Yaesu_FP-1030A_user.pdf

《Yaesu_FP-1030A_user.pdf》由会员分享，可在线阅读，更多相关《Yaesu_FP-1030A_user.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、OPERATING INSTRUCTION FP-1030A REGULATED DC POWER SUPPLY IIITROIIUGTIOII The Yaesu FP-10304 is a high-quality, Regulated DC Power Supply specifically designed for use with DC pow- ered radio equipment. The FP-l0304 provides 13.8 Volts DC at up to 25 Amps (continuous duty). Please read these operatin

2、g instructions thoroughly so as to ensure proper installation and utilization of this unit. We recommend that these instructions be kept perma- nently for your future reference. Features f Overload Protection A current foldback circuit is utilized to prevent dam- age to the unit from excessive curre

3、nt drain. An Over- load indicator becomes illuminated when an over- load condition exists. Note: Should the overload protection circuitry be ac- tivated, switch off the power supply and disconnect the external equipment immediately. Extended operation under overload conditions may eventually cause d

4、amage to the power supply. f High RFI lmmunity The FP-1030,4 is specifically designed for use with radio communication equipment. It therefore includes extensive filtering to provide high immunity from erratic operation which might be caused by Radio Frequency interference (RFl). ll Multiple DC Outp

5、ut connections Besides the two pairs of (64) snap-in DC connec- tions and the (25A) screw-on DC output terminal, the FP-10304 features a cigar-lighter type DC output jack for radio equipment equipped with a hatching cigar- lighter plug. Note: Do not attempt to use a cigar lighter in this DC output p

6、ort, as it is not designed for this application, and damage to the power supply may result. VERTEX STANDARD CO., LTD. 4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan VERTEX STANDARD fr?lff,*H:rfi-,n i.*1, ;,.1, 1., uu, . o YAESU EUROPE B.V. P.O. Box 75525 11 18 ZN Schiphol. The Netherlands YAESU

7、UK LTD. Unit 12, Sun Valley Business Park, Winnall Close Winchester, Hampshire, SO23 0LB, U.K. YAESU GERMANY GmbH Am Kronberger Hang 2, D-65824 Schwalbach, Germany VERTEX STANDARD HK LTD. Unit 5, 20lF , Seaview Centre, 139-141 Hoi Bun Road lnstallation IiRs Like any electronic apparatus, the FP-l030

8、4 should be installed in a location which allows free air circulation, so as to provide efficient cooling for the power supply cir- cuitry, The FP-103OAsfiould not be installed in locations exposed to moisture, as a significant electric shock haz- ard will exist. We recommend that this unit not be i

9、nstalled in extremely hot, dusty, or humid locations, nor in areas exposed to direct sunshine. Gonnections and 0lelation t Confirm that the AC voltage as indicated on the rear panel label matches the AC mains voltage in your area. fl Connect a good earth ground to the GND terminal on the bottom case

10、, using a heavy, braided cable for con- nection to your main station ground system. t Be sure the FP-1030A is turned OFF, then plug the AC cable into your stations wall outlet. t Confirm the expected current drain for the radio(s) to be connected to the FP-1030,4. The two pairs of snap- in terminals

11、 can only handle a combined current of 6 Amps, while the screw-on terminal can provide up to 25 Amps. t Connect each radios Negative (usually Black) DC cable to the appropriate Black (-) terminal on the FP- 1030A, and connect each radios Positive (usually Red) DC cable to the appropriate Red (+) ter

12、minal. f Turn the FP-10304 ON first, then turn on the radio(s) connected to the power supply, Operation may now com mence. f When operation is completed, turn the radio (s) OFF first, then turn off the power supply. A Gaution t Do not Exceed the total current rating for this power supply. This unit

13、is designed to provide a maximum aggregate current of 25 Amps (total of all output ter- minals), Also, do not exceed a total current; drain of 6 Amps (combined) from the two pairs of snap-in out- put terminals. t Do not use this power supply for any purpose other than powering radio communication eq

14、uipment. lt is not designed for other purposes such as battery charging, cigarette lighting, powering of motorized equipment, nor for lamps (other than the incidental lamps inside radio equipment). f lf the AC input fuse should blow determine the cause of the failure before replacing the fuse. When

15、replac- ing fuses, use only the specified size for the AC volt- age in use. Satcty Precautions The following common-sense precautions must be ob- served to help prevent possibly-fatal electric shock. n NEVER remove the metal cover of the power supply while AC power is connected. -l NEVER touch the p

16、ower supply when your hands are wet. ll NEVER operate the power supply if foreign materials such as metallic objects, water, or other debris have fallen inside. Contact your Yaesu Dealer for assis- tance regarding inspection and/or repair of your unit. t Never operate a unit which has been damaged,

17、as the voltage regulation circuitry may have been dis- abled. The resulting high DC voltage could cause damage to your radio equipment. f Never allow foreign objects to touch the DC Power Output terminals. fl lf you have the need to inspect the interior of the power supply, be certain to let it cool

18、 off completely, as some components may be hot enough to burn your hands in the event of component failure. Panel Comonent$ O POWER SWITCH When the FP-10304 is turned on, the indicator above the Power switch lights up. tZ,r METER C Both Current ( A ) and OutputVoltage ( V ) may be monitored simultan

19、eously. OVERLOAD INDTCATOR This indicator lights up when the Overload Protec- tion circuitry is activated due to improper operating conditions. (4 CttO TERMINAL This terminal is located on the bottom case, and should be connected to a good earth ground using a heavy, braided cable (not supplied). ou

20、rpuT TERMTNAL (25A) This is the high-capacity (25A) output terminal. The Red terminal is positive 1+), and the Black ter- minal is negative (-) oc PowER socKET (10A) This is a cigar-lighter type socket, capable of supply- ing up to 10 Amps of current (negative ground only). (D ourpur TERMTNALS (6A)

21、These two pairs of snap-in output terminals can pro- vide up to 6 Amps maximum current (combined). The Red terminals are positive (+) and the Black ter- minals are negative (-). MAX 25A This equipment complies with the follow- ing standards. EMC Directive B9/336/EEC EN 55011 : 1991 EN 50082-1 (rEC 8

22、01-2) .1992 EN 50082-1 (rEC 801-3) .1992 EN 50082-1 (rEC 801-4) 1992 LVD 73I23IEEC EN 60065: 1993 YNAU o SRecificafions VOLTAGE TYPEAC 120V I AC 230V I AC 240V RATED VOLTAGE RANGEt7o/o OUTPUT VOLTAGE13.8V DC (F|XED) OUTPUT CURRENT25 A CONTINUOUS OVERLOAD PROTECTION27A RIPPLE VOLTAGEBETTER THAN 3mVp-p AT 13.8V, 25 A COOLING SYSTEMTHERMOSTATICALLY-CONTROLLED COOLING FAN CIRCUIT TYPELINEAR SERIES AC INPUT FUSE8A 5A WEIGHTe.5 ks (20.9 LBS) DIMENSIONS:250 (W) x 150 (H) x 240 (D) mm (9.8 x 5.9 x 9.5)Illlllilllllllillililtilil1lililililtililtililrilililrl