Audix_F15_Specifications电路图.pdf

《Audix_F15_Specifications电路图.pdf》由会员分享，可在线阅读，更多相关《Audix_F15_Specifications电路图.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、F15 OVERVIEW: The F15 is a condenser instrument microphone designed for live sound and studio applications. Characterized with a tailored frequency response of 100 Hz - 20 kHz, the F15 is ideally suited for instruments requiring detailed reproduction in mid-high and extended high end frequency range

2、s. A wide cardioid pick-up pattern along with high sensitivity allows for close miking as well as overhead and distance miking. Compact and roadworthy, the F15 features a durable die cast zinc alloy body and steel mesh grill. Low impedance and balanced output allow interference-free performance even

3、 with long cable runs. The F15 operates on phantom power of 9-52 volts. FEATURES: Multi-purpose instrument micrphone Excellent for capturing high frequencies Easy to position and use Roadworthy construction 3 year warranty APPLICATIONS: Cymbals Overheads Hi-Hat Goodie Table Audience mic SUPPLIED ACC

4、ESSORIES: Mic stand adapter (MC2) Carrying pouch (P1) OPTIONAL ACCESSORIES: TRIPOD - Tripod mic stand DFLEX - All purpose percussion clamp DVICE - Spring loaded rim mount clamp DCLAMP - Tension rod mic clamp CBL-20 - 20 XLR - XLR mic cable CBL-DR25 - 25 right angle XLR-XLR mic cable SMT-25 - Shockmo

5、unt suspension clip WS-81 - External foam windscreen APS-2 - Two-channel phantom power supply CONDENSER INSTRUMENT MICROPHONE F15 Instrument Condenser F15 on Cymbal D-FLEX TRIPOD SMT25 CBL-20 RadioFans.CN 收音机爱 好者资料库 SPECIFICATIONS: ARCHITECTS AND ENGINEERS SPECIFICATIONS: The microphone shall be a b

6、ack plate pre-polarized condenser available with a cardioid polar pattern. The microphone shall operate on 9-52 Volts phantom power and the nominal output impedance shall be equal to 200 ohms at 1 kHz. The microphone shall have a sensitivity of 10 mV / Pa at 1 kHz. The microphone shall have a maximu

7、m SPL level of 135 dB with THD of 0.5%. The microphone body shall be of die cast zinc alloy and the dimensions shall be 19 mm in diameter at the base, 28.5 mm in diameter at the widest point on the grill and 160 mm in length. The microphone shall be the Audix F15. OPERATION: The F15 is a low impedan

8、ce microphone and should be plugged into the “mic level” of your console, mixer, or recording device. Please note that the F15 requires phantom power and will NOT operate without phantom power voltage (48 Volts recommended) which is available on most professional mic preamps and mixing devices. If p

9、hantom power is not available on your equipment, you will have to purchase a phantom power supply (such as the Audix APS-2). Avoid plugging or unplugging the microphone from a PA system unless the channel is muted or the volume of the system is turned down. Failure to do so may result in a loud “pop

10、ping” noise which could seriously damage the speakers in the PA system. USER TIPS: The F15 has a cardioid pick-up pattern which helps to eliminate sound from other instruments on stage from “bleeding” into the microphone. However, since the F15 is a condenser microphone, it is much more sensitive th

11、an a dynamic and will pick-up sound from a greater distance. The acoustic nature of the instrument being miked along with how loud it is will determine how far the microphone should be from the sound source. For example, an F15 can be placed 1-2 feet above the cymbals of a drum kit and still pick up

12、 plenty of sound, whereas for a high-hat an F15 will need to be within 4-6 inches to be effective. Allow a distance of 2-3 feet between microphones to avoid phase issues. *Further miking techniques may be found on our website at Call: 503-682-6933 Fax: 503-682-7114 Audix Corporation 9400 SW Barber S

13、treet, Wilsonville, OR 97070 FREQUENCY / POLARS: SERVICE AND WARRANTY: This microphone is under warranty for a period of 3 years from any and all manufacturing defects. Should your microphone fail in any way, please contact the Audix Service department at 503-682-6933. A Return Authorization number

14、is required before returning any products. Transducer Type Pre-polarized condenser Frequency Response 100 Hz - 20 kHz Polar Pattern Cardioid Output Impedance 200 ohms Sensitivity 10 mV / Pa 1k Capsule Technology Black plate electret Off Axis Rejection 15 dB Noise Floor 25 dB (A weighted) Signal to N

15、oise Ratio 69 dB Dynamic Range 110 dB Maximum SPL 135 dB Power Requirements 9-52 volts phantom Connector 3 pin gold plated male XLR connector Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector Housing / Finish Die cast zinc / Black E-

16、Coat Weight 184 g / 6.5 ounces Length 160 mm / 6.3 inches To register your microphone, please visit CARE AND MAINTENANCE: The F15 is manufactured to exacting specs with roadworthy construction. However, the capsule is highly sensitive and should be handled with care. Avoid extreme temperatures and be sure to store your microphone in the pouch provided when not in use. Moisture of any kind can adversely affect the sound and performance of your microphone. *All specifications subject to change without notice. DIMENSIONS (mm): F15 RadioFans.CN 收音机爱 好者资料库