Rolls MX34 Mixer Manual & Schematic 电路图.pdf

《Rolls MX34 Mixer Manual & Schematic 电路图.pdf》由会员分享，可在线阅读，更多相关《Rolls MX34 Mixer Manual & Schematic 电路图.pdf（4页珍藏版）》请在收音机爱好者资料库上搜索。

1、MX34 LiveMix OWNERS MANUAL ROLLS CORPORATION SALT LAKE CITY, UTAH 11/04 LIMITED WARRANTY This product is warranted to the original consumer purchaser to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase

2、 as shown on the purchasers receipt. The obligation of Rolls Corporation under this warranty shall be limited to repair or replacement (at our option), during the warranty period of any part which proves defective in material or workmanship under normal installation, use and service, provided the pr

3、oduct is returned to Rolls Corporation, TRANS- PORTATION CHARGES PREPAID. Products returned to us or to an authorized Service Center must be accompanied by a copy of the purchase receipt. In the absence of such purchase receipt, the warranty period shall be one (1) year from the date of manufacture.

4、 This warranty shall be invalid if the product is damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our own service facilit

5、y or an authorized Service Center, or any use violative of instructions furnished by us. This one-year warranty is in lieu of all expressed warranties, obligations or liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILI- TIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTAB

6、ILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE ONE YEAR DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL

7、, INCI- DENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty gives you

8、specific legal rights, and you may also have other rights which vary from state to state. RadioFans.CN 收音机爱 好者资料库 INTRODUCTION Thank you for purchasing the new MX34 LiveMix - two channel microphone mixer. Although having many uses, this little mixer was originally designed with the video camera oper

9、ator in mind. Its handy shoulder strap, easy-access microphone Level and Pan controls, and smart Input/Output jack placement make the MX34 ideal for the live recording enthusiast. Two 9 volt alkaline batteries ensure adequate signal strength as well as phantom power for your favorite condenser micro

10、phone. Please review this manual carefully as it contains important information regarding the proper use of this product. INSPECTION 1. Unpack and Inspect the MX34 package Your MX34 was carefully packed at the factory in a protective carton. Nonetheless, be sure to examine the unit and the carton fo

11、r any signs of damage that may have occurred during shipping. If obvious physical damage is noticed, contact the carrier immediately to make a damage claim. We suggest saving the shipping carton and packing materials for safely transporting the unit in the future. 2. Please visit our website at , cl

12、ick on the Register Your Warranty Here text and follow the instructions to register your MX34. TABLE OF CONTENTS INTRODUCTION1 INSPECTION1 TABLE OF CONTENTS1 DESCRIPTION2 Front Panel Rear Panel Battery Installation Phantom Power CONNECTION3 A note on wiring a mono signal to the stereo AUX IN OPERATI

13、ON4 SCHEMATIC5 SPECIFICATIONS6 WARRANTYBACK COVER 1 SPECIFICATIONS Input Impedance: mic - 600 Ohms or greater XLR aux - 47K stereo 3.5mm Output Impedance:50 Ohms THD + Noise:.02% S/N Ratio:110 dB Frequency Response:20 Hz - 30 kHz (+0 / -1 dB) Max Output Level:+ 14 dB Max Input Level:+20 dB Max Gain:

14、+70 dB Batteries:2 X 9V Alkaline Current Draw:30 mA Phantom Power:+18 VDC Input Connectors:2 Female XLR, 1/8 (3.5mm) DC Power Jack:(5.5 X 2.1 mm tip negative) Output connectors:3.5mm stereo main out 3.5mm Headphone Size:6.3w x 3.7d x 1.4 h Weight:1 lbs. 6 RadioFans.CN 收音机爱 好者资料库 DESCRIPTION FRONT PA

15、NEL panpanpwr MX34 0 10L RL R LEVEL 0 10 LEVEL 0 10 OUTPUT LEVEL LIVEMIX MIC 1MIC 2HEADPHONE MIC1 and MIC2 LEVEL: Adjusts the amount of signal of the indicated Microphone channel. PAN: Adjusts the relative level of signal from the channel to the Right/Left Output. pwr: When lit, indicates that the M

16、X34 is on. A dim light indicates low battery voltage. HEADPHONE LEVEL: Adjusts the amount of signal from the Headphone Output. OUTPUT: 1/8 (3.5mm) jack containing the Headphone Output signal. REAR PANEL PWR 12 VDC STEREO OUT AUX IN + - CHANNEL 1 CHANNEL 2 INPUTS INPUTS: 1 - 2: XLR balanced inputs fo

17、r connection to any standard dynamic or con- denser microphone. The input circuitry has a very wide input range and can accomodate almost any (mic to line) level signal. AUX IN: Tip-Ring-Sleeve stereo 1/8 (3.5mm) jack for connecting to another line-level stereo signal source. STEREO OUT: Tip-Ring-Sl

18、eeve stereo 1/8 (3.5mm) jack for connection to a camera or other stereo input (Line-level only). 12 VDC jack: For connection to the Rolls PS27 12VDC power supply. POWER: Button applies power to the MX34. BATTERY INSTALLATION: To replace the 9 V alkaline batteries, first carefully press in and up on

19、the door to release the battery compartment. It then slides out and you can replace the battery. Remember to replace both batteries at the same time. PHANTOM POWER: The Phantom Power jumpers are set to the off position from the factory. To engage the phantom power, first make sure the MX34 is powere

20、d off, use a pair of needle-nose pliers or tweezers and carefully pull out the jumper corre- sponding to the channel you wish to power. Replace the jumper - connecting the two pins labeled on. SCHEMATIC PHANTOM POWER MADE IN USA on on CHANNEL 1 CHANNEL 2 INPUTS BATTERY LIFT TO WITHDRAW BATTERY LIFT

21、TO WITHDRAW 25 RadioFans.CN 收音机爱 好者资料库 34 CONNECTION Connect microphones to the MX34 via balanced XLR cables. Stereo auxiliary sources such as the output from another mixer, AM/FM tuners, CD Players, and MP3 players may be connected to the AUX IN via a stereo 1/8 (3.5mm) Tip-Ring-Sleeve plug. Connec

22、t the STEREO OUT to the Input of your recording device also using a stereo 1/8 (3.5mm) Tip-Ring-Sleeve plug. If you wish to use AC power for the MX34, connect the Rolls PS27 12VDC power supply. OPERATION Once your MX34 is properly connected, apply power by pressing in the POWER button on the rear pa

23、nel. The blue pwr LED on the front panel should light. If you are using condenser type microphones, apply the phantom power by moving the jumper(s) to the proper setting (see page 2). Test the microphone levels by speaking into the microphones at a normal operating volume, and adjust the Mic Level c

24、ontrols until you achieve desired levels. Adjust each Pan control to place the signal in the stereo field. Adjust the Headphone Level control for a comfortable listening volume. For best results, we recommend recording a couple of test runs to ensure you have proper levels set. When the signal becom

25、es weak and distorted, and the pwr LED dims, the batteries will need replacing. See page 2; Battery Installation for details. NOTE: ON CONNECTING A WIRELESS MIC TO THE AUX INPUT DO NOT CONNECT A MONO PLUG TO THE AUX IN OR STEREO OUTPUT. DOING SO WILL RESULT IN SIGNAL LOSS OR DAMAGE TO THE MX34. If y

26、ou need to connect a MONO signal (like the output of a wireless microphone) to the AUX IN of the MX34, you will need to make or purchase a MONO TO STEREO cable.Shown here is a diagram of this cables wiring. MONO PLUGTIP RING SLEEVE STEREO PLUG Tip and Ring are wired together, then connected to the Tip of the Mono Plug. Connect STEREO headphones or earphones to the 1/8 (3.5mm) HEADPHONE OUTPUT located on the MX34 front panel.