Qsc - Pl10 电路图.pdf

《Qsc - Pl10 电路图.pdf》由会员分享，可在线阅读，更多相关《Qsc - Pl10 电路图.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、he PowerLight 1.0 is an advanced professional audio amplifier featuring uncompromised audio performance. A new high frequency power supply, utilizing QSCs PowerWave Switching Technology, has been combined with the rugged audio amplification circuits of traditional QSC amplifiers to produce an amplif

2、ier with incredible reliability, thermal capacity and audio performance. The PowerLight 1.0 is rated at 210 watts/channel into 8 ohms, 350 watts/channel 1675 MacArthur Boulevard Costa Mesa, California 92626-1468 USA Phone: 714/754-6175 Fax: 714/754-6174 PowerLight into 4 ohms, and 500 watts/channel

3、into 2 ohms making it ideal for powering midrange and high frequency drivers and smaller, passive, full-range speaker systems. Increased power supply regulation maintains excellent low impedence performance. Outstanding audio performance and reliability, high efficiency design, networkability, and l

4、ight weight make this amplifier ideal for all critical sound system applications. 500 watts per channel at 2 ohms 350 watts per channel at 4 ohms (guaranteed minimum specs) Advanced thermal management system Clip Limiter (user defeatable) reduces distortion, protects loud speakers PowerWave Switchin

5、g Technologyfor improved audio performance Detented gain controls with 2 dB steps for easy resetting Comprehensive LED status arrays Full complementary class AB output circuit for low distortion Variable speed fan, for quiet operation DC, sub audio, and thermal overload protection Patented Output Av

6、eraging short- circuit protection Neutrik ”Combo“ (XLR a green LED power-on indicator; a yellow LED standby indicator and a red protect mode indica- tor. Each channel shall have the following controls and displays: A front panel detented gain control, with 11 gain settings: 32 dB, 30 dB, 28 dB, 26 d

7、B, 24 dB, 22 dB, 20 dB, 18 dB, 14 dB, 8 dB, -; a recessed front panel clip limiter defeat switch; a green signal present LED triggering at -30 dB; two yellow LED output indicators, triggering at -20 dB and -10 dB; a red LED showing true amplifier clipping. The output connectors for each channel shal

8、l include a “touch proof” bind- ing post, accepting banana plug or up to 7 AWG (4mm) wire. Connector terminals are arranged to allow bridge mono connection. The rear panel input shall provide barrier strip and Neutrik “Combo” con- nectors for each channel. The XLR input shall be wired with pin 2 hig

9、h, the 1/4 RTS input shall be wired with tip positive, ring negative, and sleeve grounded. Inputs shall be electronically balanced, with a minimum impedance of 10 kilohms per side, and a common mode rejection of at least 50 dB from 20 Hz to 20 kHz. A High Density 15 Pin Data Port connector shall car

10、ry both audio and am- plifier operational status signals to and from a QSC MultiSignal Proces- sor. Switches shall be provided for stereo-bridging and parallel inputs. A two position barrier strip, on the rear panel, shall be used for remote AC power control. A contact closure shall place the amplif

11、ier in standby mode, when the front panel power switch is in the on position. The front panel power switch shall function as a master switch that removes all AC power. Each channel shall be capable of meeting the following performance cri- teria with both channels driven: Sine-wave output power of 2

12、00 watts into eight ohms, and 325 watts into four ohms, 20 Hz to 20 kHz, with less than 0.1% THD. Frequency response at 3 dB below rated power shall be 20 Hz to 20 kHz within 0.15 dB. The voltage gain shall be 40, equivalent to 32 dB, and the input sensitivity shall be 1.00 Vrms. The signal to noise

13、 ratio over the range of 20 Hz to 20 kHz shall exceed 108 dB relative to full output. IHF damping factor shall exceed 350. The amplifier chassis shall occupy two rack spaces, with provision for securing the rear corners. Depth from mounting surface to tips of rear supports shall be 17.9 (45.5 cm). Weight shall not exceed 18 lbs. (8.2 kg.). The amplifier shall be the QSC Audio Products PowerLight 1.0. RadioFans.CN 收音机爱 好者资料库