Neve 8816_User_Manual_Iss6_5 电路图.pdf

《Neve 8816_User_Manual_Iss6_5 电路图.pdf》由会员分享，可在线阅读，更多相关《Neve 8816_User_Manual_Iss6_5 电路图.pdf（40页珍藏版）》请在收音机爱好者资料库上搜索。

1、Neve 8816 16:2 Summing Mixer User Manual 527 - 361 Issue 6.5 The 8816 is a 16:2 summing mixer with comprehensive input, mixing and monitoring functions, with VU meters, remix and Recall as standard. In addition to the standard 8816 there is also a digital outputs option and an optional fader pack. R

2、adioFans.CN 收音机爱 好者资料库 88 Series Outboard / 8816 Summing MixerIssue 6.5 Health SDIF2 DSD data only, SDIF3 DSD data with embedded clock. - 24 - 88 Series Outboard / 8816 Summing MixerIssue 6.5 Firmware Upgrades In order to get the most from your Neve unit, the latest firmware should be installed. Upg

3、rading your software is a simple process with on screens prompts to guide you. Start the Recall software. On the main screen, right-click the window title bar (Mac users select Recalls) Click Upgrade Firmware. Select the file to transfer. You will be prompted about removing other units. When updatin

4、g units, only the unit that is being updated should be connected via USB. All other units should have their USB disconnected. Even if you are updating two units of the same model, they should be connected individually and updated in two separate operations. If more than one unit is connected via USB

5、 when the Update is about to be performed, a screen will prompt you to disconnect the other units. A prompt screen will confirm the software number +14dB, +18dB or +22dB relative to +4dBu. The headroom is defined as the number of dBs above +4dBu before the ADC clips. The clip led within the left and

6、 right output meter will light if the selected input level is exceeded for more than 1 sample. The headroom can be changed by accessing the switches through two holes on the A/D card, labelled HR and +18 UP +14 DN, indicated left. +14 dB Both switches in the down position. +18 dB HR switch down, and +18 From the /System Library/Extensions folder, move Neve8816.kext to the Trash (move this file, regardless of the actual outboard units you may have connected via USB) From the /Library/Receipts folder, move Neve Recall.pkg to the Trash. You will now be able to install the new version. - 37 -