Anritsu HFE0104_TechRept 电路图.pdf

《Anritsu HFE0104_TechRept 电路图.pdf》由会员分享，可在线阅读，更多相关《Anritsu HFE0104_TechRept 电路图.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、36High Frequency ElectronicsFrom January 2004 High Frequency Electronics Copyright Summit Technical Media, LLC T his report offers a brief summary of some recent activities in wireless system standards. The standards process is continuouseven estab- lished standards are updated and modified in respo

2、nse to changes in technology and marketplace. It is impos- sible to collect comprehensive data on all standards. This update is just a snapshot of a few standards we think are of current interest to our readers. IEEE 802.15.4 WPAN Standard IEEE 802.15.4 is the IEEE standard, covering Wireless Person

3、al Area Networks (WPAN), which was approved and published in late 2003. It defines a phys- ical layer (PHY) and media access controller (MAC) for applications in home networking, automotive net- works, industrial networks, interactive toys and remote metering. The standard provides for data rates of

4、 250 kbps, 40 kbps and 20 kbps in a star or peer-to-peer configu- ration. It has dynamic device addressing and a fully handshaked protocol for transfer reliability. Frequency bands are 16 channels in the 2.4 GHz ISM band, 10 channels in the 915 MHz ISM band and one channel in the European 868 MHz ba

5、nd. Key attributes of 802.15.4 include: 2.4 GHz PHY 250 kbps (4 bits/symbol, 62.5 ksymbols/s) Data modulation is 16-ary orthogonal modulation 16 symbols are orthogonal set of 32-chip PN codes Chip modulation is O-QPSK at 2.0 Mchips/s 868 MHz/915 MHz PHY Symbol Rate 868 MHz Band: 20 kbps (1 bit/symbo

6、l, 20 ksymbols/s) 915 MHz Band: 40 kbps (1 bit/symbol, 40 ksymbols/s) Data modulation is BPSK with differential encoding Spreading code: a 15-chip m-sequence Chip modulation is BPSK: 868 MHz Band: 300 kchips/s 915 MHz Band: 600 kchips/s Transmit Power: at least 0.5 mW Transmit Center Frequency Toler

7、ance: 40 ppm Receiver Sensitivity (Packet Error Rate 1%): -85 dBm 2.4 GHz band -92 dBm 868/915 MHz band This standard is designed for very low power con- sumption, low cost and complexity, but with reliable data transfer. The specific implementations may vary from intermittent data (e.g. an applianc

8、e on/off con- troller) to continuous, but low rate data (e.g. a cordless mouse or a periodically polled sensor). The application areas of 802.15.4 overlap with Bluetooth, Zigbee, Home RF and other short-range wireless data transmission systems. The differences with Bluetooth are often described as m

9、arket-basedBluetooth products are mainly tar- geted to individual users, operating primarily in con- junction with cellular handsets, personal computers and PDAs. 802.15.4 is intended for a wider range of applications, including both larger networks and inter- facing with devices that are not part o

10、f existing net- works or systems. Zigbee is designed for even lower power consump- tion and lower cost implementation. It also is designed for less flexible operation, emphasizing master-slave relationships in an environment such as an in-build- ing HVAC control system. As part of the cost-savings,

11、Zigbee specifies direct sequence spread spectrum (DSSS) rather than 802.15.4s frequency hopping (FHSS). 802.15.4 allows for data rates two to four times higher than Zigbees 128 kbps. The IEEE WPAN standard establishes a means for short-range wireless communications with the inter- operability necess

12、ary for marketplace acceptance, with more flexibility than other standards that are focused on a narrower range of applications. At least eight chip makers have announced prod- ucts compliant with 802.15.4, which should encourage hardware developers to proceed with their planned short-range data pro

13、ducts. TECHNOLOGY REPORT An Update on Wireless Standards Activity RadioFans.CN 收音机爱 好者资料库 38High Frequency Electronics Ultra Wideband (UWB) One of the points of contention among proponents of various ultra wideband transmission standards is the use of orthogonal frequency domain modulation (OFDM). I

14、EEE standard 802.15.3a for multiband OFDM (MB-OFDM) was released as a draft specifica- tion in November 2003. Multi-Band OFDM Alliance (MBOA), a UWB industry group, has stated that they will generate specifications based on the IEEE proposal, as version 0.9 in February 2004 and 1.0 in May 2004. Alth

15、ough the MBOA supports the IEEE process, it will be work- ing in parallel to help speed time-to-market. The MBOA has nearly one hundred engineers from about 30 companies working within 8 technical subcommit- tees to define the specification. There is concern that an OFDM-based standard would not com

16、ply with FCC regulations. Xtreme Spectrum, one of the pioneers in UWB development also has a proposal for the 802.15.3a wireless net- working standard. The Xtreme Spectrum proposal uses a direct sequence code division multiple access (DS-CDMA) approach. To avoid another area of con- cernIP licensing

17、Xtreme has said that it will offer “reasonable and non-discriminatory zero licensing” (RAND-Z) access to its intellectual property (IP) rele- vant to the standard. 802.16 Wireless Broadband The 802.16 metropolitan area network (MAN) standard was released in april 2003, but continues to draw interest

18、 in product and system development, as well draw controversy on its role in the wireless land- scape that also includes 802.11 technologies. Current activities include draft releases of updates and amendments for the air interface, PHY and MAC layer details for the lower frequencies (2 to 11 GHz), p

19、lus protocol conformance and test suite definitions for the higher frequencies (10-66 GHz). 802.16 has evolved greatly from its initial 1999 focus on local multipoint distribution service (LMDS). It now includes features that overlap and/or comple- ment portions of the 802.11 standard.For the under-

20、11 GHz range, 802.16 can be characterized as “broadband wireless” that is aimed at infrastructure applications rather than the “last 100 feet” of 802.11 WLAN. The overlap occurs in applications where 802.16 is designed to the home rather than as a backbone with 802.11 as the individual access format

21、. The 802.16a standard specifies three physical lay- ers for services: a single-carrier access method for spe- cial-purpose networks; a 256-carrier orthogonal fre- quency division multiplexed (OFDM) multicarrier PHY for mainstream applications; and a special OFDMa with 2,048 carriers, which can be u

22、sed for selective multicast applications, and advanced multi- plexing options. The 802.16 Task Group C for 10- to 66-GHz fre- quency ranges continues to work on higher-frequency services evolving from LMDS and point-to-point 50- to 60-GHz radio. After some well-publicized failures of early LMDS effo

23、rts, 802-16-based broadband wireless access (BWA) is again starting to grow in investment and public awareness. Some 802.11-based wireless access providers have been sufficiently successful to be considered small-scale examples of the kind of service that BWA can provide where cable and DSL are not

24、presently available. 802.16-based systems are getting lots of interna- tional attention. As with cellular telephony, the lack of wired infrastructure in many parts of the world cre- ates potential markets for wireless distribution. China, Korea, Russia and several Eastern European countries have bee

25、n mentioned as key places with an interest in wireless broadband distribution. Digital Television in Europe In conjunction with ETSI, CENELEC is undertak- ing the process of defining further standardization in interactive digital television. As directed by the European Commission, working groups hav

26、e been identifying existing standardization initiatives at international, European and national levels, both for- mal and informal, and identifying gaps requiring fur- ther standardization work. Under its Framework Directive 2002/21/EC, the EU has laid down a tight timescale for the Commission to re

27、view the interoper- ability of digital TV interactive services. Following a consultation document scheduled for publication in December 2003, the Commission is due to deliver a for- mal assessment of the state of play regarding interop- erability no later than July 2004. CENELEC Adds New Members Coi

28、nciding with the beginning of a new year, CEN- ELEC now has four new members. The National Electrotechnical Committees of Estonia, Latvia, Poland and Slovenia joined CENELEC on this date. These four countries join now a list that includes the Czech Republic (member since 1997), Malta (2001) Hungary

29、and Slovakia (2002) and Lithuania (2003), completing the enlargement to the East even before the target date. With the four newcomers, CENELEC will reach 27 members. One of the consequences of the enlargement will be the adoption, also from January 1st 2004, of the weighted votes agreed by the European Union in the Treaty of Nice. CENELEC hopes and expects Cyprus to become the 28th member before May 2004, completing this way the objectives set out by the European Commission. TECHNOLOGY REPORT RadioFans.CN 收音机爱 好者资料库