1270P_Powered_Monitor_Service_Manual 电路图.pdf
《1270P_Powered_Monitor_Service_Manual 电路图.pdf》由会员分享,可在线阅读,更多相关《1270P_Powered_Monitor_Service_Manual 电路图.pdf(11页珍藏版)》请在收音机爱好者资料库上搜索。
1、1270P MONITOR p/n 071-1271-000 (120V) SERVICE MANUAL CONTENTS: Notices Specifications Service notes Parts lists: PCB assembly Chassis (input) assembly Cab (baffle) assembly End item Schematics/drawings Fender Musical Instruments Corp. 7975 North Hayden Road Scottsdale, AZ 85258 RadioFans.CN 收音机爱 好者资
2、料库 1270P MONITOR (This is the name for warranty claims) SERVICE MANUAL MARCH 2000 IMPORTANT NOTICE: The information contained herein is CONFIDENTIAL and PROPRIETARY to Fender Musical Instruments Corp. It is disclosed solely for use by qualified technicians for purposes of equipment maintenance and s
3、ervice. It is not to be disclosed to others without the expressed permission of Fender Musical Instruments Co. All specifications subject to change without notice. For warranty repair service, only Fender specified part numbers are to be used. It is recommended they also be used for post-warranty ma
4、intenance and repair. Parts marked with an asterisk (*) indicate the required use of that specific part. This is necessary for RELIABILITY and SAFETY requirements. DO NOT USE A SUBSTITUTE! A coded naming convention is used in the description of certain parts. The codes and what they mean are as foll
5、ows: CAPACITOR CODES HARDWARE CODES CAP AE=Aluminum ElectrolyticBLX=Black Oxide CAP CA=Ceramic AxialCR=Chrome Plated CAP CD=Ceramic DiskHWH=Hex Washer Head CAP MPF=Metalized Polyester FilmM=Machine Screw CAP MY=MylarNI=Nickel Plated CAP PFF=Polyester Film/FoilOHP=Oval Head Phillips PB=Particle Board
6、 RESISTOR CODESPHP=Pan Head Phillips PHPS=Pan Head Phillips Sems RES CC=Carbon CompSMA=Sheet Metal A Point RES CF=Carbon FilmSMB=Sheet Metal B Point RES FP=Flame ProofSS=Stainless Steel RES MF=Metal FilmTF=Thread Forming RES WW=Wire WoundZI=Zinc Plated RadioFans.CN 收音机爱 好者资料库 1270P MONITOR SPECIFICA
7、TIONS Product Release No.:PR 435 (This is not a model number) Part Number:71-1271-000 (120V, 60Hz)71-1271-060 (230V, 50Hz) Eur 71-1271-040 (230V, 50Hz)71-1271-030 (240V, 50Hz) Aust Power Requirement:360W Power Output:100W, THD 0.5% (bi-amped) Inputs:XLR Balanced, mic-level (Mic input supplied w/full
8、-time 15V phantom pwr); 1/4 TRS balanced, line-level (LINE input); 1/4 TS unbalanced, line level (AMP IN input) Outputs:1/4 TS unbalanced, line-level (LINE OUT output) Frequency Response:110Hz - 20k Maximum Output SPL at 1M:109dB (continous)115dB (peak) Input Sensitivity:Line: 100mV RMS, -20dBV and
9、Mic: 10mV RMS, -40dBV Amp In: 1V RMS, 0dBV (LEVEL max for all three inputs) Tone Control:+/- 10 dB 12kHz Low Freq. Driver:10 (25.4 cm), 4 with 2 (5.1 cm) Voice Coil (p/n 0055911000) High Freq. Driver:Coaxial Piezo Compression Driver, 1.5 Diaphragm (p/n 0055741000) Maximum Output:115dB (Continous), 1
10、21dB (peak 1 Meter) Crossover Freq:2.2kHz Dimensions:Height:13 3/8(34 cm) Width: 13 3/8(34 cm) Depth: 9 1/8(23.2 cm) Weight:22 lbs.(10 kg) Product specifications are subject to change without notice RadioFans.CN 收音机爱 好者资料库 1270P MONITOR SERVICE NOTES Disassembly For Servicing Accessing power amp: Re
11、move four (4) screws securing the metal grille, remove grille; remove two (2) screws securing the heatsink, the wires are sufficiently long to allow removal of the power amp PCB assembly Accessing input assembly: Remove four (4) screws securing the input plate, the plate/PCB assembly may be removed
12、through the opening (note: it may be necessary to clip one or two wire ties in order to accomplish this). Transformer replacement: In the event it becomes necessary to access or replace the power transformer, the wooden baffle will have to be removed; this can be accomplished by first removing the g
13、rille, removing twelve (12) screws around the perimeter of the baffle, then removing the baffle. The transformer is mounted to the baffle with three (3) screws (Note: the input assembly will have to be removed in order to disconnect the transformer leads). Speaker Replacement: Remove four (4) screws
14、 securing the metal grille, remove the grille; remove four (4) screws securing the speaker, remove speaker. The speaker is comprised of a low-frequency driver and a high-frequency driver. Each is separately replaceable. To remove the high-frequency driver, unscrew it from the rear of the low-frequen
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 1270P_Powered_Monitor_Service_Manual 电路图 1270 P_Powered_Monitor_Service_Manual
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


