Jvc-KSF-171-Service-Manual(1) 电路图 维修手册.pdf

《Jvc-KSF-171-Service-Manual(1) 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Jvc-KSF-171-Service-Manual(1) 电路图 维修手册.pdf（24页珍藏版）》请在收音机爱好者资料库上搜索。

1、SERVICE MANUAL COPYRIGHT 2003 VICTOR COMPANY OF JAPAN, LTD. No.49774 2003/01 KS-F171 CASSETTE RECEIVER 49774200301 KS-F171 TABLE OF CONTENTS 1Important Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 2Disass

2、embly method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 3Adjustment method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3、 1-12 4Description of major ICs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16 Area Suffix U - Other Areas S.BASS SEL DISP RadioFans.CN 收音机爱 好者资料库 KS-F171 1-2 (No.49774) SECTION 1 Important Safety Precautions 1.1 Safe

4、ty Precautions ! Burrs formed during molding may be left over on some parts of the chassis. Therefore, pay attention to such burrs in the case of preforming repair of this system. RadioFans.CN 收音机爱 好者资料库 KS-F171 (No.49774)1-3 SECTION 2 Disassembly method 2.1 Main body 2.1.1Removing the front panel a

5、ssembly (See Fig.1) (1) Press the release button and remove the front panel as- sembly. Fig.1 2.1.2Removing the bottom cover (See Fig.2) Prior to performing the following procedure, remove the front panel assembly. (1) Turn the body upside down. (2) Insert a screwdriver under the joints to release t

6、he two joints a on the left side, the two joints b on the right side and the joint c on the back of the body, then remove the bottom cover from the body. CAUTION: When releasing the joint c using a screwdriver, do not damage the board. Fig.2 2.1.3Removing the front chassis (See Fig.3) Prior to perfo

7、rming the following procedure, remove the front panel assembly and bottom cover. (1) Remove the screw A on each side of the body. (2) Release the two joints d and the two joints e on the sides, then remove the front chassis toward the front. Fig.3 Front panel assembly Release button Bottom cover Joi

8、nt b Joint b Joint c Joint a Joint a Joint d Front chassis A Joint e Joint dJoint e RadioFans.CN 收音机爱 好者资料库 KS-F171 1-4 (No.49774) 2.1.4Removing the heat sink (See Fig.4) Prior to performing the following procedure, remove the front panel assembly. (1) Remove the two screws B and two screws C attach

9、ing the heat sink on the left side of the body, and remove the heat sink. Fig.4 2.1.5Removing the rear panel (See Fig.5 ) Prior to performing the following procedure, remove the front panel assembly and bottom cover. (1) Remove the two screws D, one screw E and three screws F attaching the rear pane

10、l on the back of the body. Fig.5 2.1.6Removing the main board (See Fig.6) Prior to performing the following procedure, remove the front panel assembly, bottom cover, front chassis, heat sink and rear panel. (1) Remove the two screws G attaching the main board on the top chassis. (2) Disconnect the t

11、wo connectors CN901 and CN721 on the main board from the cassette mechanism assembly. Fig.6 Heat sink CBC D FF E D G G Main board CN901 CN721 KS-F171 (No.49774)1-5 2.1.7Removing the cassette mechanism assembly (See Fig.7) Prior to performing the following procedure, remove the front panel assembly,

12、bottom cover, front chassis, heat sink, rear panel and main board. (1) Remove the four screws H attaching the cassette mecha- nism assembly from the top chassis. Fig.7 2.1.8Removing the head amplifier board (See Fig.8) Prior to performing the following procedure, remove the front panel assembly, bot

13、tom cover, front chassis, heat sink, rear panel, main board and cassette mechanism assembly. (1) Disconnect the wire from CJ901 on the head amplifier board. (2) Remove the one screw J attaching the head amplifier board. (3) Move the head amplifier board in the direction of the arrow to release the t

14、wo joints f, the head amplifier board can be removed. Fig.8 H H HH Top chassis Cassette mechanism assembly joint f J CJ901 Head amplifier board To head relay board joint f KS-F171 1-6 (No.49774) 2.1.9Removing the relay board (See Fig.9) Prior to performing the following procedure, remove the front p

15、anel assembly, bottom cover, front chassis, heat sink, rear panel, main board and cassette mechanism assembly. (1) Disconnect the wire from CP722 on the relay board. (2) Remove the one screw K attaching the relay board. (3) Move the relay board in the direction of the arrow to release the joint g, t

16、he relay board can be removed. Fig.9 2.1.10 Removing the mecha bracket (See Fig.10) Prior to performing the following procedure, remove the front panel assembly, bottom cover, front chassis, heat sink, rear panel, main board, cassette mechanism assembly, head am- plifier board and relay board. (1) R

17、emove the four screws L attaching the mecha bracket. Fig.10 joint g K CP722Relay board Mecha bracket L L L L KS-F171 (No.49774)1-7 2.1.11 Removing the switch (LCD +Vcc 5Ground 6Output 2 7Negative feed back 2 8Input 2 KS-F171 (No.49774)1-23 (No.49774) AV & MULTIMEDIA COMPANY 10-1,1chome,Ohwatari-machi,Maebashi-city,371-8543,Japan VICTOR COMPANY OF JAPAN, LIMITED 200301WPC Printed in Japan KS-F171