels:5 Frequency range:A:49.830 MHz, B:49.845 MHz, C:49.860 MHz, D:49.875 MHz E:49.890 MHz Power source:3 AA alkaline or ni-cad batteries Dimensions: W x H x D5-1/2 x 3 x 1 Weight:6.5 oz. RECEIVER Receiving system:FM Dual conversion superheterodyne Intermediate freq

6、uency: 1st IF: 10.7 MHz, 2nd IF: 455 kHz TRANSMITTER Transmitting system:Manual push-to-talk or VOX RF Output power:10,000 V/M 3 meters (FCC maximum) Modulation:FM (Frequency Modulation) Specifications subject to change without notice. 1 PRODUCT DESCRIPTION Maxons 49-HX hands-free communicator is a

7、compact, 5-channel portable two-way transceiver with a built-in intercom function. The radio has a uniquely designed headset that can be quickly and easily mounted onto a variety of open and closed-faced helmets, or worn as a standard headset. Communications between the 49-HX and other 49 MHz models

8、 is possible - provided each is equipped with the same channel/ frequency. Maxons 49-HX provides you the choice of hands- free automatic transmitting or manual push-to-talk operation. With the use of an optional 49-HXH passenger headset, two-way intercom communica- tions can occur between driver and

9、 passenger. The 49-HX provides hundreds of uses - in recreational (motorcycling, biking, boating, camping, hunting), and business situations (ware- housing, building maintenance, inventory control, security, etc.). Please take a few minutes to become familiar with the features and operating instruct

10、ions of your Maxon 49-HX hands-free communicator. 2 PACKAGE CONTENTS The Maxon 49-HX comes complete with belt clip, helmet adaptable headset with adjustable boom mic and whip antenna, hook and loop fastening material and Owners Manual. NOTE: Three AA alkaline or ni-cad batteries are required for ope

11、ration - batteries are not included. 3 PERFORMANCE FEATURES Five channel operation Approx. 1/4 mile range Helmet adaptable headset with boom microphone and whip antenna Powered by 3 AA alkaline or ni-cad batteries (not included) Choice of voice operated (VOX) or push-to-talk (P-T-T) operation Thumbw

12、heel on/off-volume control VOX Sensitivity control Battery low LED Jack for in-unit charging of ni-cad batteries, remote P-T-T and optional passenger headset 4 CONTROLS AND FUNCTIONS CONTROLES Y FUNCIONES COMMANDES ET FONCTIONS A.Power on/off-volume control - Turns power on/off and adjusts volume le

13、vel Control de encendido/apagado y volumen - Enciende/apaga y ajusta el nivel de volumen Interrupteur et commande du volume - Allume/teint lappareil et permet de rgler le volume B.Battery low LED - Lights to indicate when battery power is low Indicador LED de bateras con carga baja - Se enciende par

14、a indicar cuando la carga de las bateras est en un nivel bajo Voyant de niveau faible de la pile - Sallume lorsque le niveau de la pile est faible C.Push-to-talk button - Push and hold to transmit (talk); release to receive (listen) Botn presione para hablar - Mantngalo oprimido para transmitir (hab

15、lar); sultelo para recibir (escuchar) Touche dmission - Gardez enfonce pour mettre (parler); relchez pour recevoir (couter) D.Belt clip Sujetador para el cinturn Pince pour ceinture E.Jack for remote P-T-T switch Enchufe para el interruptor remoto (P-T-T) (Presione para Hablar) Prise pour touche dmi

16、ssion distance F.Jack for intercom passenger headset Enchufe para el conjunto de audfonos/micrfono de intercomunicacin del pasajero Prise pour casque du passager G.Fully adjustable and helmet adaptable headset Conjunto de audfonos/micrfono completamente ajustable y adaptable a un casco Casque de com

17、munication entirement rglable compatible avec un casque protecteur 5 6 M L A B C D E F G H J I K H.Adjustable microphone with windscreen Micrfono ajustable con pantalla contra el viento Microphone rglable avec boule antivent I.Intercom/TX mode selector - Selects either unit to unit communications or

18、 intercom communciations between main headset and passenger headset Selector de modo Intercom/ TX - Selecciona la unidad a la funcin de comunicaciones de la unidad o a la de comunicaciones intercom entre el conjunto de audfonos/micrfono principal y el del pasajero Slecteur mode Intercom/TX - Rglez c

19、e slecteur TX pour communiquer avec dautres appareils ou Intercom pour communiquer avec le passager seulement J.VOX/P-T-T Control dial - Thumbwheel selects mode of operation (voice or manual push-to-talk) and controls microphone sensitivity during voice activated transmissions Disco de control VOX/P

20、-T-T - Con una ruedecilla para mover con el pulgar se selecciona el modo de operacin (activado por voz o manual - presione para hablar) y se controla la sensibilidad del micrfono durante transmisiones activadas por la voz Slecteur activation par la voix/ activation manuelle - Utilisez la molette pou

21、r choisir le mode dactivation et la sensibilit du microphone (activation par la voix) K.Channel selector switch Interruptor selector de canales Slecteur de canaux L.Whip antenna - Receives and transmits radio signals Antena flexible - Recibe y transmite seales de radio Antenne fouet - reoit et met l

22、es signaux radio M.Remote P-T-T - Used to activate the P-T-T button without reaching for the main unit switch Interruptor remoto P-T-T (Presione Para Hablar) - Utilizado para activar el botn P-T-T sin tener que alcanzer el botn de la unidad principal Cadran dmission distance - Est utilis pour active

23、r la touche dmission sans avoir lappareil porte de la main 7 Charging jack - Used to charge ni-cad batteries inside the unit - requires Maxon DV-7510 AC/DC wall charger (not shown) Enchfe para cargar - Utilizado para cargar las bateras de nquel-cadmio dentro de la unidad - requiere un cargador de Ma

24、xon DV-7510 AC/DC de pared (no se muestra) Prise de chargement - est utilise pour charger les piles dans lappareil - requiert le chargeur au mur c.a./c.c. Maxon DV-7510 (non montr) OPERATING INSTRUCTIONS 1)Remove the battery compartment door by pulling the door tab towards you. Install three fresh A

25、A batteries, noting the polarity diagram embossed in the battery compartment. For continuous, heavy-duty use, alkaline batteries are recommended. NOTE: Rechargeable ni-cad batteries can be used in the 49-HX. To recharge them while installed in the unit, Maxons DV-7510 optional AC/DC wall charger mus

26、t be used. Average charging time is 12-16 hours. CAUTION: Do not attempt to recharge alkaline or carbon zinc batteries - this could result in an explosion, or other damage to the unit. 8 2)Using the belt clip, affix the unit to your belt or another convenient location. Put the headset on, extend the

27、 antenna and adjust to a comfortable fit. Keep the microphone ele- ment within 1 of your mouth. NOTE: If you choose to adapt the 49-HX headset for helmet use, refer to the helmet installation instructions in this manual. 3)Turn the power on and adjust the volume to a desired listening level. 4)Selec

28、t the desired channel using the channel selector switch. 5)If you want to communicate radio to radio, set the intercom/TX switch to TX. If you choose to utilize the Maxon 49-HXH passenger headset (sold separately), plug in the passenger headset and set the intercom/TX switch to the intercom position

29、. 6)Position the VOX/P-T-T thumbwheel control to either the VOX position (for hands-free, voice activated transmissions) or the P-T-T position (for manual push-to-talk transmissions). When using the VOX mode, adjust the sensitivity setting to suit your surroundings and needs. While looking at the 9

30、front of the unit, move the thumbwheel clockwise for a high setting, or counter-clockwise to a low setting. A low setting requires you to speak more loudly to activate the transmitter and should be used when background noise levels are high. A higher setting allows you to speak in a softer voice and

31、 should be used when lower background noise is present. NOTE: Very high noise levels may cause the unit to transmit continuously in the VOX mode. When very high background noise levels are present, the P-T-T mode may be the only method to avoid this problem. The Maxon 49-HX will not receive a transm

32、ission while you are transmitting. Wait until an incoming message is completed before transmitting. If the unit appears to malfunction, or has constant static present, try replacing the batteries, even if the “BATT LOW” LED has not illuminated. USING THE INTERCOM MODE 1)When using the units intercom

33、, follow steps 1 3 in the operating instructions. 10 2)Set the intercom/TX switch to the intercom position. 3)Plug in the optional Maxon 49-HXH passen- ger headset (sold separately) into the headset jack on the top of the unit. 4)Position the VOX/P-T-T thumbwheel control as directed in operating ins

34、tructions. NOTE: The 49-HXH passenger headset will only communicate with the main unit headset. However it can monitor all other unit to unit conversations, but will not transmit. (FCC Regula- tions). HELMET INSTALLATION INSTRUCTIONS Both the headband and earpiece of the 49-HX headset can be detache

35、d from the antenna/boom microphone assembly. Hook-and-loop fastening material is included with your 49-HX to enable attaching the antenna/boom microphone assembly to the exterior of the helmet and for attaching the earpiece to the interior. 11 To remove the headband: Release the whip antenna from th

36、e retaining hook. Hold down the headband release tab (A) and gently slide the headband out of the antenna/earpiece housing assembly. (Figure 1) To remove the earpiece: Gently pull the earpiece away from the antenna housing assembly. (Figure 2). Peel the adhesive backing from the 2x 4 piece of hook-a

37、nd-loop fastening material. Apply the material to the outside surface of the helmet, positioning it to allow the antenna to be in a vertical position and the boom microphone to be about 1 from your mouth when wearing the helmet. 12 (A) Mount the earpiece inside the helmet, positioning it so that it

38、will be next to your ear when wearing the helmet. A 2 x 2 piece of hook-and-loop fastening material is supplied for this mounting. NOTE: Some helmets have recesses for inserting an earpiece, or have pads which can be removed to provide space to mount the earpiece. INSTALLING THE REMOTE P-T-T The rad

39、ios remote push-to-talk button has been designed to fit the handlebar of a motorcycle, bicycle, snowmobile, etc. A mounting strap with hook-and-loop fastening material has been provided with your 49-HX. To use the remote P-T-T: Plug into the REM jack on your transceiver and set the VOX/P-T-T control

40、 dial to the P-T-T position (counter- clockwise, as far as it will go). 13 WARRANTY SERVICE INSTRUCTIONS 1)Refer to the Operating Instructions section of this Owners Manual for adjustments that may be applicable to correct your problem. 2)If the above mentioned procedure does not correct the problem

41、 you are experiencing with your unit, return the unit (with proof of purchase) to the place of purchase, or call Maxons Customer Service Department for assistance. Maxon America, Inc. Customer Service Department 10828 NW Air World Drive Kansas City, Missouri 64153 816/891-1093, ext. 499 14 LIMITED W

42、ARRANTY STATEMENT The Consumer Products Division of Maxon America, Inc. (hereinafter referred to as “Maxon”), warrants that its Products and their included accessories will be free from defects in workmanship or materials under normal use for a period of ninety (90) days from date of purchase by the

43、 original end user, provided that the buyer has complied with the requirements stated herein. If the Product fails to function under normal use because of manufacturing defect(s) or workmanship during the ninety (90) day period following the date of purchase, it will be replaced or repaired at Maxon

44、s option at no charge when returned to the place of purchase. The defective unit must be accompanied by proof of the date of purchase in the form of a sales receipt. Maxons sole obligation hereunder shall be to repair or replace the Product covered in this Warranty. Replace- ment, at Maxons option,

45、may include a similar or higher-featured product. Repair may include the replacement of parts or boards with functionally equivalent reconditioned or new parts or boards. Replaced parts, accessories, batteries or boards are warranted for the balance of the original time period. All replaced parts, a

46、ccessories, batteries or boards become the property of Maxon America, Inc. 15 Maxon shall have no obligation to make repairs or to cause replacement required through normal wear and tear or necessitated in whole or in part by catastrophe, fault or negligence of the user, improper or unautho- rized a

47、lterations or repairs to the Product, use of the Product in a manner for which it was not designed, or by causes external to the Product. This warranty is void if the serial number is altered, defaced or removed. The purchaser shall provide for removal of the defective Product and installation of it

48、s replacement. THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED, OR STATUTORY, INCLUD- ING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FOR ANY PRODUCT THAT DOES NOT COMPLY WITH THE WARRANTY SPECIFIE

49、D, THE SOLE REMEDY WILL BE REPAIR OR REPLACEMENT. IN NO EVENT WILL MAXON AMERICA, INC. BE LIABLE TO THE BUYER FOR ANY DAMAGES, INCLUDING ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUEN- TIAL DAMAGES, OR THE LOSS OF USE OF, OR THE INABILITY TO USE THE PRODUCT. This warranty is void for sales and deliveries outside of the U.S.A. 16 OPTIONAL / REPLACEMENT MAXON ACCESSORIES DV-7510In-unit ni-cad battery charger 49-HXHOptional intercom passenger headset Rely on Maxon for quality, value-priced consumer electronics