Qsc - Dpx4 电路图.pdf

《Qsc - Dpx4 电路图.pdf》由会员分享，可在线阅读，更多相关《Qsc - Dpx4 电路图.pdf（1页珍藏版）》请在收音机爱好者资料库上搜索。

1、1675 MacArthur Boulevard Costa Mesa, CA 92626 Ph: 800/854-4079 or 714/957-7100 Fax: 714/754-6174 email: R E M O T E R A C K M O U N T I N G B R A C K E T FEATURES Allows remote rack mounting of up to four two-channel accessory modules Up to eight channels of processing in 3 rack spaces Adjustable ra

2、ck ears for variable mounting depth Additional holes for securing cabling with wire ties COMPATIBLE ACCESSORY MODELS DSP-3,DSP-4 and future DataPort accessory modules. BASIC DESCRIPTION The DPX-4 allows remote rack mounting of QSC DataPort-compatible accessory modules such as the DSP-3 and DSP-4 dig

3、ital signal processors. The bracket allows accessory modules to be used in a standalone configuration with QSC four-channel,PowerLight,or non- DataPort amplifiers, including non-QSC amplifiers. As many as four modules can be mounted to the bracket. The bracket fits a standard 19 equipment rack and o

4、ccupies 3 rack spaces.The top flange has sets of holes for securing your cabling with wire ties.The bracket may be mounted on either the front or rear rails of an equipment rack. The rack ears are adjustable, so its mounting depth can range from approximately 1.75 in (45 mm) to 4.72 in (120 mm). The

5、 modules DataPort connector is accessible through the rectangular opening in the bracket. Connectors, switches, LEDs, and other features located on the “outward”side of an accessory module are accessible even when the accessory is mounted to the bracket. The interconnections an accessory module requires depend on the type of module and the type of amplifier it is used with. Accessories such as the DSP-3 and DSP-4 have their own audio signal inputs. DPX-4 Spec Sheet 092002 RadioFans.CN 收音机爱 好者资料库