RadioShack_PRO-2044_user.pdf
《RadioShack_PRO-2044_user.pdf》由会员分享,可在线阅读,更多相关《RadioShack_PRO-2044_user.pdf(30页珍藏版)》请在收音机爱好者资料库上搜索。
1、PRO-2044 Programmable 80-Channel Home Scanner (200-0416) Banks and Bands Faxback Doc. # 38285 You can store up to 90 frequencies into either a permanent memory location called a channel, or a temporary memory location called a monitor memory. You can store up to 80 channels and up to 10 monitor memo
2、ries. Your scanner also has eight frequency bands, each covering a specific range of frequen- cies you can search. Channel-Storage Banks To make it easier to identity and select the frequencies you want to listen to, the scanners channels are divided into 10 channel-storage banks (1-10) of 8 channel
3、s each. You can use each channel-storage bank to group freq- uencies, such as those used by the police department, fire department, ambulance services, and aircraft (see Guide to the Action Bands on Faxback Doc. # 38288). For example, there might be three or four police departments in your area, eac
4、h using several different frequencies. Additionally, there might be other law enforcement agencies such as state police, county sheriffs, or SWAT teams that use their own frequencies. You could program all law enforcement frequencies starting with Channel 1 (the first channel in Bank 1), then progra
5、m the fire department, paramedic, and other public safety frequencies starting with Channel 17 (the first channel in Bank 3). Monitor Memories Monitor memories are temporary storage areas where you can store up to 10 frequencies during a band search or direct search while you decide whether to save
6、them into channels. You can manually select and listen to monitor memories. Frequency Bands Your scanner has eight frequency bands, each covering a specific range of frequencies. You can search these bands for specific broadcasts by repeat- edly pressing BAND until the scanner displays the band you
7、want. For example, you can search through all frequencies between 29.000 and 54.000 MHz for specific broadcasts by repeatedly pressing BAND until 29-54 appears on the display. The scanner then automatically searches the freq- uencies in that band. This table shows the frequency band range displayed
8、by the scanner and the typical usage, frequency coverage, and step rate for each. DISPLAYED FREQUENCY FREQUENCY COVERAGE STEP RATE BAND RANGE TYPICAL USAGE (MHz) (MHz) 29-54 10-Meter Amateur Radio VHF 29.000 to 54.000 5.0 Lo, 6-Meter Amateur Radio 108-136 Aircraft 108.000 to 136.9750 12.5 137-144 Go
9、vernment 137.000 to 144.0000 5.0 144-148 2-Meter Amateur Radio 144.000 to 148.0000 5.0 148-174 VHF Hi 148.000 to 174.0000 5.0 406-450 Government, 70-Centimeter 406.000 to 450.0000 12.0 Amateur Radio 450-470 UHF Lo 450.000 to 470.0000 12.5 470-512 UHF T Band 470.000 to 512.0000 12.5 NOTES: Your scann
10、er searches at the preset frequency step rate (5 or 12.5 kHz) for each frequency. You cannot change the frequency step rate. While searching through a frequency band, you might hear a freq- uency you want to store. You can store any frequency into a monitor memory. When you store a frequency in a mo
11、nitor memory, that frequency also remains in the frequency band. You cannot change or delete any of the frequencies in the frequency bands. (EB 3/10/97) Privacy Policy PRO-2044 Programmable 80-Channel Home Scanner (200-0416) Controls/Display Faxback Doc. # 38284 Understanding Your Scanner NOTE: Some
12、 of the scanners keys perform more than one function and are marked with more than one label. The steps in your owners manual show only the label on the key appropriate to the action being per- formed. A Look at the Front Panel A quick glance at this section should help you understand each controls
13、function. VOLUME - Turns the scanner on or off and adjusts the volume. SQUELCH - Adjusts the scanners squelch. See Turning On the Scanner/Setting Volume and Squelch on Faxback Doc. # 38286. / - / - Enters the direction the scanner will search. HOLD - Holds/resumes a direct or band search. MONITOR -
14、Stores frequencies into and accesses the 10 monitor memories. See Monitor Memories on Faxback Doc. # 38285. LOCKOUT/S/S - Locks out selected channels during scanning, or skips (lockout/search/ a specified frequency during a band or direct search. skip) PROGRAM - Programs frequencies into channels. B
15、AND - Searches a band you select. See Frequency Bands on Faxback Doc. # 38285. _ DATA - Turns the scanners data detection feature on or off. DELAY - Programs a 2-second delay for the selected channel. PRIORITY/H/S - Sets and turns on or off priority for a particular (priority/hyper- channel, or sele
16、cts the hypersearch speed. search) SCAN - Scans through the channels. MANUAL - Stops scanning to let you listen to a monitor memory or directly enter a channel number. NUMBER KEYS - Each key has a single-digit label and a range of numbers. Use the digits on the keys to enter the numbers for a channe
17、l or a frequency. Use the range of numbers above the key (57-64, for example) to select the channels in a channel-storage band. See Channel-Storage Banks on Faxback Doc. # 38285. CLEAR/. - Clears an incorrect entry, or enters the decimal point when you enter a frequency. WX/E - Stores frequencies in
18、to channels, or scans the preset (weather/enter) weather frequencies. A look at the Display The display has indicators that show the scanners current operating mode. A good look at the display will help you understand your scanner. MON Appears with a number (1-10) to the right to show which monitor
19、memory you are listening to. BANK Appears with a number (1-10) to the right to show which channel- storage banks are turned on for scanning. See Understanding Banks and Bands on Faxback Doc. # 38285. P Appears when you tune to a priority channel. CH Appears with a number (1-80) to the left to show w
20、hich of the scanners 80 channels it is tuned to. MHz Appears with digits to the left to show which frequency your scanner is currently tuned to. SCAN Appears when you scan channels. MAN Appears when you manually select a channel. PGM Appears when you program the scanner. L/O Appears when you skip a
21、channel or frequency, when you manually (lockout) select a channel or frequency that is locked out or skipped. Or when a frequency is stored in search skip memory during a direct search or band search hold. PRI Appears when the priority feature is turned on. DLY Appears when scanning stops at a chan
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- RadioShack_PRO 2044 _user
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


