Sony_XR-CA360_XR-CA360X_user.pdf

《Sony_XR-CA360_XR-CA360X_user.pdf》由会员分享，可在线阅读，更多相关《Sony_XR-CA360_XR-CA360X_user.pdf（56页珍藏版）》请在收音机爱好者资料库上搜索。

1、 2003 Sony Corporation XR-CA360X XR-CA360 3-246-852-22 (1) Operating Instructions Manual de instrucciones GB ES CT For installation and connections, see the supplied installation/connections manual. Para obtener informacin sobre la instalacin y las conexiones, consulte el manual de instalacin/conexi

2、ones suministrado. FM/AM Cassette Car Stereo AUTOESTEREO PARA CASETE 2 Precautions If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. If no power is being supplied to the unit, check the connection

3、s first. If everything is in order, check the fuse. If no sound comes from the speakers of a 2-speaker system, set the fader control to the centre position. When a tape is played back for a long period, the cassette may become warm because of the built-in power amplifier. However, this is not a sign

4、 of malfunction. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. To maintain high quality sound If you have drink holders near your audio equipment, be careful not to splash juice or other soft drinks onto the c

5、ar audio. Sugary residues on this unit or cassette tapes may contaminate the playback heads, reduce the sound quality, or prevent sound reproduction altogether. Cassette cleaning kits cannot remove sugar from the tape heads. Welcome ! Thank you for purchasing this Sony Cassette Player. In addition t

6、o the cassette playback and radio operations, you can expand your system by connecting an optional CD/MD unit*1. When you operate this unit or a connected optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc*2. *1You can connect

7、a CD changer, an MD changer, a CD player, or an MD player. *2A CD TEXT disc is an audio CD that includes information such as the disc name, artist name, and track names. This information is recorded on the disc. 3 Notes on Cassettes Cassette care Do not touch the tape surface of a cassette, as any d

8、irt or dust will contaminate the heads. Keep cassettes away from equipment with built-in magnets such as speakers and amplifiers, as erasure or distortion on the recorded tape could occur. Do not expose cassettes to direct sunlight, extremely cold temperatures, or moisture. Slack in the tape may cau

9、se the tape to be caught in the machine. Before you insert the tape, use a pencil or similar object to turn the reel and take up any slack. Distorted cassettes and loose labels can cause problems when inserting or ejecting tapes. Remove or replace loose labels. The sound may become distorted while p

10、laying the cassette. The cassette player head should be cleaned after each 50 hours of use. Slack Cassettes longer than 90 minutes The use of cassettes longer than 90 minutes is not recommended except for long continuous play. The tape used for these cassettes is very thin and tends to stretch easil

11、y. Frequent playing and stopping of these tapes may cause them to become entangled in the cassette deck mechanism. 4 Table of Contents This Unit OnlyWith Optional Equipment Location of controls . 5 Getting Started Resetting the unit . 6 Detaching the front panel . 6 Setting the clock . 7 Cassette Pl

12、ayer Listening to a tape. 7 Radio reception during fast-forwarding or rewinding of a tape Automatic Tuner Activation (ATA). 8 Radio Storing stations automatically Best Tuning Memory (BTM) . 8 Storing only the desired stations . 9 Receiving the stored stations. 9 Other Functions Adjusting the balance

13、 and fader . 10 Attenuating the sound . 10 Changing the sound and display settings . 10 Setting the equalizer EQ3. 11 CD/MD Unit Playing a CD or MD . 12 Playing tracks repeatedly Repeat Play . 13 Playing tracks in random order Shuffle Play . 13 Additional Information Maintenance. 14 Removing the uni

14、t . 15 Specifications . 16 Troubleshooting guide . 17 5 Location of controls XR-CA360X/CA360 SOURCE MODE SEL RELEASE EQ3 DSPL ATT DISCREPSHUF ATA 123456BTMOFFSENS SEEK DIR Refer to the pages listed for details. 1 SOURCE (Radio/CD/MD) button 8, 9, 11, 12 2 MODE button During radio reception: Band sel

15、ect 8, 9 During CD/MD playback: CD/MD unit select 12 3 Volume +/ button 7, 10, 11 4 Z (eject) button 7, 8, 9, 12 5 Display window 6 m/M (fast winding)/DIR (tape transport direction change) buttons 7, 8 7 SEEK button Seek 9 Automatic Music Sensor 13 Manual search 13 8 DSPL (display mode change) butto

16、n 7, 12 9 EQ3 button 11 0 RELEASE (front panel release) button 6, 14 qa SEL (select) button 7, 10, 11, 12 qs RESET button (located on the front side of the unit behind the front panel) 6 qd ATT (attenuate) button 10 qf Number buttons 10, 12 During radio reception: Preset number select 9 During CD/MD

17、 playback: (1)DISC 13 (2)DISC + 13 (3)REP 13 (4)SHUF 13 qg Frequency select switch (located on the bottom of the unit) See “Frequency select switch” in the Installation/Connections manual. qh BTM/ATA button 8 qj SENS button 9 qk OFF button* 6 * Warning when installing in a car without ACC (accessory

18、) position on the ignition key switch Be sure to press (OFF) on the unit for 2 seconds to turn off the clock display after turning off the engine. When you press (OFF) momentarily, the clock display does not turn off and this causes battery wear. 6 6 Attaching the front panel Attach part A of the fr

19、ont panel to part B of the unit as illustrated and push the left side into position until it clicks. Notes Be sure not to attach the front panel upside down. Do not press the front panel too hard against the unit when attaching it. Do not press too hard or put excessive pressure on the display windo

20、w of the front panel. Do not expose the front panel to direct sunlight or heat sources such as hot air ducts, and do not leave it in a humid place. Never leave it on the dashboard of a car parked in direct sunlight or where there may be a considerable rise in temperature. Caution alarm If you turn t

21、he car ignition off without removing the front panel, the caution alarm will beep for a few seconds. If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be deactivated. Getting Started Resetting the unit Before operating the unit for the first time,

22、or after replacing the car battery or changing the connections, you must reset the unit. Remove the front panel and press the RESET button with a pointed object, such as a ballpoint pen. Note Pressing the RESET button will erase the clock setting and some memorised functions. Detaching the front pan

23、el You can detach the front panel of this unit to protect the unit from being stolen. 1Press (OFF). 2Press (RELEASE), then slide the front panel a little to the left, and pull it off towards you. Notes Be sure not to drop the panel when detaching it from the unit. If you detach the panel while the u

24、nit is still turned on, the power will turn off automatically to prevent the speakers from being damaged. When carrying the front panel with you, use the supplied front panel case. RESET button (OFF) (RELEASE) A B 7 7 Cassette Player Listening to a tape Insert a cassette. Playback starts automatical

25、ly. The side facing up is played. The side facing down is played. Tip To change the tapes playback direction, press m and M. To stop playback and eject the cassette Press Z. Fast-winding the tape During playback, press m or M. * The indicator will flash while fast-winding the tape. To start playback

26、 during fast-forwarding or rewinding, press the other fast-winding button partially until the locked button is released. Setting the clock The clock uses a 12-hour digital indication. Example: To set the clock to 10:08 1Press (DSPL) for 2 seconds. The hour indication flashes. 1 Press either side of

27、the volume button to set the hour. 2 Press (SEL). The minute indication flashes. 3 Press either side of the volume button to set the minute. 2 Press (DSPL). The clock starts. After the clock setting is complete, the display returns to normal play mode. To rewind m M Direction indicator* FWD REV To a

28、dvance M m to go forward to go back to go forward to go back 8 8 Radio Storing stations automatically Best Tuning Memory (BTM) The unit selects the stations with the strongest signals and stores them in the order of their frequencies. You can store up to 6 stations on each band (FM1, FM2, FM3, AM1,

29、and AM2). Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents. 1Press (SOURCE) repeatedly to select the radio. In case of tape playback, press Z to eject the tape. Each time you press (SOURCE), the source changes as follows: Radio t CD* t MD* * If the correspon

30、ding optional equipment is not connected, this item will not appear. 2Press (MODE) repeatedly to select the band. Each time you press (MODE), the band changes as follows: FM1 t FM2 t FM3 t AM1 t AM2 3Press (BTM) (ATA) for 2 seconds. The unit stores stations in the order of their frequencies on the n

31、umber buttons. A beep sounds when the setting is stored. Notes The unit does not store stations with weak signals. If only a few stations can be received, some number buttons will retain their former setting. When a number is indicated in the display, the unit starts storing stations from the one cu

32、rrently displayed. Radio reception during fast-forwarding or rewinding of a tape Automatic Tuner Activation (ATA) When fast-forwarding or rewinding with the m or M button, the radio will turn on automatically. During playback, press (BTM) (ATA) repeatedly until “ATA-ON” in the display appears. ATA-O

33、N y ATA-OFF ATA mode starts. To return to normal play mode, select “ATA- OFF.” 9 9 Storing only the desired stations You can preset up to 18 FM stations (6 each for FM1, 2, and 3) and up to 12 AM stations (6 each for AM1 and 2) in the order of your choice. 1Press (SOURCE) repeatedly to select the ra

34、dio. In case of tape playback, press Z to eject the tape. 2Press (MODE) repeatedly to select the band. 3Press either side of (SEEK) to tune in the station that you want to store on the number button. 4Press the desired number button (1) to (6) until “MEM” appears. The number button indication appear

35、s in the display. Note If you try to store another station on the same number button, the previously stored station will be erased. Receiving the stored stations 1Press (SOURCE) repeatedly to select the radio. In case of tape playback, press Z to eject the tape. 2Press (MODE) repeatedly to select th

36、e band. 3Press the number button (1) to (6) on which the desired station is stored. If you cannot tune in a preset station Automatic tuning/Local Seek Mode Automatic tuning: Press either side of (SEEK) to search for the station. Scanning stops when the unit receives a station. Press either side of (

37、SEEK) repeatedly until the desired station is received. Local Seek Mode: If the automatic tuning stops too frequently, press (SENS) repeatedly until “LOCAL-ON” appears. “LCL” indicator is displayed. Only the stations with relatively strong signals will be tuned in. Tip If you know the frequency of t

38、he station you want to listen to, press either side of (SEEK) until the desired frequency appears (manual tuning). If FM stereo reception is poor Monaural Mode During radio reception, press (SENS) repeatedly until “MONO-ON” appears. “MONO” indicator is displayed. The sound improves, but becomes mona

39、ural (“ST” disappears). To return to normal radio reception mode, select “MONO-OFF.” 10 Changing the sound and display settings The following items can be set: A.SCRL (Auto Scroll)* (page 12). M.DSPL (Motion Display) the demonstration mode which appears when the tape is ejected and no source is sele

40、cted (e.g., tuner is turned off). BEEP to turn the beep sound on or off. 1Press (SEL) and the desired preset number button simultaneously. (SEL) + (3): A.SCRL* (SEL) + (4): M.DSPL (SEL) + (6): BEEP * When no CD or MD is playing, this item will not appear. 2Press (SEL) and the preset number button re

41、peatedly to select the desired setting (Example: ON or OFF). Other Functions Adjusting the balance and fader You can adjust the balance and fader. 1Press (SEL) repeatedly until “BAL” or “FAD” appears. Each time you press (SEL), the item changes as follows: LOW* t MID* t HIGH* t BAL (left-right) t FA

42、D (front-rear) * When EQ3 is activated (page 11). 2Press either side of the volume button to adjust the selected item. Adjust within 3 seconds after selecting the item. Attenuating the sound Press (ATT). After “ATT-ON” momentarily flashes, the “ATT” indication appears in the display. To restore the

43、previous volume level, press (ATT) again. “ATT-OFF” flashes momentarily. 11 Setting the equalizer EQ3 You can select an equalizer curve for 7 music types (XPLOD, VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM, and OFF (equalizer OFF). You can store a different equalizer setting for each source. Selecting

44、the equalizer curve 1Press (SOURCE) to select a source (Radio, CD or MD) or insert a cassette. 2Press (EQ3) repeatedly to select the desired equalizer curve. Each time you press (EQ3), the item changes. To cancel the equalizing effect, select “OFF.” Adjusting the equalizer curve You can store and ad

45、just the equalizer settings for different tone ranges. 1Press (SOURCE) to select a source (Radio, CD or MD) or insert a cassette. 2Press (EQ3) repeatedly to select the desired equalizer curve. 3Adjusting the equalizer curve. 1 Press (SEL) repeatedly to select the desired tone range. Each time you pr

46、ess (SEL), the tone range changes. LOW t MID t HI (t BAL t FAD) 2 Press either side of the volume button repeatedly to adjust to the desired volume level. The volume level is adjustable by 1 dB steps from 10 dB to +10 dB. 3 Repeat step 1 and 2 to adjust the equalizer curve. To restore the factory-se

47、t equalizer curve, press (SEL) for 2 seconds. After 3 seconds, the display returns to normal play mode. Note When EQ3 is set to “ OFF,” you cannot adjust the equalizer settings. 12 Automatically scrolling a display item Auto Scroll If the disc name, artist name, or track name on a CD TEXT disc or MD exceeds 8 characters and the Auto Scroll function is on, information automatically scrolls across the display as follows: The disc