Neve 1058 Channel Amplifier 电路图.pdf
《Neve 1058 Channel Amplifier 电路图.pdf》由会员分享,可在线阅读,更多相关《Neve 1058 Channel Amplifier 电路图.pdf(12页珍藏版)》请在收音机爱好者资料库上搜索。
1、V. - *- - Channel amplifi er type 1058 is designed to accept signals from microphone and line sources and raise them to 0 dBm for feeding a 600 ohm load. Low noise and distortion and generous overload performance are important features of this amplifi er. High, mid (presence) and low frequency contr
2、ols are included. A ten position input sensitivity switch covers the range 0 to -80 dBm. Two inputs are provided for line and microphone use. The line input is selected on the fi rst three positions of the sensitivity switch (0 to -20 dBm). The microphone input is selected on the remaining 7 positio
3、ns (-20 to -80 dBm). The amplifi er is housed in a completely screened case with removable side panels and is fi tted with runners to slide between the rails of the I.S.E.P. (International Standard Equipment Practice) modular system. All con nections are made on a multi-way in-line connector socket
4、at the rear which engages with a mating plug when the amplifi er is pushed home into the console desk or frame. Individual plug-in printed circuit amplifi ers are used for each stage. The sensitivity switch operates by varying both feedback and attenuation to maintain wide dynamic range at all setti
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Neve 1058 Channel Amplifier 电路图
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


