Audix_OM5_Specifications电路图.pdf

《Audix_OM5_Specifications电路图.pdf》由会员分享，可在线阅读，更多相关《Audix_OM5_Specifications电路图.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、OM5DYNAMIC VOCAL MICROPHONE overview First produced in 1995, the OM5 dynamic vocal microphone has become highly regard- ed by artists and engineers for its ability to produce quality sound at very high sound pressure levels without distortion or feed- back. The OM5 is naturally attenuated at 120 Hz

2、to reduce boominess and handling noise. The mid-range is tailored for clarity and presence making it easier for the vocals to be heard both in the mains and monitors. By employing Audixs VLM (very low mass) capsule technology, the OM5 has exception- al transient response. An extremely tight and unif

3、ormly controlled hypercardioid pat- tern helps to isolate the vocals from the rest of the instruments on stage. The OM5 is comfortable to hold, durable, and manu- factured with extremely tight tolerances. The result is an unparalleled consistency in sound and performance at a very competi- tive pric

4、e. features gClear and accurate vocal reproduction gHandles high SPL without distortion gLow handling noise gProvides exceptional gain before feedback gProvides maximum vocal isolation on stage gDent resistant spring steel grill specifications Transducer TypeDynamic Frequency Response48 Hz- 19 kHz P

5、olar PatternHypercardioid Output Impedance 200 ohms Sensitivity2.4 mV ref 1k 1 Pascal Capsule TechnologyVLM Type C Off axis rejection30 dB Maximum SPL144 dB Cable/Connector3 pin gold plated male XLR PolarityPositive voltage on pin 2 relative to pin 3 of output XLR connector HousingZinc alloy Weight1

6、0.8oz/307 grams FinishBlack E-coat Lead Vocals Background Vocals Brass Guitar Saxophone Drums Percussion applications gLive Stage, live recording Excellent for lead and backing vocals - all venues gInstruments Sax, brass, guitar, dobro, flute, percussion, drums gBroadcast Announce mic, interview mic

7、 gHome Studio Multi-use vocal and instrument applications RadioFans.CN 收音机爱 好者资料库 Audix Corporation PO Box 4010, Wilsonville, OR 97070 In Canada, Cabletek Electronics LTD, 604-942-1001 fax 604-942-1010 Audix Corporation 2002. All rights reserved. Audix and the Audix logo are trademarks of Audix Corp

8、oration. CALL: 503-682-6933 FAX: 503-682-7114 Specifications are subject to change without written notice. Operation and Maintenance: Although the OM-5 is a durable handheld dynamic microphone with a dent-resistant spring steel grill, it should still be handled with care. Avoid extreme temperatures

9、wherever possible. Phantom power: The OM-5 is a dynamic microphone and does not require phantom power; be assured that phantom power will not adversely affect the performance of the OM-5 in any way. Recording: The OM-5 has a very sophisticated, high quality transducer element, and can be very useful

10、 for a wide variety of recording applications. For live recording, or to attain the feel of a live vocal, the OM5 is an excellent choice. It will provide a true, accurate sound and isolate the vocal(s) from other surrounding instruments. Because of the tight hypercardioid pattern of the OM5, it is i

11、mportant to place the microphone directly on axis and as close as possible to the sound source. Since the OM5 is able to handle very high sound pressure levels, it can be successfully utilized to mic a wide variety of instruments, both acoustic and electric. Live Sound: Impedance: The OM5 is a low i

12、mpedance microphone and for optimum results it should be plugged into a low impedance mic input. In most cases a mic level input is a 3 pin XLR, however, in some cases (as with Karaoke machines) a mic level input may require a 1/4” jack. In this case, you will want to use an XLR1/4” mic cable. Outpu

13、t level: The OM-5 has a fairly high output level, however, it is important to note that “high output” from a microphone in and of itself may not necessarily be a good feature. In fact, high output from the mic may result in overloading the input level of the consule and cause distortion. Loudness ca

14、n be easily controlled by simply using the faders! More important questions to ask regarding a microphones performance would be the following: 1) How loud can a microphone get before feedback (gain before feedback) 2) How much sound on stage will the microphone reject, especially on a stage with flo

15、or monitors and multiple microphones (off axis rejection) 3) How much sound pressure level (SPL) will a microphone handle before it distorts PA System: Although the OM5 can be utilized in any type of venue, it is ideally suited for a professional PA system with subs and floor mon- itors on stage. It

16、 is designed with a natural bass attenuation in order to reduce boominess, and it has a slight midrange presence to provide vocal clarity. In most cases, the OM5 sounds very natural without adding much EQ. Stage Use: The OM5 is a problem solver. It can help control feedback and also help to get the

17、vocals above the music. Try using an OM5 when: The stage is very tight and the vocal mics are in close proximity to the drums and amps. The drummers vocal mic is picking up more drums than vocals. The vocalists are having a difficult time hearing themselves. You want cleaner separation of sound thro

18、ugh the mains You want to achieve more gain from your background vocals The Trade Off: There is a trade off for achieving higher levels of gain before feedback and for getting the vocals above the mix. Since the OM5 has such an incredibly tight pick-up pattern, the singers MUST STAY RIGHT ON the mic

19、rophone. Even if the vocalist wanders of the mic a few inches, you will notice a drop off in their vocal. With the OM5, you can achieve remarkable results if the vocalist understands the benefits of staying right on top of the mic. Floor Monitors: The OM5 is extremely stable around floor monitors an

20、d will work with the monitors either straight on or at an angle. This allows lead vocalists freedom on stage without the worry of feedback. The behavior of the microphone relative to floor monitors will, of course, vary from room to room, which means that dialing in the monitors becomes an important

21、 part of sound check. Mic Placement: In general, allow a minimum distance of 2-3 feet between microphones to avoid phase problems. Supplied Accessories g Mic clip (MC1) adjustable through 180 degrees with standard 5/8 inch 27 thread. Note: Metal thread adapter also supplied to accommodate European s

22、tands. g Zippered microphone carrying pouch. (P1) Optional Accessories g WS357 External Foam windscreen (WS-357) g 25 XLR-XLR low noise microphone cable (CBL25) OM5DYNAMIC VOCAL MICROPHONE Measurement in Millimeters Polar Charts Measurements The frequency response curve shown (measuring tolerance at

23、 3dB) and polar pattern correspond to typical production run specifications for this microphone. Frequency Response (on and off axis) 125Hz 8000Hz 16000Hz WARNING: Avoid excessive moisture as it can adversely affect the sound and performance of your microphone. OUTPUT: The OM-5 output is balanced ac

24、ross Pin 2 (positive) with respect to Pin 3. The shield is connected to Pin 1. It is recommended to use a high quality microphone cable with 3 pin XLR connectors. SERVICE AND WARRANTY: This microphone is warranted for a period of 1 year from any and all manufacturing defects. Should your microphone fail in any way, please contact the Audix Service department at 503-682-6933. A Return Authorization number is required before sending back any products. RadioFans.CN 收音机爱 好者资料库