Sony_XR-CA620X_user.pdf

《Sony_XR-CA620X_user.pdf》由会员分享，可在线阅读，更多相关《Sony_XR-CA620X_user.pdf（84页珍藏版）》请在收音机爱好者资料库上搜索。

1、Operating Instructions Manual de instrucciones ? GB ES CT XR-CA620X For installation and connections, see the supplied installation/connections manual. Para obtener informacin sobre la instalacin y las conexiones, consulte el manual de instalacin/conexiones suministrado. ? ? ? ? ? 2001 Sony Corporat

2、ion 3-227-098-32 (1) FM/MW/SW Cassette Car Stereo 2 Welcome ! Thank you for purchasing this Sony Cassette Player. You can enjoy its various features even more with: Optional CD/MD units (both changers and players)*1. CD TEXT information (displayed when a CD TEXT disc*2 is played on a connected optio

3、nal CD unit with the CD TEXT function). Optional TV/Video units*1 Supplied controller accessory Card remote commander RM-X114 Optional controller accessory Rotary commander RM-X4S *1 This unit works with Sony products only. *2 A CD TEXT disc is an audio CD that includes information such as the disc

4、name, artist name, and track names. This information is recorded on the disc. 3 Table of Contents Location of controls . . . . . . . . . . . . . . . . . . . 4 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Notes on Cassettes. . . . . . . . . . . . . . . . . . . . . 6 Getting Start

5、ed Resetting the unit. . . . . . . . . . . . . . . . . . . . . . 7 Detaching the front panel . . . . . . . . . . . . . . . 7 Setting the clock . . . . . . . . . . . . . . . . . . . . . . 8 Cassette Player Listening to a tape . . . . . . . . . . . . . . . . . . . . . 9 Playing a tape in various modes

6、 . . . . . . . . . . 9 Radio Storing stations automatically Best Tuning Memory (BTM). . . . . . . 10 Receiving the stored stations. . . . . . . . . . . . 10 Storing only the desired stations . . . . . . . . . 11 Storing station names Station Memo. . . . . . . . . . . . . . . . . . . 11 Tuning in a s

7、tation through a list List-up . . . . . . . . . . . . . . . . . . . . . . . . 12 Other Functions Using the rotary commander. . . . . . . . . . . . 13 Adjusting the sound characteristics. . . . . . . 14 Quickly attenuating the sound. . . . . . . . . . . 14 Changing the sound and display settings Menu

8、 . . . . . . . . . . . . . . . . . . . . . . . . . 15 Selecting the sound position My Best sound Position (MBP). . . . . 16 Setting the equalizer . . . . . . . . . . . . . . . . . . 16 CD/MD Unit (optional) Playing a CD or MD. . . . . . . . . . . . . . . . . . 17 Display items . . . . . . . . . . .

9、. . . . . . . . . . . . 18 Playing tracks repeatedly Repeat Play . . . . . . . . . . . . . . . . . . . . 18 Playing tracks in random order Shuffle Play. . . . . . . . . . . . . . . . . . . . 18 Labelling a CD Disc Memo . . . . . . . . . . . . . . . . . . . . 19 Locating a disc by name List-up. . . .

10、 . . . . . . . . . . . . . . . . . . . . 20 Selecting specific tracks for playback Bank . . . . . . . . . . . . . . . . . . . . . . . . . 20 TV/Video (optional) Watching the TV. . . . . . . . . . . . . . . . . . . . . 21 Watching a video . . . . . . . . . . . . . . . . . . . . 21 Storing TV channels

11、 automatically. . . . . . . 22 Storing only the desired TV channels. . . . . 22 Watching the TV or video while listening to a tape, CD or MD Simultaneous Play. . . . . . . . . . . . . . . 22 Additional Information Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 23 Removing the unit. . .

12、. . . . . . . . . . . . . . . . . 24 Specifications . . . . . . . . . . . . . . . . . . . . . . . 25 Troubleshooting . . . . . . . . . . . . . . . . . . . . . 26 Error displays . . . . . . . . . . . . . . . . . . . . . . . 27 4 Location of controls Refer to the pages listed for details. : During tap

13、e playback : During radio reception : During menu mode : During CD/MD playback (optional) : During TV reception (optional) a MBP button 16 b MENU button 8, 9, 10, 11, 12, 15, 16, 17, 19, 20, 21, 22 c Volume control dial d LIST button 11, 12 19, 20 e Receptor for the card remote commander f SOURCE (P

14、ower on/Tape/Radio/CD/ MD/TV) button 5, 9, 10, 11, 16, 17, 19, 21, 22, 23 g Display window h Z (eject) button (located on the front side of the unit, behind the front panel) 9, 23 i OPEN button 7, 9 j EQ7 button 16 k RESET button (located on the front side of the unit, behind the front panel) 7 l OF

15、F (Stop/Power off) button* 5, 7, 9, 17 m Frequency select switch (located on the bottom of the unit) See “Frequency select switch” in the Installation/Connections manual. n SOUND button 14, 16 o ENTER button 12 8, 9, 10, 11, 12, 15, 16, 17, 19, 20, 21, 22, 23 19, 20 p MODE (o) button 9 10, 11 17, 19

16、 21 q DSPL (display mode change) button 12, 18, 19 r Number buttons (1) REP 9 10, 11 (1) REP 18 (2) SHUF 18 22 * Warning when installing in a car without an ACC (accessory) position on the ignition switch After turning off the ignition, be sure to press (OFF) on the unit for 2 seconds to turn off th

17、e clock display. Otherwise, the clock display does not turn off and this causes battery drain. TAPERADIOMENU CD/MDTV XR-CA620X RADIO CD/MD RADIO MENU CD/MD TAPE RADIO CD/MD TV TAPE RADIO CD/MD TV 5 s DISC/PRESET buttons (+/) 10, 11, 12 8, 9, 10, 11, 12, 15, 16, 17, 19, 20, 21, 22 17, 19, 20 21 t SEE

18、K buttons (/+) 9 10, 11 8, 9, 14, 15, 16, 17, 21 17, 19, 20 22, 23 The corresponding buttons of the card remote commander control the same functions as those on this unit. a DSPL button b MENU button c SOURCE button d SEEK ( (DISC/PRESET) (+): to select upwards In menu mode, the currently selectable

19、 button (s) of these four are indicated with a “ M” in the display. (DISC/PRESET) (): to select downwards RADIO MENU CD/MD TV TAPE RADIO MENU CD/MD TV Card remote commander RM-X114 (optional) DISC ATTOFF DSPLMODE SOURCE DISC + VOL + PRESET + SEEK+SEEK PRESET SOUND ENTER MENU LIST 6 Precautions If yo

20、ur car was parked in direct sunlight, allow the unit to cool off before operating it. If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse. If no sound comes from the speakers of a two- speaker system, set the fader control to the centre p

21、osition. When a tape is played back for a long period, the cassette may become warm because of the built-in power amplifier. However, this is not a sign of malfunction. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony de

22、aler. To maintain high quality sound Be careful not to splash juice or other soft drinks onto the unit or tapes. Notes on Cassettes Cassette care Do not touch the tape surface of a cassette, as any dirt or dust will contaminate the heads. Keep cassettes away from equipment with built-in magnets such

23、 as speakers and amplifiers, as erasure or distortion on the recorded tape could occur. Do not expose cassettes to direct sunlight, extremely cold temperatures, or moisture. Slack in the tape may cause the tape to be caught in the machine. Before you insert the tape, use a pencil or similar object t

24、o turn the reel and take up any slack. Distorted cassettes and loose labels can cause problems when inserting or ejecting tapes. Remove or replace loose labels. The sound may become distorted while playing the cassette. The cassette player head should be cleaned after each 50 hours of use. The use o

25、f cassettes longer than 90 minutes is not recommended except for long continuous play The tape used for these cassettes is very thin and tends to stretch easily. Frequent playing and stopping of these tapes may cause them to become entangled in the cassette deck mechanism. Slack 7 Getting Started Re

26、setting the unit Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel and press the RESET button with a pointed object, such as a ballpoint pen. Note Pressing the RESET button will erase the clock setting and some stored con

27、tents. Detaching the front panel You can detach the front panel of this unit to protect the unit from being stolen. Caution alarm If you turn the ignition switch to the OFF position without removing the front panel, the caution alarm will beep for a few seconds. If you connect an optional amplifier

28、and do not use the built-in amplifier, the beep sound will be deactivated. 1Press (OFF)*. Tape playback or radio reception stops (the key illumination and display remain on). * If your car has no ACC position on the ignition switch, be sure to turn the unit off by pressing (OFF) for 2 seconds to avo

29、id car battery drain. 2Press (OPEN), then slide the front panel to the right, and gently pull out the left end of the front panel. Notes If you detach the panel while the unit is still turned on, the power will turn off automatically to prevent the speakers from being damaged. Do not drop or put exc

30、essive pressure on the front panel and its display window. Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in parked cars or on dashboards/rear trays. Tip When carrying the front panel with you, use the supplied front panel case. RESET button continue to next pa

31、ge t 1 2 8 Attaching the front panel Place hole A of the front panel onto the spindle B on the unit, then lightly push the left side in. Note Do not put anything on the inner surface of the front panel. Setting the clock The clock uses a 12-hour digital indication. Example: To set the clock to 10:08

32、 1Press (MENU), then press either side of (DISC/PRESET) repeatedly until “CLOCK” appears. 1Press (ENTER). The hour indication flashes. 2Press either side of (DISC/PRESET) to set the hour. 3Press the (+) side of (SEEK). The minute indication flashes. 4Press either side of (DISC/PRESET) to set the min

33、ute. 2Press (ENTER). The clock starts. After the clock setting is completed, the display returns to normal play mode. Tip When D.INFO mode is set to ON, the time is always displayed (page 15). x 9 Cassette Player Listening to a tape 1Press (OPEN) and insert a cassette. Playback starts automatically.

34、 2Close the front panel. If a cassette is already inserted, press (SOURCE) repeatedly until “FORWARD” or “REVERSE” appears to start playback. FORWARD: The side facing up is played. REVERSE: The side facing down is played. Note The AMS function may not work when: the blanks between tracks are shorter

35、 than 4 seconds. there is noise between tracks. there are long sections of low volume or quiet sections. Playing a tape in various modes You can play the tape in various modes: METAL lets you play a metal or CrO2 tape. BL.SKP (Blank Skip) skips blanks longer than 8 seconds. ATA (Automatic Tuner Acti

36、vation) turns on the tuner automatically when fast-winding the tape. 1During tape playback, press (MENU). 2Press either side of (DISC/PRESET) repeatedly until the desired mode appears. 3Press (+) side of (SEEK) to select “ON.” Example: ATA mode Play mode starts. 4Press (ENTER). To return to normal p

37、layback mode, select “OFF” in step 3. Playing tracks repeatedly Repeat Play During playback, press (1) (REP) repeatedly until “REP-ON” in the display appears. To return to normal playback mode, select “REP- OFF.” Tip During repeat playback, press (MODE). “REP” disappears from the display and repeat

38、mode is cancelled. ToPress Change the tapes playback direction (MODE) (o) Stop playback(OFF) Eject the cassette(OPEN) then Z Skip tracks Automatic Music Sensor (SEEK) (./) once for each track Fast-forward/ reverse Manual Search (SEEK) (m/M) hold to desired point 10 Radio The unit can store up to 6 s

39、tations per band (FM1, FM2, FM3, MW, SW1, and SW2). Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents. Storing stations automatically Best Tuning Memory (BTM) The unit selects the stations with the strongest signals within the selected band, and stores them i

40、n the order of their frequency. 1Press (SOURCE) repeatedly to select the radio. 2Press (MODE) repeatedly to select the band. 3Press (MENU), then press either side of (DISC/PRESET) repeatedly until “BTM” appears. 4Press (ENTER). A beep sounds when the setting is stored. Notes If only a few stations c

41、an be received due to weak signals, some number buttons will retain their former settings. When a number is indicated in the display, the unit starts storing stations from the one currently displayed. Receiving the stored stations 1Press (SOURCE) repeatedly to select the radio. 2Press (MODE) repeate

42、dly to select the band. 3Press the number button (1) to (6) on which the desired station is stored. Tip Press either side of (DISC/PRESET) to receive the stations in the order they are stored in the memory (Preset Search function). If preset tuning does not work Press either side of (SEEK) to search

43、 for the station (automatic tuning). Scanning stops when the unit receives a station. Repeat until the desired station is received. Tips If automatic tuning stops too frequently, turn on the Local Seek to limit seek to stations with stronger signals (see “Changing the sound and display settings” on

44、page 15). If you know the frequency of the station you want to listen to, press and hold either side of (SEEK) to locate the approximate frequency, then press (SEEK) repeatedly to fine adjust to the desired frequency (manual tuning). If FM stereo reception is poor Select monaural reception mode. (se

45、e “Changing the sound and display settings” on page 15). The sound improves, but becomes monaural (“ST” disappears). Note If interference occurs, this unit will automatically narrow the reception frequency to eliminate noise (IF AUTO function). In such cases, some FM stereo broadcasts may become mon

46、aural while in the stereo reception mode. Tip To always hear FM stereo broadcasts in stereo, you can change the IF AUTO setting and widen the frequency signal reception (see “Changing the sound and display settings” on page 15). Note that some interference may occur in this setting. 11 Storing only

47、the desired stations You can manually preset the desired stations on any chosen number button. 1Press (SOURCE) repeatedly to select the radio. 2Press (MODE) repeatedly to select the band. 3Press either side of (SEEK) to tune in the station that you want to store. 4Press the desired number button (1)

48、 to (6) for 2 seconds until “MEM” appears. The number button indication appears in the display. Note If you try to store another station on the same number button, the previously stored station will be erased. Storing station names Station Memo You can assign a name to each radio station and store i

49、t in memory. The name of the station currently tuned in appears in the display. You can assign a name using up to 8 characters for a station. Storing the station names 1Tune in a station whose name you want to store. 2Press (MENU), then press either side of (DISC/PRESET) repeatedly until “NAMEEDIT” appears. 3Press (ENTER). 4Enter the characters. 1Press the (+)*1 side of (DISC/PRESET) repeatedly to select the desired character. A t B t C t 0 t 1 t 2 t + t t * t _*2 t A *1 F