Philips-AZ-1305-Service-Manual(1) 电路图 维修手册.pdf
《Philips-AZ-1305-Service-Manual(1) 电路图 维修手册.pdf》由会员分享,可在线阅读,更多相关《Philips-AZ-1305-Service-Manual(1) 电路图 维修手册.pdf(20页珍藏版)》请在收音机爱好者资料库上搜索。
1、CD SoundmachineAZ1300 AZ1305 all versions Handling Chip Components and Safety .1 - 1 Technical Specification Tuner: -programs preset radio stations. 3 MODE - selects different play modes: e.g. REPEAT or SHUFFLE (random) order. 4 VOLUME 3 , 4 - to adjust volume level. PRESET+,-(up, down) - selects a
2、preset radio station. 5 Display - shows the status of the set. 6 2; - starts or pauses CD playback. 9 - to stop playback or erase a CD program. SEARCH, CD: - searches backward and forward within a track; - skips to the beginning of a current track/ previous/ later track. RADIO: -(down, up) tunes to
3、radio stations. 7 DBB (Dynamic Bass Boost) - activates a more vivid bass response. 8 POWER slider - selects CD/MW / FM/ OFF function and also the power off switch (OFF). BACK PANEL (See 1) 9 Telescopic aerial - improves FM reception. 0 Battery compartment - for 6 batteries, type R-14, UM2 or C-cells
4、. ! AC MAINS - inlet for mains lead. REMOTE CONTROL (for AZ1305 model only) 1 VOLUME 3 , 4 - adjusts volume level. 2 SHUFFLE - plays all CD tracks in random order. 3 2; - starts or pauses CD playback. 4 SEARCH 5 , 6 - searches backwards/ forwards within a track. 5 PRESET+,-(up, down) - selects a pre
5、set radio station. 6 TUNING, (down, up) - tunes to tuner stations. 7 9 - to stop playback; - erases a CD program. 8 , - skips to the beginning of a current track previous/ subsequent track. 9 REPEAT - repeats a track /program/ entire CD. CAUTION Use of controls or adjustments or performance of proce
6、dures other than herein may result in hazardous radiation exposure or other unsafe operation. POWER SUPPLY Whenever convenient, use the AC power supply to conserve battery life. Make sure you remove the power plug from the set and wall outlet before inserting batteries. Batteries (not included) Inse
7、rt 6 batteries, type R-14, UM-2 or C-cells, (preferably alkaline) with the correct polarity. (See 6) Remote control (AZ1305 model only) Insert 2 batteries, type AAA, R03 or UM4 (preferably alkaline). (See 8) IMPORTANT! Incorrect use of batteries can cause electrolyte leakage and will corrode the com
8、partment or cause the batteries to burst. Do not mix battery types: e.g. alkaline with carbon zinc. Only use batteries of the same type for the set. When inserting new batteries, do not try to mix old batteries with the new ones. Batteries contain chemical substances, so they should be disposed of p
9、roperly. Using AC Power 1.Check if the AC power supply, as shown on the type plate located on the bottom of the set, corresponds to your local power supply. If it does not, consult your dealer or service centre. 2.Connect the mains lead to the wall socket. 3.To disconnect the mains supply, unplug th
10、e set from the wall socket. This set complies with the radio interference requirements of the European Community. For users in the U.K., please follow the boxed instructions Important notes. on this sheet. BASIC FUNCTIONS Switching on and off and selecting function 1.To switch on, adjust the POWER s
11、lider to select: CD, MW (AM), FM function, and operate the respective function controls. 2.To switch off, adjust the POWER slider to select OFF . Note : The DBB setting, tuner presets and the volume level (maximum to 20) will be retained in the sets memory. Adjusting volume and sound (See 2) 1.Adjus
12、t the volume with the VOLUME controls. Display shows the volume level in number from 0-32. 2.Press DBB once or more to select dynamic bass boost on or off. Display: shows when activated. EnglishCONTROLPOWER SUPPLY CONNECTIONS AND CONTROLS 3 - 2 Programming track numbers In the stop position, select
13、and store your CD tracks in the desired sequence. Up to 20 tracks can be stored in the memory. 1.Press SEARCHor on the set to select your desired track number. 2.Press PROG. Display: PROG, Prog briefly and your selected track number. (See 5) If you attempt to program without first selecting a track
14、number, noSE is shown. 3.Repeat steps 1-2 to select and store all desired tracks. Display: FULL if you try to program more than 20 tracks. Reviewing the program In the stop position, press and hold PROG until the display shows all your stored track numbers in sequence. Erasing a program You can eras
15、e the program by either: pressing 9twice CLr is displayed briefly and PROG disappears. You select MW / FM function. Open the CD door. SAFETY to start playback. dAtA if your CD contains non-audio i.e. data files. 5.To pause playback press 2;. Press 2;again to resume play. Display:1flashes during paus
16、e. 6.To stop CD playback, press the 9button. Note : CD play will also stop when: - the CD door is opened - the CD has reached the end - you select MW / FM function. Selecting a different track Press SEARCHor once or repeatedly to select your track. In the pause / stop position, press.2; to start pla
17、yback. Finding a passage within a track 1.Press and hold SEARCHor . The CD is played at high speed and low volume. 2.When you recognize the passage you want, releaseor to resume normal playback. Note : During a CD program or if SHUFFLE/ REPEAT active, searching is only possible within a track. Diffe
18、rent play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback, and combine the modes with PROG. (See 4) (SHUFFLE) - tracks of the entire CD/ program are played in random order (SHUFFLE REPEAT ALL) - to repeat the entire CD/ program continuously in ran
19、dom order (REPEAT ALL) - repeats the entire CD/ program (REPEAT) - plays the current track continuously 1.To select play mode, press MODE once or more. 2.Press2;to start playback if in the stop position. 3.To select normal playback, press MODE repeatedly until the various modes are no longer display
20、ed. You can also press the 9button to cancel your play mode. DIGITAL TUNERDIGITAL TUNERCD PLAYERCD PLAYER CD PLAYER SAFETY & MAINTENANCETROUBLESHOOTING Environmental information We have done our best to reduce the packaging and make it easy to separate into 3 materials: cardboard, expandable polysty
21、rene, polyethylene. Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging, exhausted batteries and old equipment. If a fault occurs, first check the points listed below before taking the
22、 set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service centre. WARNING: Do not open the set as there is a risk of electric shock! Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee. CONNECTI
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Philips-AZ-1305-Service-Manual1 电路图 维修手册 Philips AZ 1305 Service Manual 维修 手册
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


