Anritsu MS4661_4662 电路图.pdf

《Anritsu MS4661_4662 电路图.pdf》由会员分享，可在线阅读，更多相关《Anritsu MS4661_4662 电路图.pdf（5页珍藏版）》请在收音机爱好者资料库上搜索。

1、For product ordering information, see pages 4-213 NETWORK ANALYZERS 3 For Measuring Transmission/Reflection and S-Parameter NETWORK ANALYZER MS4661A/E, MS4662A 100 kHz to 3 GHz PTA GPIB The MS4661A/E include a built-in transmission/reflection measure- ment test set (bridge), making them ideal for me

2、asuring antennas and passive devices (filters, attenuators, switches, cables) where the input and output impedances are nearly equal. The MS4662A also has an S-parameter test set. In addition to measuring active devices with dif- ferent input and output characteristics (such as amplifiers), it mea-

3、sures forward and reverse direction characteristics with a single con- nection. You can choose the model best suited to your application. The MS4661A and MS4662A has color LCD displays, while the MS4661E has an EL display (monochrome). The high-speed synthesizer and DSP (digital signal processor) pe

4、r- mit measurements at 400 s/point (or 600 s/point using two-port cal- ibration), with sweep times approximating real-time measurement. Post-measurement data analysis is facilitated by unique functions such as limit tests, 3 dB bandwidth searches, and ripple searches for device evaluation and pass/f

5、ail identification. With PTA (Personal Test Automation) capability as standard, it is easy to configure ATE (Automated Test Equipment) systems. Features Built-in transmission/reflection measurement, and S-parameter test set Full range of limit test functions for real-time pass/fail testing One-touch

6、 measurement of each characteristic using target data search function Time domain analysis Application examples Measurement of cable fault locations Time-domain function permits measurement of distances to cable faults and impedance mismatch points. Simultaneous measurement of amplifier forward/reve

7、rse direction transmission (MS4662A) The S-parameter test set in the MS4662A allows you simultaneous measurement of forward and reverse direction device characteristics. Custom-made product RadioFans.CN 收音机爱 好者资料库 NETWORK ANALYZERS For product ordering information, see pages 4-7. Measurement Frequen

8、cy Measurement items Display Display format Resolution Frequency accuracy Range Internal reference oscillator S parameter: S11, S21 Level characteristics: R, TA, TB Group delay characteristics: GPDLY (any aperture) Time domain characteristics: displays impulse and step response of above characterist

9、ics S11: LOG MAG, PHASE, LIN MAG, REAL IMAG, POLAR (M/P), VSWR, IMPD (ZPHASE, Q/D, RS/CS, LS, R+jX), ADMT (YPHASE, Q/D, RP/CP, LP, G+jB) S21: LOG MAG, PHASE, LIN MAG, REAL IMAG, POLAR (M/P), HSDLY GPDLY: REAL LEVEL: LOG MAG Time domain (band pass, low pass, impulse/step response): LOG MAG, PHASE, LI

10、N MAG, REAL, IMAG S parameter: S11, S21, S12, S22 Level characteristics: R, TA, TB Time domain characteristics: displays impulse and step response of above characteristics S11/S22: LOG MAG, PHASE, LIN MAG, REAL IMAG, POLAR (M/P), VSWR, IMPD (ZPHASE, Q/D, RS/CS, LS, R+jX), ADMT (YPHASE, Q/D, RP/CP, L

11、P, G+jB) S21/S12: LOG MAG, PHASE, LIN MAG, REAL IMAG, POLAR (M/P), HSDLY LEVEL: LOG MAG Time domain (band pass, low pass, impulse/step response): LOG MAG, PHASE, LIN MAG, REAL, IMAG Model Filter pass/fail judgment using limit tests The segment limit test permits pass/fail testing for complex charac-

12、 teristics with subtle fluctuations in slope not detected as ripples. Filter analysis using target data search This function is useful in filter 3 dB bandwidth measurements and ripple searches. Specifications MS4661A/E 1 to 2 screens (front/back, split) 100 kHz to 3 GHz Minimum resolution: 0.1 Hz Sa

13、me as internal reference oscillator Standard Aging rate: 1 x 106/day (compared to after 15 minutes warm-up) Temperature characteristics: 5 x 106(0 to 50C) Option 01 Aging rate: 2 x 108/day (compared to after 24 hours warm-up) Temperature characteristics: 5 x 108(0 to 50C) MS4662A Continued on next p

14、age SAW filter measurement with time gate function Time domain gate function is very useful for eliminating test fixture leakage signals. RadioFans.CN 收音机爱 好者资料库 For product ordering information, see pages 4-215 NETWORK ANALYZERS 3 Test port output characteristics Aperture frequency fixed mode (GPDL

15、Y): delay range (DRG); 40 ns to 400 ms (1-2-4 sequence, aperture frequency = 0.4/DRG) Aperture frequency free mode (GPDLY): 1 Hz (correspond to 400 ms) to 400 MHz (correspond to 1 ns) High-speed mode (HSDLY): = /(360 x aperture frequency) : phase measurement range, aperture frequency = SPAN x smooth

16、ing aperture (%). Smoothing aperture can be set between 20 to 2/MEP x 100 (%). 2.78 x 105/aperture frequency, DRG/14400 when set by DRG Phase measurement dynamic accuracy/(360 x aperture frequency) Test port level (input) 10 to 0 dB 0 to 40 dB 40 to 50 dB 50 to 60 dB 60 to 70 dB 70 to 80 dB 80 to 90

17、 dB 6.0 1.0 GHz Measurement accuracy 0.3 0.3 0.8 2.0 6.0 20 6.0 1.0 GHz 0.3 0.8 2.0 6.0 20 Test port level (input) +10 to 0 dB 0 to 40 dB 40 to 50 dB 50 to 60 dB 60 to 70 dB 70 to 80 dB 80 to 90 dB 0.30 dB 1.0 GHz Measurement accuracy 0.05 dB 0.05 dB 0.10 dB 0.30 dB 1.20 dB 4.00 dB 0.30 dB 1.0 GHz 0

18、.05 dB 0.10 dB 0.30 dB 1.20 dB 4.00 dB Measurement accuracy Compared to 10 dBm at test port level, RBW: 10 Hz) Dynamic accuracy Measurement range Display resolution Dynamic accuracy 180(resolution: 0.001) 0.01/div to 50/div (1-2-5 sequence) Measurement accuracy Compared to 10 dBm at test port level,

19、 RBW: 10 Hz) Frequency 100 to 500 kHz 500 kHz to 2 GHz 2 to 3 GHz Deviation 0.5 to +2.5 dB 1.5 to +1.5 dB 2.0 to +2.0 dB Frequency 100 to 500 kHz 500 kHz to 2 GHz 2 to 3 GHz Deviation 0.5 to +2.5 dB 1.5 to +1.5 dB 2.0 to +2.0 dB GPC-7 +20 dBm, DC 40 V (AC couple) 90 dBm (100 kHz to 80 MHz, RBW: 1 kH

20、z) 80 dBm (80 MHz to 3 GHz, RBW: 1 kHz) 0 dB, 20 dB (switching error: 1 dB) Range: 70 to +10 dBm Accuracy: 1.0 dB (100 MHz, 0 dBm) Linearity: 0.5 dB (10 to +8 dBm, compared to 100 MHz/0 dBm) Resolution: 0.01 dB Output level deviation: Compared to 100 MHz/0 dBm Signal purity Test port connector Frequ

21、ency RBW Maximum input level Average noise level Crosstalk Measurement range Display resolution SSB phase noise (offset frequency: 10 kHz): 90 dBc/Hz (100 kHz to 80 MHz), 85 dBc/Hz (80 MHz to 1 GHz), 80 dBc/Hz (1 to 3 GHz) Non-harmonic spurious: 30 dBc (output level: 0 dBm) Harmonic distortion: 25 d

22、Bc (output level: 0 dBm) N-J 100 kHz to 3 GHz 0 dBm (DC couple) Measurement of transmission characteristics (S21, TB): 90 dBm (100 kHz to 80 MHz, RBW: 1 kHz), 80 dBm (80 MHz to 3 GHz, RBW: 1 kHz) Measurement of reflection characteristics (S11, TA): 70 dBm (100 kHz to 80 MHz, RBW: 1 kHz), 90 dB (100

23、kHz to 1 GHz)*, 80 dB (1 to 3 GHz)* *Improved to 105 dB by calibration 100 dB (resolution: 0.001 dB) 0.01 dB/div to 50 dB/div (1-2-5 sequence) Range: 10 to +10 dBm Accuracy: 1.0 dB (100 MHz, 0 dBm) Linearity: 0.5 dB (10 to +10dBm, compared to 100 MHz/0 dBm) Resolution: 0.01 dB Output level deviation

24、: Compared to 100 MHz/0 dBm Model Impedance Output level MS4661A/EMS4662A 50 Test port input characteristics Magnitude measurement Phase measurement Group delay measurement Test port attenuator Measurement range Resolution Dynamic accuracy 3 Hz to 10 kHz (1-3 sequence), AUTO (auto-setting with sweep

25、 time) Continued on next page RadioFans.CN 收音机爱 好者资料库 NETWORK ANALYZERS For product ordering information, see pages 4-7. ModelMS4661A/EMS4662A 30 dB (300 kHz to 3 GHz), 22 dB (100 to 300 kHz) 15 dB (300 kHz to 1.5 GHz) 10 dB (100 kHz to 3 GHz) 10 dB (300 kHz to 1.5 GHz) 8 dB (100 kHz to 3 GHz) 25 dB

26、 (300 kHz to 1.5 GHz) 22 dB (100 kHz to 3 GHz) 15 dB (300 kHz to 1.5 GHz) 10 dB (100 kHz to 3 GHz) 2 dB (300 kHz to 80 MHz), 5 dB (100 kHz to 3 GHz) 2 dB (300 kHz to 80 MHz), 90 dB (100 kHz to 1 GHz), 80 dB (1 to 3 GHz) EMC*1 ModelMS4661A/E Impulse/step response Frequency response, 1-port OSL, 1-pas

27、s 2-portsFrequency response, 1-port OSL, full 2-ports, 1-path 2-ports MS4661A: 640 x 400 dots, 8.9 inch color LCD MS4661E: 640 x 400 dots, 8.9 inch EL 640 x 400 dots, 8.9 inch color LCD MS4662A Input waveform analysis Filtering Time domain range Range resolution Windows Gating Frequency sweep Level

28、sweep Sweep time Number of measuring points Sweep function Multi-marker Frequency marker Marker function Target data search Display Calculation Auto-scale Time display TD measurement Sweep Marker Calibration method Reference plane extend Display Hard copy Data storage Measurement data memory Interna

29、l computer Auxiliary input and output Power Dimensions and mass Operating temperature range Safety EN55011: 1991, Group 1, Class A EN50082-1: 1992 Band pass (LOG/LIN MAG, PHASE, REAL, IMAG), low pass (LOG/LIN MAG, PHASE, REAL, IMAG) (numbers of measuring points in frequency domain 1) ns Frequency sp

30、an width (GHz) Time span/(number of measuring points 1) RECTANGULAR, NOMINAL, LOW SIDELOBE, MIN SIDELOBE Frequency response of specified range measurable after gate specification in time-domain LIN: CENTER/SPAN, START/STOP, LOG: START/STOP LIN: START/STOP/STEP 10 ms to 27.5 h (differs with measureme

31、nt items, number of measuring points, RBW, display condition) 11, 21, 51, 101, 251, 501, 1001 points (display: 501 points) Sweep range: Full, part, listed-frequency Sweep control: REPEAT, SINGLE, STOP/CONT Up to 10 independent markers set for each trace (independent/linked setting possible) Marker p

32、osition settable at frequency NORMAL MKR, MKR, 0 MKR, MKR MAX, MKR MIN, MKR CF, MKR SPAN, MKR OFFSET, MKR +PEAK, MKR PEAK, MKR TRACK +PEAK, MKR TRACK PEAK OFF, MIN, MAX, P-P, MEAN, , 1st +PEAK, 1st PEAK, NEXT +PEAK, NEXT PEAK, 1 dB COMP, XdB BW, XdB FREQ, Ripple 1, Ripple 2, Ripple 3, Ripple 4 Elect

33、rical length can be corrected. Range: 0 to 999999.9999999 m, Resolution: 100 nm Complex number input/output of (+, , x, ), SUM, DIFF, conjugate complex number operation A/B trace independently settable Year, month, date, time (display and settable) Video plotter: Hard copy at video plotter using sep

34、arate video output Direct plot: Hard copy at printer or plotter (HP-GL, GP-GL) via GPIB Following data saved to or recalled from PMC or floppy disk (external FDD required): Measurement condition/ calibration data (max. 10 items), PTA application program Following measurement data saved as display an

35、d complex data in same memory as measurement setup, etc.: Trace A memory (XMA), trace B memory (XMB), trace A sub-memory (SMA), trace B sub-memory (SMB) PTA Reference oscillator input: 10 MHz 10 Hz, TTL level, BNC-J connector Reference oscillator buffer output: 10 MHz, TTL level, BNC-J connector GPI

36、B: meets IEEE-488 (24-pole connector) I/O ports: PTA- parallel input/output Module bus: for external module control Video output: separate video output (DIN-type, 8-pole), digital RBG output (Dsub-type, 9-pole) 85 to 132 Vac/170 to 250 Vac, 220 VA 426 (W) x 222 (H) x 450 (D) mm, 24 kg 0 to 50C Direc

37、tivity*1 Source match Load match Transmission frequency response Reflection frequency response Crosstalk *1: Electromagnetic Compatibility Test port characteristics Test port characteristics (pre-calibration) *1: 23 to 35C EN61010-1: 1993 (Installation Category , Pollution Degree ) For product order

38、ing information, see pages 4-217 NETWORK ANALYZERS 3 Model/Order No.Name Model Connector Directivity Source match Load match Transmission frequency response Reflection frequency response Crosstalk MS4661A/E*3MS4662A Main frame MS4661A*Network Analyzer (color LCD, built-in bridge) MS4661E*Network Ana

39、lyzer (EL display, built-in bridge) MS4662A*Network Analyzer (color LCD, built-in S-parameter) Standard accessories E001Power cord, 2.5 m:1 pc F0014Fuse, 6.3 A:1 pc F0043Fuse, 1 A (MS4662A only):2 pcs Z0280AList band (MS4662A only):1 pc W0996AEMS4661A/E operation manual (MS4661A/E only):1 copy W0997

40、AEMS4662A operation manual (MS4662A only):1 copy W0998AEGPIB operation manual:1 copy W0999AEPTA operation manual:1 copy Option MS4661/4662-01High stability reference oscillator (aging rate: 2 x 108/day) Optional accessories 3750SMA/3.5 mm calibration kit (open, short, termination, 7 mm-3.5 adapter)

41、37517 mm calibration kit (open, short, termination) 375350 , N-type calibration kit (open, short, termination, 7 mm-N adapter) 3753-7575 , N-type calibration kit (open, short, termination, N-N adapter) J0629Test port cable (GPC-7 at both ends, 60 cm) J0729ATest port cable (N-M at both ends, 60 cm) J

42、0730ATest port cable (3.5 mm-M at both ends, 60 cm) 34AS50Adapter (GPC-7 WSMA-M) 34ASF50Adapter (GPC-7 WSMA-F) 34AN50Adapter (GPC-7 N-M) 34ANF50Adapter (GPC-7 N-F) 1091-26Adapter (N-M SMA-M) 1091-27Adapter (N-M SMA-F) 1091-80Adapter (N-F SMA-M) 1091-81Adapter (N-F SMA-F) K220Adapter (K-M K-M, SMA co

43、mpatible) K222Adapter (K-F K-F, SMA compatible) K224Adapter (K-M K-F, SMA compatible) 12N75BMatching pad (50 75 , N-M N-M) P0005Memory card (32 KB SRAM) P0006Memory card (64 KB SRAM) P0007Memory card (128 KB SRAM) P0008Memory card (256 KB SRAM) P0009Memory card (512 KB SRAM) MC3305AJIS Type PTA Keyb

44、oard MC3306AASCII Type PTA Keyboard J0007GPIB cable, 1 m J0008GPIB cable, 2 m B0329DFront cover (1MW 5U) B0333DRack mount kit B0334DCarrying case (hard type) Peripheral instruments VP870Printer (GPIB, EPSON) Test port characteristics (typical values after 2-port OSL calibration*2) N 38 dB 35 dB 25 d

45、B (300 kHz to 1.5 GHz) 22 dB (100 kHz to 3 GHz) 0.02 dB 0.02 dB 105 dB 3.5 mm (SMA) 38 dB 35 dB 35 dB 0.02 dB 0.02 dB 105 dB *2: Typical values are for reference, they are not guaranteed. *3: 1-pass 2-port calibration Ordering information Please specify model/order number, name, and quantity when ordering. *: Custom-made product