Yaesu_FC-40_broch.pdf

《Yaesu_FC-40_broch.pdf》由会员分享，可在线阅读，更多相关《Yaesu_FC-40_broch.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、NEW PRODUCT NEWS FC-40 The FC-40 is a microprocessor-controlled antenna impedance matching network designed to provide all-amateur-band transmitting capability with the FT-897/857 Series of transceivers, when used with an end-fed random wire or long whip antenna. The FC-40 makes use of the control c

2、ircuitry built into the transceiver, which allows the operator to control and monitor automatic operation of the FC-40, which mounts near the antenna feedpoint. The FC-40 uses specially-selected, thermally- stable components, and is housed in a waterproof case to withstand severe environmental condi

3、tions with high reliability. A carefully-chosen combination of solid-state switching components and high-speed relays allows the FC- 40 to match a wide variety of antennas to within a 2:1 SWR on any amateur band frequency (160 through 5 meters), typically in less than ten seconds. Transmitter power

4、required for matching may be as little as 4 - 60 Watts, and matching settings are automatically stored in memory for instant recall when the same frequency range is selected later. Automatic-Matching 100-Memory Antenna Tuner Automatic Matching for FT-897/857 Series Transceivers 100 Match-Point Data

5、Memories WATER PROOFWATER PROOF 9.4 x 7 x 2.1 236 x 175 x 53 mm COMPACT SIZE FC-40 Operating Frequency Range: 1.8 - 54 MHz with 20+ m end-fed wire, 7 - 54 MHz with YA-007 HF 2.5 m Mobile Whip Antenna Input Impedance: 50-Ohms Maximum Power: 100 Watts Matched SWR: 2.0:1 or less (if antenna is not a mu

6、ltiple of 1/2 ) Tune-up Power: 4 W 60 W Tune-up Time: 10 seconds maximum Impedance Matching Memories: 100 channels Power supply: 13.8 V DC 15% (supplied from transceiver) Case Size (WHD): 9.4 x 7 x 2.1 (236 x 175 x 53 mm) Weight: 2.6 lbs. (1.2 kg) Automatic-Matching 100-Memory Antenna Tuner 2004.050

7、5NAPrinted in Japan VERTEX STANDARD CO., LTD. For the latest Yaesu news,visit us on the Internet: 4-8-8 Nakameguro, Meguro-ku, Tokyo 153-8644, Japan VERTEX STANDARD US Headquarters 10900 Walker Street, Cypress, CA 90630, U.S.A. YAESU EUROPE B.V. P.O. Box 75525, 1118 ZN Schiphol, The Netherlands YAES

8、U UK LTD. Unit 12, Sun Valley Business Park, Winnall Close Winchester, Hampshire, SO23 0LB, U.K. VERTEX STANDARD HK LTD. Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road, Kwun Tong, Kowloon, Hong Kong Email: http:/www.yaesu.co.uk Email: salesyaesu.co.uk Phone 714/827-7600; Fax 714/827-8100 .hk Sp

9、ecifications The FC-40 requires only two (supplied) interconnections to your FT-897/857 Transceiver: a coaxial RF cable and a data/control cable. All required power is supplied from the transceiver, and then you just connect your antenna and ground leads for instant operation on your favorite band!

10、Rugged, low-loss components are employed throughout the FC-40, to ensure reliable operation for many years in a wide range of environmental situations. The high-Q matching network ensures the efficient transfer of power to the antenna radiating element, with the convenience of instant band change th

11、anks to the microprocessor control circuitry. ANT FC-40 GND Coaxial Cable (5 m) Control Cable (5 m) About this brochure: we have made this brochure as comprehensive and factual as possible. We reserve the right, however, to make changes at any time in equipment, optional accessories, specifications,

12、 model numbers, and availability. Precise frequency range may be different in some countries. Some accessories shown herein may not be available in some countries. Some information may have been updated since the time of printing; please check with your Authorized Yaesu Dealer for complete details. FT-897D