lexicon PCM91_sb_750-11396_pwrs#5EC电路图.pdf

《lexicon PCM91_sb_750-11396_pwrs#5EC电路图.pdf》由会员分享，可在线阅读，更多相关《lexicon PCM91_sb_750-11396_pwrs#5EC电路图.pdf（1页珍藏版）》请在收音机爱好者资料库上搜索。

1、3 Oak Park, Bedford, MA 01730-1441 | Tel: 781-280-0300 | Fax: 781-280-0490 | Customer Support: Tel: 781-280-0300 | Fax: 781-280-0495 (Sales) | Fax: 781-280-0499 (Service) email: Sales Administration, Spares, Product & Technical Support and Repair Services P/N 750-11396 (Power Supply Module) SERVICE

2、BULLETIN Please contact LEXICON CUSTOMER SERVICE with any questions. SB750-11396_PwrSup_010627-00 Date: March 15, 2002 1 SUBJECT: Improve reliability - P/N 750-11396 Power Supply Module (PCM81/91, MPX 1, MPX G2, DC-2, MC-1, SDP-3 REFERENCE: ECO 010627-00 DISTRIBUTION: International Distributor Servi

3、ce Centers, Customer Service and Repair CORRECTIVE ACTION: New manufacturers part specified EQUIPMENT REQUIRED: Clean, well-lighted anti-static workbench with grounded wrist-strap Technicians tool lit WARNING Only qualified technical personnel should perform modifications. Damage caused by performin

4、g this modification may void the manufacturers warranty or standard repair policies. CAUTION Electrostatic Discharge (ESD) Precautions The following practices minimize possible damage to ICs resulting from electrostatic discharge or improper insertion. Keep parts in original containers until ready f

5、or use. Avoid having plastic, vinyl or styrofoam in the work area. Wear a properly installed anti-static wrist-strap. Discharge personal static before handling devices. Remove and insert boards with care. When removing boards, handle only by non-conductive surfaces and never touch open-edge connecto

6、rs except at a static-free workstation.* Minimize handling of ICs. Handle each IC by its body. Do not slide ICs or boards over any surface. Insert ICs with the proper orientation, and watch for bent pins on ICs. Use static shielding containers for handling and transport. * To make a plastic-laminate

7、d workbench anti-static, wash with a solution of Lux liquid detergent, and allow to dry without rinsing. INSTRUCTIONS: The original power supply manufacturer for Lexicon P/N 750-11396 has been removed from the AVL (approved vendor list). PowDec P/N PTE43-34RC has been added to the AVL for 750-11396.

8、 The new manufacturers part is available for repairs and spare parts orders. The following lists the starting serial numbers where the new power supply module is used: DC-2: 4703 MC-1: TBD PCM81: 4889 PCM91: TBD SDP-3: 1807 For the MPX 1, power supply module part number 750-11062 has been replaced by 750-11396. 750-11396 should be used for any power supply failures. RadioFans.CN 收音机爱 好者资料库