rx321.pdf
《rx321.pdf》由会员分享,可在线阅读,更多相关《rx321.pdf(23页珍藏版)》请在收音机爱好者资料库上搜索。
1、This obsolete manual file is provided as a courtesy to you by Ten-Tec, Inc. Ten-Tecs service department can repair and service virtually everything we have built going back to our first transceivers in the late 1960s. It is our ability to continue offering service on these rigs that has led to their
2、 re-sale value remaining high and has made a major contribution to our legendary service reputation. Printed and bound copies of all manuals are available for purchase through our service department if you would prefer not to use this copy as your transceiver manual. We can repair or service your Te
3、n-Tec equipment at our facility in Sevierville, TN. We also offer support via telephone for all products via during usual business hours of 8 a.m. to 5 p.m. USA Eastern time, Monday through Friday. We have a large supply of parts for obsolete products. Repairing a transceiver or amplifier yourself?
4、Contact us for parts pricing information. Service department direct line: (865) 428-0364 Ten-Tec office line: (865) 453-7172 Service department email: Address: 1185 Dolly Parton Parkway, Sevierville, TN 37862 USA We have found it is most effective for us to help you troubleshoot or repair equipment
5、with a consultation via telephone rather than by email. Suggested contact methods are: Troubleshooting or repairing equipment call (865) 428-0364 Other inquiries call (865) 428-0364 or email THANK YOU AND 73 FROM ALL OF US AT TEN-TEC Downloaded from www.M manuals search engine RX-321 DSP Receiver Te
6、n-Tec, Inc 1185 Dolly Parton Parkway Sevierville, TN 37862 Copyright Ten-Tec Incorporated Downloaded from www.M manuals search engine Rx-321 Receiver The RX-321 receiver was deisgned by Ten-Tec for OEM applications. It was manufactured by Ten-Tec under agreement with third parties and never produced
7、 with the Ten-Tec brand name. The RX-321 is based on the RX-320D receiver. Addional circuitry to support integration with a transmitter was added, along with an RF preselector and 600 Ohm audio output. GENERAL DESCRIPTION The Rx-321 is a general coverage receiver capable of receiving AM, SSB, and CW
8、 signals from 100kHz to 30MHz. The receiver is controlled by an external computer via a serial connection (see to download the Rx-320D PC-GUI and programmers reference guide which will provide more information on controlling and programming the Rx-321). The Rx-321 is powered from any DC power supply
9、 operating in the range of 12-28VDC and capable of supplying at least 800mA of current (please observe the correct polarity as shown on rear panel). The antenna connection is designed for a 50-ohm antenna and is an SO239 type connector. The speaker connection is also available on the rear panel and
10、is clearly marked. Please connect a 4 to 8 ohm speaker (again, please observe the correct polarity as shown). Finally, there is also a 9-pin connector on the rear panel labeled REMOTE. This connector provides an optional 600- ohm audio output and a mute pin that allows the AGC circuit to be turned o
11、ff when used with an external transmitter (this keeps the external transmitter from loading up the AGC and causing receive recovery problems). Please see the schematic description of the 9-pin connector labeled remote for the pin out of this connector and DC voltage levels to apply to the mute pin w
12、hen using an external transmitter. SCHEMATIC DESCRIPTION The receive signals from the antenna pass through one of eight preselector filters that are selected based on the band in which the receiver is tuned. From there, the selected signals go through a preamp stage before passing through an IF notc
13、h filter and on to the first mixer. The first mixer translates the tuned signal to 45MHz. The 45MHz signal then passes through a 45MHz IF filter and gain stage before going to the second mixer. The second mixer translates the signal to 455kHz. The 455kHz signal then pass through a 455kHz IF filter a
14、nd gain stage before going to the third mixer. The third mixer translates the signal to 12kHz where the signal is then passed on to the AD1847 codec and ADSP- 2101 DSP processor for decoding and translating to a low-level audio signal. The low level audio signal is then passed on to an audio amplifi
15、er which amplifies the signal and passes it on to the external speaker connector provided at the rear panel. An external speaker can be connected and the received signal can be heard. Copyright Ten-Tec Incorporated Downloaded from www.M manuals search engine Copyright Ten-Tec Incorporated Copyright
16、Ten-Tec Incorporated Downloaded from www.M manuals search engine Copyright Ten-Tec Incorporated Copyright Ten-Tec Incorporated Downloaded from www.M manuals search engine Copyright Ten-Tec Incorporated Downloaded from www.M manuals search engine Copyright Ten-Tec Incorporated Downloaded from www.M m
17、anuals search engine Copyright Ten-Tec Incorporated Copyright Ten-Tec Incorporated Downloaded from www.M manuals search engine Copyright Ten-Tec Incorporated Copyright Ten-Tec Incorporated Downloaded from www.M manuals search engine Copyright Ten-Tec Incorporated Copyright Ten-Tec Incorporated Downl
18、oaded from www.M manuals search engine So sit back in your chair and relax. The Omni-VII not only has top of the line receiver performance and everything else you need in a high-end tranceiver - its also very easy to use. Spend your time on the air instead of reading the operators manual. For comple
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- rx321
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


