PA-2_Test_Spec_96 电路图.pdf
《PA-2_Test_Spec_96 电路图.pdf》由会员分享,可在线阅读,更多相关《PA-2_Test_Spec_96 电路图.pdf(3页珍藏版)》请在收音机爱好者资料库上搜索。
1、- PA2 TEST SPEC TEST SPECIFICATION: Sorial No: 14021 1 onwards Issue 2: 30th ADM. 1996. Tolerance on inputs +/-O.3dB, outputs +/-ldB, unless stated otherwise. 1. MAINS VOLTAGE: Set to 240V. 2. GROUND CONTINUITY: Limit 0.01 ohms. 2.1 Measure the resistance between the ground pin of the IEC inlet to t
2、he chassis ground screw. 3. VISUAL INSPECnON: Inspect the unit, paying particular attention to the following items: 3.1 - the orientation of power supply diodes and capacitors, 3.2 - the orientation of Ics, 3.3 - all mains wiring, 3.4 - the quality of external paint and silk screening, 3.5 - check a
3、ll knobs and switches operate freely and are unifonnly spaced from the panel, 3.6 - all XLR connectors are locked, 3.7 - LED alignntent with front panel. Tests 4 and 5 should be performed on each channel: 4. PHANTOM POWER: +24V+/-IV. DI Box: 48V On, measure on pins 2 and 3 of Mic input socket with 6
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- PA-2_Test_Spec_96 电路图 PA _Test_Spec_96
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


