FLUKE 5725A__gseng0000 电路图.pdf

《FLUKE 5725A__gseng0000 电路图.pdf》由会员分享，可在线阅读，更多相关《FLUKE 5725A__gseng0000 电路图.pdf（42页珍藏版）》请在收音机爱好者资料库上搜索。

1、 PN 1780175 April 2014 2002-2014 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their respective companies. 5725A Amplifier Getting Started RadioFans.CN 收音机爱 好者资料库 LIMITED WARRANTY AND LIMITATION OF LIABILITY Each Fluk

2、e product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is one year and begins on the date of shipment. Parts, product repairs, and services are warranted for 90 days. This warranty extends only to the original buyer or end-user cu

3、stomer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in Flukes opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation or handling. Fluke warrants that soft- ware will operat

4、e substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on non-defective media. Fluke does not warrant that software will be error free or operate without interruption. Fluke authorized resellers shall extend this warranty on new and unused

5、 products to end-user customers only but have no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is available only if product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price. Fluke reserves the right t

6、o invoice Buyer for importation costs of repair/replacement parts when product purchased in one country is submitted for repair in another country. Flukes warranty obligation is limited, at Flukes option, to refund of the purchase price, free of charge repair, or replacement of a defective product w

7、hich is returned to a Fluke authorized service center within the warranty period. To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product to that service center, with a description of the difficulty, postage a

8、nd insurance prepaid (FOB Destination). Fluke assumes no risk for damage in transit. Following warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that failure was caused by neglect, misuse, contamination, alteration, accident, or abn

9、ormal condition of operation or handling, including overvoltage failures caused by use outside the products specified rating, or normal wear and tear of mechanical components, Fluke will provide an estimate of repair costs and obtain authorization before commencing the work. Following repair, the pr

10、oduct will be returned to the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation charges (FOB Shipping Point). THIS WARRANTY IS BUYERS SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, IN- CLUDING BUT NOT LIMITED TO

11、ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY. Since some countries or states do not allow limitation of the te

12、rm of an implied warranty, or exclusion or limitation of incidental or consequential dam- ages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdictio

13、n, such holding will not affect the validity or enforceability of any other provision. Fluke Corporation P.O. Box 9090 Everett, WA 98206-9090 U.S.A. Fluke Europe B.V. P.O. Box 1186 5602 BD Eindhoven The Netherlands 11/99 To register your product online, visit RadioFans.CN 收音机爱 好者资料库 Interference Inf

14、ormation This equipment generates and uses radio frequency energy and if not installed and used in strict accordance with the manufacturers instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a Class B computing devi

15、ce in accordance with the specifications of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept

16、 any interference received, including interference that may cause undesired opera- tion. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment o

17、ff and on, the user is encouraged to try to correct the interference by one of more of the following measures: Reorient the receiving antenna Relocate the equipment with respect to the receiver Move the equipment away from the receiver Plug the equipment into a different outlet so that the computer

18、and receiver are on different branch circuits If necessary, the user should consult the dealer or an experienced radio/television technician for additional sug- gestions. The user may find the following booklet prepared by the Federal Communications Commission helpful: How to Identify and Resolve Ra

19、dio-TV Interference Problems. This booklet is available from the U.S. Govern- ment Printing Office, Washington, D.C. 20402. Stock No. 004-000-00345-4. RadioFans.CN 收音机爱 好者资料库 Declaration of the Manufacturer or Importer We hereby certify that the Fluke Model 5725A Amplifier is in compliance with BMPT

20、 Vfg 243/1991 and is RFI suppressed. The normal operation of some equipment (e.g. signal generators) may be subject to specific re- strictions. Please observe the notices in the users manual. The marketing and sales of the equipment was re- ported to the Central Office for Telecommunication Permits

21、(BZT). The right to retest this equipment to verify compliance with the regulation was given to the BZT. Bescheinigung des Herstellers/Importeurs Hiermit wird bescheinigt, da Fluke Models 5725A Amplifier in bereinstimung mit den Bestimmungen der BMPT-AmtsblVfg 243/1991 funk-entstrt ist. Der vorschri

22、ftsmige Betrieb mancher Gerte (z.B. Mesender) kann allerdings gewissen Einschrnkungen unterliegen. Beachten Sie deshalb die Hinweise in der Bedienung- sanleitung. Dem Bundesamt fr Zulassungen in der Telekcommunikation wurde das Inverkehrbringen dieses Gertes angezeigt und die Berechtigung zur berprf

23、ung der Seire auf Einhaltung der Bestimmungen eingerumt. Fluke Corporation OPERATOR SAFETY SUMMARY WARNING HIGH VOLTAGE is used in the operation of this equipment LETHAL VOLTAGE may be present on the terminals, observe all safety precautions! To avoid electrical shock hazard, the operator should not

24、 electrically contact the output hi or sense hi bind- ing posts. During operation, lethal voltages of up to 1100V ac or dc may be present on these terminals. Whenever the nature of the operation permits, keep one hand away from equipment to reduce the hazard of current flowing thought vital organs o

25、f the body. Terms in this Manual This instrument has been designed and tested in accordance with IEC Publication 348, Safety Requirements for Electronic Measuring Apparatus. This manual contains information and warnings which have to be followed by the user to ensure safe operation and to retain the

26、 instrument in safe condition. Warning statements identify conditions or practices that could result in personal injury or loss of life. Caution statements identify conditions or practices that could result in damage to the equipment or other property. Symbols Marked on Equipment DANGER High Voltage

27、 Protective ground (earth) terminal Attention refer to the manual. This symbol indicates that information about the usage of a feature is contained in the manual. Power Source The 5725A is intended to operate from a power source that will not apply more than 264V ac rms between the supply con- ducto

28、rs or between either supply conductor and ground. A protective ground connection by way of the grounding conductor in the power cord is essential for safe operation. Use the Proper Fuse To avoid fire hazard, use only the fuse specified on the line voltage selection switch label, and which is identic

29、al in type volt- age rating, and current rating. Grounding the 5725A The 5725A is Safety Class I (grounded enclosure) instruments as defined in IEC 348. The enclosure is grounded through the grounding conductor of the power cord. To avoid electrical shock, plug the power cord into a properly wired e

30、arth grounded receptacle before connecting anything to any of the 5725A or 5700A terminals. A protective ground connection by way of the grounding conductor in the power cord is essential for safe operation. Use the Proper Power Cord Use only the power cord and connector appropriate for proper opera

31、tion of a 5725A in your country. Use only a power cord that is in good condition. Refer cord and connector changes to qualified service personnel. Do Not Operate in Explosive Atmospheres To avoid explosion, do not operate the 5725A in an atmosphere of explosive gas. Do Not Remove Cover To avoid pers

32、onal injury or death, do not remove the 5725A cover. Do not operate the 5725A without the cover properly in- stalled. There are no user-serviceable parts inside the 5725A, so there is no need for the operator to ever remove the cover. Do Not Attempt to Operate if Protection May be Impaired If the 57

33、25A appears damaged or operates abnormally, protection may be impaired. Do not attempt to operate it. When is doubt, have the instrument serviced. SERVICING SAFETY SUMMARY FOR QUALIFIED SERVICE PERSONNEL ONLY Also refer to the preceding Operator Safety Summary Do Not Service Alone Do not perform int

34、ernal service or adjustment of this product unless another person capable of rendering first aid and resuscitation is present. Use Care When Servicing With Power On Dangerous voltage exist at many points inside this product. To avoid personal injury, do not touch exposed connec- tions and components

35、 while power is on. Whenever the nature of the operation permits, keep one hand away from equipment to reduce the hazard of current flowing through vital organs of the body. Do not wear a grounded wrist strap while working on this product. A grounded wrist strap increase the risk of current flowing

36、through the body. Disconnect power before removing protective panels, soldering, or replacing components. High voltage may still be present even after disconnecting power. FIRST AID FOR ELECTRIC SHOCK Free the Victim From the Live Conductor Shut off high voltage at once and ground the circuit. If hi

37、gh voltage cannot be turned off quickly, ground the circuit. If the circuit cannot be broken or grounded, use a board, dry clothing, or other nonconductor to free the victim. Get Help! Yell for help. Call an emergency number. Request medical assistance. Never Accept Ordinary and General Tests for De

38、ath Symptoms of electric shock may include unconsciousness, failure to breathe, absence of pulse, pallor, and stiffness, and well as severe burns. Treat the Victim If the victim is not breathing, begin CPR or mouth-to-mouth resuscitation if you are certified. i Table of Contents Title Page Introduct

39、ion . 1 Contacting Fluke . 2 Where to Go From Here . 2 How to Use the Manuals . 4 5725A Getting Started Manual . 4 5725A Instruction Manual . 4 5700A/5720A Series II Manual Set . 4 5700A/5720A Series II Operator Manual . 4 5700A/5720A Series II Operator Reference Guide . 5 5700A/5720A Series II Remo

40、te Programming Reference Guide . 5 5700A/5720A Series II Service Manual . 5 General Specifications . 6 Unpacking and Inspection . 8 Service Information . 11 Placement and Rack Mounting. 11 Cooling Considerations . 12 Connecting to the 5700A Calibrator . 12 5725A Getting Started ii Selecting Line Vol

41、tage . 14 Accessing the Fuse. 16 Connecting to Line Power . 18 Front-Panel Features . 18 Rear-Panel Features. 22 Turning on the 5725A Amplifier . 25 Warm Up . 25 iii List of Tables Table Title Page 1. Standard Equipment . 8 2. Line Power Cord Types Available from Fluke . 9 3. Front-Panel Features . 20 4. Rear-Panel Features . 23 5725A Getting Started iv