Roland EXR-5 Service Manual 电路图.pdf
《Roland EXR-5 Service Manual 电路图.pdf》由会员分享,可在线阅读,更多相关《Roland EXR-5 Service Manual 电路图.pdf(35页珍藏版)》请在收音机爱好者资料库上搜索。
1、EXR-5Oct.2003 SERVICE NOTES Issued by RES First edition SPECIFICATIONS2 DISASSEMBLY3 LOCATION OF CONTROLS4 EXPLODED VIEW (TOP)6 EXPLODED VIEW (BOTTOM)7 KEYBOARD PARTS LIST8 PARTS LIST 10/13 HOW TO SAVE - HOW TO VERSION UP14 HOW TO VISUALIZE THE SOFTWARE VERSION14 HOW TO SAVE THE SOFTWARE ON AFLOPPYD
2、ISK14 HOW TO UPDATE THE SOFTWARE15 FACTORYSETUP15 TEST MODE16/22 BLOCK DIAGRAM24 CIRCUIT BOARD (MAIN)26 CIRCUIT DIAGRAM (MAIN 1/6)28 CIRCUIT DIAGRAM (MAIN 2/6 - XP section)30 CIRCUIT DIAGRAM (MAIN 3/6 - KEY section)32 CIRCUIT DIAGRAM (MAIN 4/6 - MEMORY section)34 CIRCUIT DIAGRAM (MAIN 5/6 - FDC sect
3、ion)36 CIRCUIT DIAGRAM (MAIN 6/6 - USB section)37 CIRCUIT BOARD (JACK)38 CIRCUIT DIAGRAM (JACK)40 CIRCUIT BOARD (CONTROL)42 CIRCUIT DIAGRAM (CONTROL)44 CIRCUIT BOARD (PHONES)45 CIRCUIT DIAGRAM (PHONES)46 CIRCUIT BOARD (VOLUME)45 CIRCUIT DIAGRAM (VOLUME)46 CIRCUIT BOARD (SWITCH)45 CIRCUIT DIAGRAM (SW
4、ITCH)46 CIRCUIT BOARD (RIGHT-LEFT CONTACT)48 CIRCUIT DIAGRAM (RIGHT-LEFT CONTACT)48 SN00072K6018540Printed in Italy EXR-5 interactive arranger TABLE OF CONTENTS Copyright 2003 by ROLAND CORPORATION All rights reserved. No parts of this publication may be reproduced in any form whithout the written p
5、ermission of ROLAND CORPORATION. RadioFans.CN 收音机爱 好者资料库 Oct.2003 SPECIFICATIONS Keyboard: 61 keys, velocity sensitive Sound source: PCM samples Max polyphony: 64 voices Tones: 510 panel sounds + 542 XG compatible voices + 256 GM2 compatible sounds Drum Kits: 20 Drum Kits, 11 XG-compatible Drum Kits
6、 + 9 GM2- compatible Drum Kits Multitimbral parts: 19 Compatibility: GM2, GS, XG Lite Display type: New large backlit custom display Panel controls: VOLUME knob, ACCOMP/KEYBOARD BALANCE buttons, TEMPO/DATA buttons, BENDER/ MODULATION lever, FAMILY buttons, SELECT buttons, numeric buttons 09, 8 assig
7、nable TONE family buttons Music Styles: 103 Styles in Flash memory (84 factory + 19 changeable) One Touch: 2 x 84 Orchestrator: 3 levels: Drum Pressing the button 2, you select Le (LED TEST); Pressing the button 3, you select Lc (LCD TEST); Pressing button 4, you select Be (PITCH BENDER TEST); Press
8、 0 to get back to the main menu. Sw Le Lc Be TEST MODE EXR-5 1717 SWITCH TEST Pressing button 1, you enter the Switch test: Press the buttons on the control panel one by one in sequence. The display visualizes the name of the button pressed and you hear a sound. The switch test ends when all the con
9、trol panels buttons have been pressed and the system goes automatically back to the main menu (Sw, Le, Lc, Be). If you want to exit before pressing all the buttons, you can go back to the main menu (Sw, Le, Lc, Be) by keeping the buttons 1 and 0 pressed at the same time. LED TEST Pressing button 2,
10、the display visualizes : TEST LED The LEDs light up in sequence. At the end of the sequence they are all on. To exit, press button 0 (Exit). LCD TEST Pressing button 3, the display visualizes: ON OFF Pressing button 1 (ON), the display visualizes: Press button 0 (Exit) to get back to the previous me
11、nu page. Pressing button 2, the display shows the characters and symbols that are visualized when off. Press 0 (Exit) twice to go back to the main menu. Oct.2003 1818 PITCH BENDER TEST Pressing button 4, the display visualizes: OFF 0 Moving the Pitch Bender lever onwards, the value changes from OFF
12、to ON. When releasing it, the value changes from ON to OFF. Moving the lever all leftwards, the display visualizes 128; moving the lever all rightwards, the display visualizes 127. Releasing the lever in central position, the display visualizes 0. Press 0 (Exit) twice to go back to the main menu. (P
13、2) Rear Panel Test Go to main menu and press button 2. The display visualizes: Connect a Sustain Pedal (ie.:DP-2) to EXR-5 FOOT SWITCH output. Press button 1 to select the pedal test. Nothing is visualized on the display. Foot MIDI Press and release the pedal. The display visualizes: XXX: ON if the
14、pedal is full pressed; OFF if the pedal is released. Press 0 (Exit). MIDI Test Pressing button 2, the display visualizes: After connecting the Midi cable by short-circuiting the IN / OUT sockets, the display visualizes: OK (successful connection) or ER (connection failed). To exit press button 0 (Ex
15、it) then, press button 1 Sus XXX IN OUT EXR-5 1919 (FD) Floppy Disk Test Pressing button 3, the display visualizes: Then: Insert an unprotected and formatted HD floppy disk into the floppy disk driver. After a few seconds the display visualizes: The system automatically writes and reads the disk. Wa
16、it for the test result before leaving test mode: OK : if the test is successful; Disk Error: if there are any writing or reading problems; WRProt: if a protected disk has been inserted. FD TEST Insert Disk OK or Er Once the test has been completed, extract the disk. To exit press the button 0 (Exit)
17、. KEYBOARD TEST Pressing button 2 on the main menu, the display visualizes: When you press the keys, the display visualizes the number of the key pressed and its velocity value. YY: Key (from 36 to 96) XXX: Velocity value To exit press the button 0 (Exit). AUDIO TEST CAUTION: Make sure the instrumen
18、t is powered by an adaptor SA165A-1250U-3. Pressing button 3 on the main menu, the display visualizes: YY XXX Si Ft Ef Oct.2003 2020 Pressing button 1, the display visualizes: SINE Test procedure: 1. Insert a stereo jack into the headphones socket; 2. Put the volume potentiometer at max; 3. Check by
19、 an oscilloscope that the signals at the stereo jack have the following values (tolerance +/- 5%): LEFT RIGHT Amplitude3,10Vpp 3,30Vpp Frequency880Hz 1760Hz To exit press button 0 (Exit). NOTE: The audio test can also be carried out when powering on. In order to do it, turn the instrument on while k
20、eeping the button 3 pressed. Frequency test (FT test) Pressing button 2 you enter FT test. The display visualizes: Pressing button 1, you hear a sine sound of 100 Hz coming from both right and left loudspeakers and the display visualizes: To exit press button 0 (Exit). If you press button 2, you hea
21、r a sine sound of 1000 Hz coming from both right and left loudspeakers and the display visualizes: To exit press button 0 (Exit). If you press button 3, you hear a sine sound of 5000 Hz coming from both right and left loudspeakers and the display visualizes: To exit press the button 0 (Exit) twice.
22、f 1 f 2 f 3 100 Hz 1000 Hz 5000 Hz EXR-5 2121 Effect Test On Audio Test menu, pressing button 3, the display visualizes: Pressing button 1, you select REVERB TEST; Pressing button 2, you select CHORUS TEST; Reverb test REV CHO Pressing button 1, the display visualizes: You hear a reverbered drum sou
23、nd from the loudspeakers. To exit press button 0 (Exit). Chorus test Pressing button 2, the display visualizes: You hear a square wave sound with chorus effect coming from the loudspeakers. To exit press button 0 (Exit) 3 times. MEMORY TEST Pressing button 4 on the main menu, the display visualizes:
24、 M1 M2 Pressing button 1, the display visualizes: Pg Ra Fl Pressing button 1 to enter Pg, the display visualizes: Reverber Chorus WAIT Oct.2003 2222 Then, the display visualizes the test result: Ok: test succeeded Er: test failed To exit press button 0 (Exit). Pressing button 2 (to enter Ra), the di
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Roland EXR-5 Service Manual 电路图 EXR
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


