Qsc - Hubmanual 电路图.pdf
《Qsc - Hubmanual 电路图.pdf》由会员分享,可在线阅读,更多相关《Qsc - Hubmanual 电路图.pdf(6页珍藏版)》请在收音机爱好者资料库上搜索。
1、QE 16/0 16-Port 10BASE-T Ethernet Hub for QSControl2 Audio Control A blinking green light indicates network activity. Uplink Switch (Port 16)Slide switch: left = Normal mode; right = Uplink mode RJ-45 PortsConfigurable as 16 normal UTP ports or 15 normal UTP ports plus one UTP uplink port (Port 16).
2、 BNC and AUI PortsBNC or AUI for connection to a LAN segment using different media. IEC connectorFor AC power cord. The internal power supply automatically senses 90250 VAC. ON/OFF power switch Features: Allows interconnection of Thin (BNC) and UTP segments without other intermediate media conversio
3、n devices. Connects up to 16 UTP 10BASET segments and one Thin (BNC) and/or one Thick (AUI) Ethernet segment. Detects network collisions and alerts all participating host devices. Amplifies and re-times received signals and transmits the signals to attached host devices in the event of a collision.
4、Preamble regeneration, signal retiring and restoration, extension of fragmented packets and jabber function for automatic partitioning to isolate network failure. Global power, collision, partition LEDs and individual port Link/RX or Link/Activity LED to aid network diagnosis and management. Perform
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Qsc Hubmanual 电路图
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


