Yaesu_M-1_user.pdf

《Yaesu_M-1_user.pdf》由会员分享，可在线阅读，更多相关《Yaesu_M-1_user.pdf（20页珍藏版）》请在收音机爱好者资料库上搜索。

1、 Contents General Description .1 Safety Precautions .2 Controls & Connections .4 PTT key .4 LOCK key .4 MIC .5 Angle adjustment knobs .5 Height adjustment ring .5 Display .6 Graphic equalizer adjustment knobs .6 DUAL key .7 C/D key .7 Equalizer memory keys .8 Recording/Playback key.8 LC (Low Cut) ke

2、y .9 THR (THRU) key .9 MIC GAIN adjustment knobs.10 Supplied Accessories Treble boost cowling .1 AC Adapter (SAD-17 or SAD-22) .1 Power Code .1 Microphone Cable .1 Dedicated Alignment Tool .2 Instruction Manual (this manual) .1 Warranty Card .1 SCOPE key .10 MONITOR Volume knob .10 POWER Switch .11

3、DC IN 5V Jack.11 PHONES Jack.11 RX AUDIO IN Jack .12 MIC Jack .12 Cannon (XLR) Microphone Connector .12 PTT key operation selector switch .13 RX ATT switch .13 Convenience Functions .14 Setting the Display Contrast.14 Reset .15 Frequency characteristics of the microphone .16 Specifjcations .16 1M-1

4、Operating Manual General Description Dual microphone confjguration features The M-1 features two built-in microphone elements, one dynamic and one condenser. The unique output signals may be individually crafted and then blended to produce a single rich voice signal. The condenser microphone respond

5、s to a broad frequency range including the distinctive crisp highs, while the dynamic microphone adds depth and warmth, providing the emotional subtext desirable for a genial “ragchew”. The M-1 lets you fjne-tune and balance the two microphone sources to create a sound that will compliment your own

6、voice. Nine-band graphic equalizer for each microphone element The nine-band graphic equalizer is applied to each microphone element independently, giving total fmexibility to accentuate and enhance the frequency characteristics of both the dynamic and condenser microphone output signals. The indivi

7、dual frequency profjles are easily adjusted on the graphic equalizer, using the rotary encoders below the dis- play. The built-in equalizer memories can store two different groups of settings for each microphone. Stored settings (Memories 1 and 2) can be accessed instantly. A through (fmat) preset i

8、s also provided. By blending the two microphone outputs togeth- er, you can create your own unique tonal quality. The M-1 adds a new level to the audio creative process. Treble boost cowling produces a unique tonal texture The simple clip-on cowling enhances the high-frequency response of both micro

9、phone elements, and can minimize the aural interference from either side. The cowling serves to concentrate the voice input with a peak at around 1 - 1.5 kHz, producing a unique ton- al texture. Air cylinder magnetic contactless PTT key The PTT key with contactless triple air cylinder magnetic const

10、ruction delivers smooth fjngertip-sensitive operation over an extended stroke distance. The key has been designed with optimal balance between key weight and stroke to pro- vide the perfect tactile response. Meanwhile, the contactless switch provides years of fault-free operation with minimal mechan

11、ical degradation. r The built-in record and playback feature provides monitoring your voice in the head- phones to allow meticulous evaluation and adjustment. r Features a built-in, one-click DSP fjlter that is independent of the graphic equalizer. r Connect headphones directly to the M-1 and check

12、the microphone audio in real time, listen to test recordings, or monitor the transceiver signal. r The M-1 microphone outputs include a balanced XLR jack as used on professional sound equipment for superior audio quality and noise shielding. 2M-1 Operating Manual Safety Precautions Note beforehand t

13、hat the company shall not be liable for any damages suffered by the customer or third parties in using this product, or for any failures and faults that occur during the use or misuse of this product, unless otherwise pro- vided for under the law. Type and meaning of the symbols DANGER This symbol i

14、ndicates the possibility of death or serious injury being inflicted on the user and the surrounding people when these instructions are ignored and the product is mishandled. WARNING This symbol indicates the possibility of death or serious injury being inflicted on the user and the surrounding peopl

15、e when these instructions are ignored and the product is mishandled. CAUTION This symbol indicates the possibility of physical impediments occurring or impediments being inflicted on the user and the surrounding people when these instructions are ignored and the product is mishandled. Type and meani

16、ng of symbols Prohibited actions that must not be attempted, in order to use this radio safely. For example, signifjes that disassembly is prohibited. Precautions that must be adhered to in order to use this radio safely. For example, signifjes that the power supply is to be disconnected. DANGER Do

17、not use this product while driving or riding a motorbike. This may result in accidents. Make sure to stop the car in a safe location fjrst before use if the device is going to be used by the driver. Do not touch any liquid leaking from the liquid display with your bare hands. There is a risk of chem

18、ical burns occurring when the liquid comes into contact with the skin or gets into the eyes. In this case, seek medical treatment immediately. WARNING Do not dismantle or modify the device. This may result in injury, electric shock and equipment failure. When smoke or strange odors are emit- ted fro

19、m the radio, turn off the power and dis-connect the power cord from the socket. This may result in fjre, liquid leak, overheat- ing, damage, ignition and equipment fail- ure. Please contact our company amateur customer support or the retail store where you purchased the device. Do not handle the pow

20、er plug and con- nector etc. with wet hands. Also do not plug and unplug the power plug with wet hands. This may result in injury, liquid leak, electric shock and equipment failure. Keep the power plug pins and the sur- rounding areas clean at all times. This may result in fjre, liquid leak, overhea

21、t- ing, breakage, ignition etc. 3 Safety Precautions M-1 Operating Manual Please do not use a voltage other than the specifjed power supply voltage. Doing so could cause fjre, electric shock or damage to the equipment. Do not install in places where the unit risks getting wet (such as near a humid-

22、ifjer). Doing so may result in fjre, electric shock or damage. Do not use a power supply cable other than the one provided. Doing so could cause fjre, electric shock or damage to the equipment. Do not place heavy objects on the power supply cable or connection cable, forc- ibly bend, twist or pull o

23、n the cables, or heat or modify them. Doing so may scratch or damage the ca- bles, resulting in fjre, electric shock or dam- age to the equipment. Do not pull on the cable section when disconnecting the power supply cable or connection cable. Doing so could cause fire, electric shock or damage to th

24、e equipment. Hold the plug or the connector when disconnecting the cable. Do not use the power supply cable or connection cable if it is damaged or if the connection of the power connector is loose. Doing so could cause fire, electric shock or damage to the equipment. Contact your dealer or our cust

25、omer support. CAUTION Do not place the unit on an unstable place or a place subject to much vibra- tion. The unit may fall or tip over, resulting in fjre, injury or malfunction. Do not place heavy objects on top of the unit. The unit may fall or tip over, resulting in injury. Do not place objects co

26、ntaining water, such as vases, cosmetics or cups, on top of the unit. The water may spill and get inside the unit, resulting in fjre or malfunction. Do not place small metal objects such as clips on top of the unit. The object may get inside, resulting in fjre or malfunction. Do not place the unit i

27、n humid or dusty places. Doing so could cause fjre or malfunction. Do not use the headphones at high vol- ume. Listening to continuous loud sound over the headphones may the damage the ears. When using the headphones, lower the volume to the minimum before turning on the power. Failure to do so may

28、cause hearing disor- ders. Do not wipe the case with thinner or benzene. Use a soft, dry cloth to wipe dirt off the case. Do not drop the unit or subject it to strong shocks. Doing so could cause injury or malfunction. For the sake of safety, disconnect the power supply cable when not planning to us

29、e the unit for a prolonged period. Do not lift the unit holding on to the dial or another knob. Doing so could cause damage to knob, panel, substrate, etc. Disconnect the power supply cable and all cables connecting the unit to the ra- dio before moving the microphone. Do not place the unit in place

30、s exposed to direct sunlight or near heating appli- ances. Doing so could cause deformation, discol- oration, etc. Store in a place out of the reach of small children. Failure to do so could result in injury, etc. Do not use products other than those specifjed by Yaesu. Doing so may result in malfun

31、ction. 4M-1 Operating Manual Controls & Connections Dedicated Adjustment Tools (2) These are tools for turning the equalizer and microphone gain knobs. The tools may be stored in the brackets on each side of the microphone base. On Air Indicator This illuminates in red when in TX mode. The indicator

32、 is off when in RX mode. PTT key Press and hold down this key to transmit, and release it to receive. r The PTT key operating selector switch on the bottom of the base unit may be switched to the “HOLD” side. Then when the PTT key is pressed briefmy, the TX mode will be held until the PTT key is pre

33、ssed again. Caution: The PTT key has a built in the magnetic sensor. Strong magnetic items, such as a speaker or a magnet, may affect this PTT key, resulting in mal- functions. LOCK key This is a one touch PTT key with a lock function. When the LOCK key is pressed, the transmit mode is set and held,

34、 When the key is pressed again the transceiver returns to receive mode again. r Operation of the PTT key is disabled when the LOCK key is operated. r The LOCK key indicator lights up red when the LOCK key is in operated. 5 Controls & Connections M-1 Operating Manual MIC The unit includes a built-in

35、dynamic microphone and a condenser micro- phone that are developed for communications equipment. The condenser microphone provides crisp sound with transparent frequency characteristics up to high frequencies. The dynamic microphone produces a thick, deep, warm sound quality that is suited for infor

36、mal chatting. These two types of microphones are each equipped with an independent 9-band graphic equalizers, allowing the output frequency characteristics of the separate elements to be precisely controlled. It is also possible to combine the audio output signals from the two microphone ele- ments.

37、 r The included treble boost cowling may be installed to block sounds from the sides of the microphone, resulting in unique frequen- cy characteristics as if the sound were con- densed with a peak response in the vicinity of 1 to 1.5 kHz. To install the cowling, press it straight on from the front t

38、o cover the micro- phone. To remove, slide it straight off. Angle adjustment knobs The angle of the microphone may be adjust- ed by loosening (turn counterclockwise) the knobs on the left and right side of the pivot top. Place the microphone in the desired po- sition and then tighten the knobs (turn

39、 them clockwise) to secure the microphone. Height adjustment ring The height of the microphone can be pre- cisely adjusted. Turn the compression ring counterclockwise to loosen the top tube, and then raise or lower the top section to the desired position. Turn the compression ring clockwise to tight

40、en it and hold the mi- crophone in place. r The stand can be extended a maximum of 6 cm. Treble boost cowling 6 Controls & Connections M-1 Operating Manual Display The display alternates between the Graphic Equalizer and the Real-time Scope displays, as shown below, each time the SCOPE key is presse

41、d. Graphic equalizer displayReal-time audio scope display Illustrates the values of the currently selected 9-band graphic equalizer. Microphone audio input displayed in an 18-band spectrum, from 44.2Hz to 16kHz. Graphic equalizer adjustment knobs The output signals of both the condenser microphone a

42、nd the dynamic microphone can each be adjusted in 9 frequency bands to achieve the de- sired sound. r Use the included dedicated adjustment tool to turn each adjustment knob. r The 9 adjustable frequency bands are listed below. 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz,16 kHz Bass Tr

43、eble r Settings emphasizing the low range are factory preset into memory 1, Settings emphasizing the high range are factory preset into memory 2. Memory 1Memory 2 7 Controls & Connections M-1 Operating Manual Adjusting 1. Press the SCOPE key to enable the graphic equalizer display mode. r The SCOPE

44、key LED is OFF while the graphic equalizer mode is displayed. 2. Press the number 1 or 2 key to select the desired memory. Condenser microphone memory Dynamic microphone memory r The selected memory number will be illuminated in blue. 3. Turn the graphic equalizer setting knobs below the display, using the included adjustment tool. Fine-tune each individual audio band to the desired sound quality. Graphic equalizer setting knobs BassTreble r The 9 frequency bands can be adjusted in