Peavey_Valve_King_Hum_Reduction_Modification 电路图.pdf

《Peavey_Valve_King_Hum_Reduction_Modification 电路图.pdf》由会员分享，可在线阅读，更多相关《Peavey_Valve_King_Hum_Reduction_Modification 电路图.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

ValveKing Hum Reduction Modification Cut C139 on the side pointed towards the rear of the amp, leaving as much of the lead intact as possible. Solder a 1C shielded cable to the exposed side of C139 (see picture) and ground the shield, as shown. Cut signal trace to C140/R157/V3,pin 2 on power amp just before reaches any components. RadioFans.CN 收音机爱 好者资料库 Solder the other end of the shielded cable (see picture for length) to C140/R157/V3,pin 2. Remove the shield from the cable on the power amp side. RadioFans.CN 收音机爱 好者资料库