10BCrossover Programming Boards 电路图.pdf
《10BCrossover Programming Boards 电路图.pdf》由会员分享,可在线阅读,更多相关《10BCrossover Programming Boards 电路图.pdf(1页珍藏版)》请在收音机爱好者资料库上搜索。
1、These two boards were used on the original 10B-LR (Linkwitz-Riley) crossover with main board 10B-LRB/0.0 One type of board is provided for the High Pass filter and a totally different type of board for the Low Pass filter. The two boards are not interchangeable. Each board contains two 1% resistors.
2、 Two Low pass boards and two High Pass boards are required for each crossover channel board, and thus four of each type of board are required for a dual channel 10B-LR crossover. This board is used with the 2nd version of the 10B-LRB. The same board is used in both High Pass and Low Pass filter sect
3、ions. Two of each board are used in the High Pass filter, and two are used in the Low Pass filter for a total of four boards for each crossover channel, and 8 boards for a two channel 10B-LR crossover. 10B-LR CROSSOVER Using New Style Programming Boards (10B-LRPB) in Older 10B-LR Crossovers Two of t
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 10B Crossover Programming Boards 电路图 10
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


