Rauland 2412 Clock Assembly 电路图.pdf

《Rauland 2412 Clock Assembly 电路图.pdf》由会员分享，可在线阅读，更多相关《Rauland 2412 Clock Assembly 电路图.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、KI Model 2412 Digital Clock and Speaker Assembly Installation -1405 IY RAULAND-BORG CORPORATION l 3450 West Oakton Street, Skokie, Illinois 60076-295 1 l (847) 679-0900 This baffle assembly is hung with the hanger bracket supplied with the unit. The bracket can be attached to a standard single-gang

2、electrical box or to a flat surface. Mounting the Baffle to an Electrical Box Parts needed: Qtu Description 1 hanger bracket (AB1813) (Supplied with 1 f8-32 x 3/4 pan-head metal screw (WA72) baffle assembly) 1 88-32 U type speed nut (AB1818) 1 Standard single-gang electrical box 2 #6-32 machine scre

3、ws of a suitable length Wiring from the control console to the baffle assembly: 3 (See the applicable Rauland amplifier and 2400 Series master clock manuals.) , (Supplied by customer.) Step 1. If necessary, rough the outlet box into the wall. Step 2. Pull through the wiring you need from the control

4、 console. Step 3. Fasten the hanger bracket to the ears of the outlet box, using two 116-32 screws. Step 4. Snap the speed nut, with the larger hole facing up, into the slotted hole ofthe bracket. Step 5. Connect the system wires to the Digital Module and the speaker transformer (the connections are

5、 shown on the label inside the baffle). Step 6. Hang the baffle on the bracket and fasten them together with the pan-head screw. 01984 RAULAND-BORG CORP. PRINTED IN U.S.A. 12/84 PAGE 1 OF 2 RadioFans.CN 收音机爱 好者资料库 Mounting the Baffle to a Flat Surface -1 Parts needed: Same as page i except: Qtv. Des

6、cription! - Nn electrical lx:- or ?h screws. - 2 P8 screws that (a) are nppropriatc for the nvwnting surface fwood, sheet metal, plaster, Stc.) and (b) will. hold 5% pound. Step 1. Route the wiring fl,om the control corso!c to the Dlace where W-III want the baffle. Step 2. Fasten the hanger bracket to the mounting surfare, using appropriate screws (see the Parts List above). Pollow Steps b through 6 on page 1. OUTLET BOX PAN-HEAD SCREW BRACKET 6-32 SCREWS (PROVIDED BY THE CUSTOMER) BAFFLE ASSEMBLY PAGE 2 RadioFans.CN 收音机爱 好者资料库