BOONTON 4530 Series 4531, 4532 Instruction 电路图.pdf

《BOONTON 4530 Series 4531, 4532 Instruction 电路图.pdf》由会员分享，可在线阅读，更多相关《BOONTON 4530 Series 4531, 4532 Instruction 电路图.pdf（168页珍藏版）》请在收音机爱好者资料库上搜索。

1、4530 SERIES RF POWER METER INSTRUCTION MANUAL This manual is applicable to:Revision date: 11/26/2002Revision date: 11/26/2002 Manual P/N: 98404800C ersions: 20021119 and later*CD P/N: 98404899C Instrument serial numbers: ALL*Manual P/N: 98404800C Operating Firmware Versions: 20021119 and later*CD P/

2、N: 98404899C *earlier firmware may not contain all capabilities listed herein BOONTON ELECTRONICSWeb Site: A subsidiary of Noise/Com - A Wireless Telecom Group CompanyEmail: 25 Eastmans RoadTelephone: 973-386-9696 Parsippany, NJ 07054-0465Fax: 973-386-9191 ? RadioFans.CN 收音机爱 好者资料库 ? 1998-2001, 2002

3、 Boonton Electronics. All rights reserved. ?is a registered trademark of Boonton Electronics, a subidiary of Noise/Com, a Wireless Telecom Group Company Boonton Electronics 25 Eastmans Road Parsippany, NJ 07054-0465 Information contained in this manual is subject to change without notice. Boonton El

4、ectronics makes no warranty of any kind with regard to this material, including, but not limited to, the implied warraties of merchantability and fitness for a particular purpose. Boonton Electronics shall not be liable for errors contained herein or for incidental or consequential damages in connec

5、tion with the furnishings, performance, or use of this material. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Boonton Electronics. RadioFans.CN 收音机爱 好者资料库 i Boonton ElectronicsContents 4530 Series RF Power Meter Conte

6、nts CHAPTER/SECTIONPAGE List of Tables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii List of Illustrations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Safety Summary. . . . . . . . . . . . . . . . . . .

7、. . . . . . . . . . . . . . . . . . . . . . . . . . ix Repair Policy and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi 1. GENERAL INFORMATION 1.1Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.2Features . .

8、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.3Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.4Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.4.1Ge

9、neral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.4.2Calibration Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 1.4.3Trigger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 1.4.4Sampling Characteristi

10、cs . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 1.4.5Measurement Characteristics . . . . . . . . . . . . . . . . . . . . . . . 1-3 1.4.6Sensor Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 1.4.7Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11、 . . . . . . . . . . 1-4 1.4.8Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . 1-5 1.4.9Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 2. INSTALLATION 2.1Unpacking and Re-Packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12、. 2-1 2.2Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 2.3Internal Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 2.4Preliminary Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

13、-1 3. OPERATION 3.1Operating Controls, Indicators and Connections. . . . . . . . . . . . . . . 3-1 3.2Key Function Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 RadioFans.CN 收音机爱 好者资料库 ii ContentsBoonton Electronics 4530 Series RF Power Meter 3.3Display Functions . .

14、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 3.3.1Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 3.3.2Measurement Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 3.3.3Status Window . . . . . . . . . . . . . . .

15、. . . . . . . . . . . . . . . . . . 3-5 3.3.4Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 3.3.5Header / Page Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 3.4Operating Mode Summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16、. 3-6 3.4.1Menu Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 3.4.2Text Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 3.4.3Graph Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 3.4.4Edit Mode. . . . .

17、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 3.4.5Zero/Calibration Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 3.5Menu Mode Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 3.5.1Entry . . . . . . . . . . . . . . . . . . . . . .

18、 . . . . . . . . . . . . . . . . . . . 3-8 3.5.2Navigation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 3.5.3Menu Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 3.5.4Menu Screen Display. . . . . . . . . . . . . . . . . . . . . . . .

19、. . . . . 3-9 3.5.5Menu Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 3.6Text Mode Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 3.6.1Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

20、3.6.2Measurement Page Selection . . . . . . . . . . . . . . . . . . . . . . . 3-11 3.6.3Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11 3.6.4Measurement Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11 3.6.5Parameter Editing from Text Mode. .

21、. . . . . . . . . . . . . . . . . 3-11 3.7Graph Mode Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11 3.7.1Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12 3.7.2Measurement Page Selection . . . . . . . . . . . . . . . . . .

22、. . . . . 3-12 3.7.2Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12 3.7.3Measurement Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12 3.7.4Parameter Editing from Graph Mode . . . . . . . . . . . . . . . . . 3-12 3.8Edit Mode Operation. . . . .

23、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12 3.8.1Entry, Exit and Channel Selection . . . . . . . . . . . . . . . . . . . . 3-12 3.8.2Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12 3.8.3Parameter Selection. . . . . . . . . . . . . . . . . .

24、 . . . . . . . . . . . . 3-12 3.8.4Parameter Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13 Contents (Cont) CHAPTER/SECTIONPAGE iii Boonton ElectronicsContents 4530 Series RF Power Meter 3.9Display Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25、. . . . . 3-14 3.9.1Channel Selection and Paging. . . . . . . . . . . . . . . . . . . . . . . 3-14 3.9.2Mixed Mode Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15Operation. . . . . . . . . . . . . . . . . . . . . . . . . and Calibration . . . . . . . . . . . . . . . . . . . . . .

26、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (step) Calibration . . . . . . . . . . . . . . . . . . . . . Calibration . . . . . . . . . . . . . . . . . . . . . . . . .

27、 . 3.10 Sensor Connection and Calibration . . . . . . . . . . . . . . . . . . . . . . . . 3-16 3.10.1 Sensor Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17 3.10.2 Zero Offset Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18 3.10.3 Fixed Calibration .

28、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18 3.10.4 Automatic (step) Calibration . . . . . . . . . . . . . . . . . . . . . . . 3-18 3.10.5 Frequency Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18 3.10.6 Calibrator Selection . . . . . . . . . . . . . .

29、 . . . . . . . . . . . . . . . . 3-18 3.10.7 Calibration Volatility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19 3.10.8 Zero/Cal Menu Navigation. . . . . . . . . . . . . . . . . . . . . . . . . 3-19 3.11 Menu Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30、. . . . . . . 3-21 3.11.1 Measure Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22 3.11.2 Channel Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23 3.11.3 Markers Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30 3.11.4

31、 Trig/Time Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31 3.11.5 Statisticl Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-34 3.11.6 Calibratr Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35 3.11.7 Save/Recl Menu . .

32、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-37 3.11.8 Utilities Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-37 3.11.9 Help Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-43 3.11.10Defaults Menu . . . . . . . . . . . .

33、. . . . . . . . . . . . . . . . . . . . . . 3-43 3.11.11Menu Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-44 3.12 Error Messages and Status Codes . . . . . . . . . . . . . . . . . . . . . . . . . 3-47 3.13 Recorder Output Calibration . . . . . . . . . . . . . . . . . .

34、 . . . . . . . . . . . 3-49 3.14 Firmware Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-50 4. REMOTE OPERATION 4.1GPIB Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 4.2Serial Port Operation. . . . . . . . . . . . . . .

35、. . . . . . . . . . . . . . . . . . . . 4-1 4.3SCPI Language Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Contents (Cont) CHAPTER/SECTIONPAGE iv ContentsBoonton Electronics 4530 Series RF Power Meter Contents (Cont) CHAPTER/SECTIONPAGE 4.4Basic Measurement Operation .

36、 . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 4.5Command Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 4.5.1MEASure Queries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 4.5.2INITiate and ABORt Commands. . . . . . . . . . . . . .

37、. . . . . . 4-5 4.5.3FETCh Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 4.5.4READ Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9 4.5.5Native Mode Queries . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 4.4.6SENSe Subsystem . . . .

38、 . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19 4.5.7Calculate Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24 4.5.8MARKer Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28 4.5.9DISPlay Subsystem . . . . . . . . . . . . . . . . . . . . . . .

39、. . . . . . . 4-29 4.5.10 TRIGger Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33 4.5.11 TRACe Data Array Commands. . . . . . . . . . . . . . . . . . . . . 4-36 4.5.12 SENSe:MBUF Data Array Commands . . . . . . . . . . . . . . . 4-37 4.5.13 SENSe:SBUF Data Array Commands. .

40、. . . . . . . . . . . . . . 4-39 4.5.14 SENSe:HIST only zero offset adjustment is available. When a peak or CW sensor is step calibrated (AutoCal) a zeroing procedure is performed followed by a power step calibration in small increments over the entire dynamic range of the sensor. The resulting cali

41、bration table is saved in non-volatile memory. If a new peak sensor, which has not been AutoCaled, is plugged in, the AutoCal message will appear in the graphics and text headers indicating that a calibration must be performed before any measurements can be made, since there is not yet a valid calib

42、ration table for the peak sensor in use. When a new calibration has successfully completed, the previous one will be overwritten. Occasionally, a zero or calibration procedure may not complete successfully. In most cases, this can be traced to the sensor not being connected to the active calibrator.

43、 Zeroing can be performed any time the signal source is turned completely off or the sensor RF port is disconnected. Fixed or autocal must be performed with the sensor connected to the instruments internal calibrator port, or the port of a Model 2530 1GHz Calibrator. In either case, the active calib

44、ration source must be set to match the calibrator being used in the Zero/Cal CalSource menu. If zeroing ro calibration fails, a status code is reported on the display. See table 3-8 for a list of calibration status codes. 3.10.1 Sensor Connection. Connect the sensor to the 4530 by plugging one end o

45、f a sensor cable into the power sensor and the other end into the sensor input on the instruments front (or rear) panel. Peak power sensor cables are the same on both ends, so it does not matter which end of the cable is inserted into the sensor. CW power sensors and RF voltage probes use a two-pin

46、connector on the sensor, and the cable has a multi-pin smart adapter on the instrument end. This adapter contains the EEPROM that holds the sensors character- istics and calibration information, so the cable/adapter assembly must be matched to the sensor. Serial number labels on each should be used

47、to identify matching assemblies. When the sensor is connected to the 4530, message is displayed indicating the type and model of the sensor, and will download its calibration information. At this point, CW and voltage sensors may be used to take measurements using the default shaping calibration tec

48、hnique. For best accuracy, however, a sensor zero and/or calibration should be performed. Peak sensors require a multi-point calibration (autocal) before mea- surements can be taken for the first time. 3-18 Chapter 3Boonton Electronics Operation4530 Series RF Power Meter 3.10.2 Zero Offset Adjustmen

49、t. After a CW sensor is connected, and anytime a low-level measurement is about to be taken, the sensor should be zeroed. To zero a sensor, press the Zero/CAL button to display the Zero/ Calibration menu. Peak sensors may also be zeroed once they have been autocaled, but this is not necessary immediately following an autocal, since zeroing is performed as part of any autocal process. If more than one sensor is connected to the 4530, the keys may be used to select the desired sensor. The Zero/Cal menu is shown in Table 3-4. Connect the sensor to the instruments calibrator or to a term