Audix_i5_Specifications电路图.pdf

《Audix_i5_Specifications电路图.pdf》由会员分享，可在线阅读，更多相关《Audix_i5_Specifications电路图.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、i5 OVERVIEW: Designed, assembled and tested by Audix in the USA, the i5 is a dynamic instrument microphone used for stage, studio and broadcast applications. The i5 is able to handle sound pressure levels in excess of 140 dB without distortion and can be used to mic a wide variety of musical instrum

2、ents, guitar and bass cabinets, vocals and speech. The i5 is characterized with a cardioid pickup pattern for isolation and feedback control and is equipped with a VLM (Very Low Mass) diaphragm for natural, accurate sound reproduction. The i5 is sturdy, compact and easy to position. With a wide freq

3、uency response of 50 Hz - 16 kHz, the i5 provides clear, accurate, natural sound reproduction without having to rely on EQ. Roadworthy construction includes a precision cast zinc alloy body, steel grill, black e-coat finish, laser etched model and serial number, Switchcraft XLR connector and include

4、s a heavy duty nylon mic clip. APPLICATIONS: Live stage, studio Snare, toms, percussion Guitar cabinets, electric instruments Bass cabinets Brass, flute, woodwinds Acoustic instruments Vocals, speech DYNAMIC INSTRUMENT MICROPHONE i5 Dynamic Instrument SUPPLIED ACCESSORIES: Heavy duty nylon mic clip

5、(MC1) Carrying pouch (P1) OPTIONAL ACCESSORIES: DFLEX - All purpose percussion clamp DVICE - Spring loaded rim mount clamp DCLAMP - Tension rod mic clamp WS-i5 - External foam windscreen CBL-20 - 20 XLR-XLR mic cable CBL-DR25 - 25 right angle XLR mic cable CAB GRABBER - Tension held mic holder, clam

6、ps to guitar cabinets DCLAMP DFLEX i5 on VOCALS CAB GRABBER i5 on SAX FEATURES: Clear and accurate sound reproduction Handles high SPL without distortion Provides exceptional gain before feedback Provides excellent isolation on stage Precision cast zinc alloy body and grill 5 year warranty RadioFans

7、.CN 收音机爱 好者资料库 SPECIFICATIONS:ARCHITECTS AND ENGINEERS SPECIFICATIONS: The microphone shall be of the dynamic type operating on the moving coil principle and the polar pattern of the microphone shall be cardioid. The capsule shall be VLM Type B. The nominal out- put impedance shall be equal to 150 o

8、hms at 1 kHz. The microphone shall have a sensitivity of 1.5 mV / Pa at 1 kHz and a sound pressure level 140 dB. The microphone body and grill shall be of die cast zinc alloy. The overall dimensions shall be 23 mm in diameter at the base, 37.5 mm at the top, and 141.5 mm in length. The microphone sh

9、all be the Audix i5. Call: 503-682-6933 Fax: 503-682-7114 Audix Corporation 9400 SW Barber Street, Wilsonville, OR 97070 Transducer Type Dynamic Frequency Response 50 Hz - 16 kHz Polar Pattern Cardioid Output Impedance 150 ohms Sensitivity at 1k 1.5 mV / Pa Capsule Technology VLM Type B Off Axis Rej

10、ection 23 dB Maximum SPL 140 dB Power Requirements None Connector Swithcraft male XLR connector Polarity Positive voltage on pin 2 relative to pin 3 of output XLR connector Housing / Finish Die cast Zinc Alloy / Black E-coat Weight 183 g / 6.5 ounces Length 141.5 mm / 5.6 inches OPERATION: The i5 is

11、 a low impedance microphone and should be plugged into a “mic level” input on your console, mixer, or recording device. Please note that your microphone does not require phantom power and will not be effected in any way by phantom power should it be running simultaneously when the microphone is in o

12、peration. Avoid plugging or unplugging the microphone from the PA system unless the channel is muted or the volume of the system turned down. Failure to do so may result in a loud “popping” noise which could seriously damage the speakers in the PA system. FREQUENCY / POLARS: To register your microph

13、one, please visit SERVICE AND WARRANTY: This microphone is under warranty for a period of 5 years from any and all manufacturing defects. Should your microphone fail in any way, please con- tact the Audix Service department at 503-682-6933. A Return Authorization number is required before returning

14、any products. CARE AND MAINTENANCE: The i5 is manufactured to exacting specs with roadworthy construction. However, the capsule is highly sensitive and should be handled with care. Avoid extreme temperatures and be sure to store your microphone in the pouch provided when not in use. Moisture of any

15、kind can adversely affect the sound and performance of your microphone. *All specifications subject to change without notice. USER TIPS: The i5 has a tight (cardioid) pick-up pattern in order to help eliminate sound from other instruments on stage from “bleeding” into the microphone. For this reason

16、, it the i5 is exceptionally effective for drums and percussion in be able to capture the sound of each component of the kit. Snare: Start with the i5 about 2 inches above the head and aimed towards the center of the drum. For more “rim” effect, the i5 can be aimed less towards the center and more t

17、owards the rim. It is not uncommon for engineers to place the mic practically right on the drum head to achieve a very tight, cracking sensation. Toms, congas: Similar to snare. For tighter sound and more attack place, the mic closer to the head. For more decay and overtones pull the mic further awa

18、y from the head. Guitar cabs: The i5 can be placed within 1-2 inches of the grill cover at a 90 degree angle pointing directly into the speaker. If the mic is placed closer to the edge of the speaker, you will minimize the higher frequencies and get a warmer, fatter tone. To capture more highs, move

19、 the mic closer towards the center of the speaker, but avoid the middle of the speaker. Horns: Place the mic within 1-3 inches of the bell, especially when on a stage with drums, bass, guitar, etc. For jazz, classical, and music where the stage volume is lower, the mic can be placed further away for a richer, fuller, sound. Allow a distance of 2-3 feet between microphones to avoid phase cancellation issues. *Further miking techniques may be found on our website at DIMENSIONS (mm): i5 RadioFans.CN 收音机爱 好者资料库