Philips-FWD-5-Service-Manual(1) 电路图 维修手册.pdf

《Philips-FWD-5-Service-Manual(1) 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Philips-FWD-5-Service-Manual(1) 电路图 维修手册.pdf（100页珍藏版）》请在收音机爱好者资料库上搜索。

1、PCS 103 795 FW-D5/21/21M/22/30/37 TABLE OF CONTENTS Page Location of pc boards fr Reparaturen sind Original-Ersatzteile zu verwenden. I Le norme di sicurezza esigono che lapparecchio venga rimesso nelle condizioni originali e che siano utilizzati i pezzi di ricambio identici a quelli specificati. Af

2、ter servicing and before returning set to customer perform a leakage current measurement test from all exposed metal parts to earth ground to assure no shock hazard exist. The leakage current must not exceed 0.5mA. CLASS 1 LASER PRODUCT 3122 110 03420 GBWarning ! Invisible laser radiation when open.

3、 Avoid direct exposure to beam. SVarning ! Osynlig laserstrlning nr apparaten r ppnad och sprren r urkopplad. Betrakta ej strlen. SFVaroitus ! Avatussa laitteessa ja suojalukituksen ohitettaessa olet alttiina nkymttmlle laseristeilylle. l katso steeseen! DKAdvarse ! Usynlig laserstrling ved bning nr

4、 sikkerhedsafbrydere er ude af funktion. Undg udsaettelse for strling. 1-6 PCS 90 115 2-1 PCS 103 798 7 English Accessories(Supplied) Remote control Batteries (two AA size) for remote control AM loop antenna1 FM wire antenna AC power cord For model FW-D5 only CS-05 speaker package (includes one pair

5、 of surround speakers and one centre speaker) CVBS cable cinch GENERAL INFORMATIONSAFETY INFORMATION Safety Information Before operating the system, check that the operating voltage indicated on the typeplate (or the voltage indication beside the voltage selector) of your system is identical with th

6、e voltage of your local power supply. If not, please consult your dealer. The typeplate is located at the rear of your system. When the system is switched on, do not move it around. Place the system on a solid base (e.g. a cabinet). Place the system in a location with adequate ventilation to prevent

7、 internal heat build-up in your system. Allow at least 10 cm (4 inches) clearance from the rear and the top of the unit and 5 cm (2 inches) from each side. Do not place the system on soft carpet that will cover the ventilation hole at the bottom. Do not expose the system to excessive moisture, rain,

8、 sand or heat sources. Under no circumstances should you repair the system yourself, as this will invalidate the warranty! IMPORTANT:IMPORTANT: PLEASE NOTE THAT THEPLEASE NOTE THAT THE VOLTAGE SELECTORVOLTAGE SELECTOR LOCATED AT THE REAR OFLOCATED AT THE REAR OF THIS SYSTEM IS PRESET ATTHIS SYSTEM I

9、S PRESET AT 220V FROM THE FACTORY.220V FROM THE FACTORY. FOR COUNTRIES THATFOR COUNTRIES THAT OPERATE AT 110V, PLEASEOPERATE AT 110V, PLEASE ADJUST TO 110V BEFORE YOUADJUST TO 110V BEFORE YOU SWITCH ON THE SYSTEM.SWITCH ON THE SYSTEM. General Information The typeplate (which contains the serial numb

10、er) is located at the rear of the system. Recording is permissible if copyright or other rights of third parties are not infringed. Environmental Information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polyst

11、yrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

12、If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens of the CD/DVD unit inside the system. Should this occur, the player will not operate normally. Leave the power on for about one hour with no disc in the system until

13、normal playback is possible. Electrostatic discharge may cause unexpected problems. See whether these problems disappear if you unplug the AC power cord and plug it in again after a few seconds. To disconnect the system from the power supply completely, remove the AC power plug from the wall socket.

14、 8 English PREPARATION Rear Connections AM ANTENNA SUB- WOOFER OUT LINE-OUT AUDIO OUT L R HIGH POWER SUBWOOFER S U B W O O F E R L E V E L C O N T R O L STANDBY ON CUT OFF FREQUENCY 60Hz150Hz MINMAX AUDIO IN B REAR SURROUND L surr. R surr. L + R + D A C FRONT LR L + R + F surr. L surr. R SURROUND OU

15、TAUX/CDR-IN S-VIDEO OUT (Y/C) VIDEO OUT (CVBS) AUDIO DIGITAL OUT W G HI K J AC MAINS M VOLTAGE SELECTOR 110V- 127V 220V- 240V L E CENTER CENTER + FM ANTENNA 75 2-2 PCS 103 799 9 English PREPARATION F Subwoofer Out Connection Connect the optional active subwoofer to the SUBWOOFER OUT terminal. The su

16、bwoofer reproduces just the low bass sound effect (e.g. explosions, the rumble of spaceships, etc.). Be sure to follow the instructions supplied with the subwoofer. G Wireless Surround Out Connection(for model FW-D5 only) You may connect the transmitter of the wireless rear speakers (not supplied) t

17、o the SURROUND OUT terminal. Note: Availability of a wireless transmitter and its peripherals are subjected to the approval of local authorities. Please check with the respective local safety or approving authority. CAUTION: For optimal sound performance, it is recommended to use the supplied speake

18、rs. Do not connect more than one speaker to any one pair of +/- speaker terminals. Do not connect speakers with impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual. D Centre Speaker Connection (for model FW-D5 only) Connect the black (non-marked) wir

19、es to the black CENTER terminal and the blue (marked wires) to the blue CENTER terminal. E Rear Surround Speakers Connection(for model FW-D5 only) Connect the black (non-marked) wires to the black REAR SURROUND terminals and the coloured (marked) wires to the grey REAR SURROUND terminals. H Line Out

20、 Connection (wireless ready) You can connect the audio left and right LINE OUT terminals to a optional CD Recorders ANALOGUE IN terminals. This allows you to record in an analogue format. You can also install additional optional front active speakers away from the system (e.g. in another room) to re

21、duce the inconvenience of running long speaker wires across rooms. You can place as many remote speakers as you like provided they operate at the same radio frequency. Connect the wireless radio frequency transmitter to the LINE OUT terminals. Place the active speakers at your preferred location. Be

22、 sure to follow the instructions supplied with the active speakers. I Connecting other equipment to your system You can connect the audio left and right OUT terminals of a TV, VCR, Laser Disc player, DVD player or CD Recorder to the AUX/CDR IN terminals at the rear of the system. A AM Loop Antenna C

23、onnection Connect the supplied loop antenna to the AM ANTENNA terminal. Place the AM loop antenna far away from the system and adjust its position for the best reception. B FM Wire Antenna Connection Connect the supplied FM wire antenna to the FM ANTENNA 75 terminal. Adjust the position of the FM an

24、tenna for the best reception. Outdoor Antenna For better FM stereo reception connect an outdoor FM antenna to the FM ANTENNA 75 terminal using a 75 coaxial wire. C Speakers Connection Connect the right speaker to Front terminal R, with the coloured wire to + and the black wire to -. Connect the left

25、 speaker to Front terminal L, with the coloured wire to + and the black wire to -. Clip the stripped portion of the speaker wire as shown. unlocklock 12 mm 10 English J Video Out Connection Connect the VIDEO OUT (CVBS) terminal at the rear of the system to the TV or VCR VIDEO IN terminal for viewing

26、 or recording. Note: You can also choose to connect the S-VIDEO OUT (Y/C) terminal at the rear of the system to the S-VIDEO IN of the TV using an optional S-VIDEO cable. K Audio Digital Out Connection You can record the digital sound from the CD/DVD, through this output, on any audio equipment with

27、digital input (e.g. CD Recorder, Digital Audio Tape (DAT) deck, Digital to Analogue Converter and Digital Signal Processor). Connect one end of the cinch cable (not supplied) to the DIGITAL OUT socket and the other end to the audio equipments digital input. When connecting the cinch cable, make sure

28、 it is fully inserted. L Adjusting the Operating Voltage (not available for all versions) Before connecting the AC power cord to a wall outlet, make sure that the voltage selector at the rear of the system is set to the local power line voltage. If not, reset the selector before connecting to the wa

29、ll outlet. M AC Power Supply After all other connections have been made, connect the AC power cord to the system and to the wall outlet. PREPARATION Inserting batteries into the Remote Control Insert the batteries (Type R06 or AA) into the remote control as shown in the battery compartment. To avoid

30、 damage from possible battery leakage, remove dead batteries or batteries that will not be used for a long time. For replacement, use type R06 or AA batteries. 2-3 PCS 103 800 11 English CONTROLS R E T U R N P E R S O N A L V E C D S C D B B DISC CHANGE CD 1CD 2CD 3 OPENCLOSE STANDBY ON DC 3CHANGER

31、DVD MINI HIFI SYSTEM DIMPROG POWER SAVE IR SENSOR RDS/CD TEXT NEWS/T.A. 9 CLOCK/ TIMER VOLUME AXISOK DVD MENU DVD SOUND JOGDVD JOG PLAYBACK MODE DVD VCD CD OPEN/CLOSE MIC LEVEL MIC DVD / VCD / CD PLAYBACK 0 P3P6P1P2P5P4 FTSTITLECHAP.SLEEPSLEEPDIMTIMERLWFMA M W TUNERDVDCDAUX A - B P B C 1 3 4 5 8 67

32、! 132 465 798 VOLUME 0 2 AUX/CDR TV/AV DVDCDTUNER SHUFFLEREPEAT FTS * fi fl ! DSCVECDBBTIMER # BANDVCD CDCD 1 2 3CDR2 LEFTCENTERRIGHT SURRSURR SURROUND CONTROL ! 0 3 STOPCLEARSEARCHTUNINGPLAY PAUSEPREVNEXTSIDE PRESET S C A N CHANNEL 5.1CH / STEREO / SURR / 3D DVDOK OSDSURR. MENU PROG.AUDIOA-BKARAOKE

33、 ECHOKEY CONTROL STOPPLAY when the system is in standby or demonstration mode. EASY SET will be displayed, and followed by TUNER and then AUTO. EASY SET will start searching for all radio on FM band and then followed by radio stations on MW band. All available radio stations with sufficient signal s

34、trength will be stored. Up to 40 presets may be stored. Notes: EASY SET will start with the FM band, if there are still presets available, the system will continue to store the MW band. When EASY SET is used, all previously stored radio stations will be replaced. The last preset radio station will a

35、ppear on the display when EASY SET is completed. Switching the system ON Press DVD, CD, TUNER or AUX. You can also switch on the system by pressing any one of the CD DIRECT PLAY buttons. Switching the system to standby mode Press STANDBY ON or B on the remote control. The system will switch to stand

36、by mode. Selecting the Source Press the desired source selection button: DVD, CD, TUNER or AUX. The display indicates the selected source. Note: For an external source, make sure you have connected the audio left and right OUT terminals of the external equipment (TV, VCR, Laser Disc player, DVD play

37、er or CD Recorder) to the AUX/ CDR IN terminals. R E T U R N P E R S O N A L V E C D S C D B B STANDBY ON DVD MINI HIFI SYSTEM DIMPROG POWER SAVE IR SENSOR RDS/CD TEXT NEWS/T.A. CLOCK/ TIMER VOLUME AXISOK DVD MENU SOUND JOGDVD JOG P3P6P1P2P5P4 CHAP.CHAP.SLEEPSLEEPDIMTIMERLWFMA M W TUNERDVDCDAUX A -

38、B P B C BANDVCD CDCD 1 2 3CDR LEFTCENTERRIGHT SURRSURR STOPCLEARSEARCHTUNINGPLAY PAUSEPREVNEXTSIDE PRESET S C A N CHANNEL DVD SURROUND CONTROL 5.1CH / STEREO / SURR / 3D FTSTITLEFTSTITLE 2-5 PCS 103 802 15 English Dim mode You can select the desired brightness for the display. Press DIM to select DI

39、M 1, DIM 2, DIM 3 or DIM OFF display mode. TheDIM appears on the display. DIM 1, DIM 2, DIM 3 or DIM OFF will be displayed depending on the mode selected. DIM OFF - normal brightness with Spectrum Analyser On P3P6P1P2P5P4 FTSTITLECHAP.SLEEPSLEEPDIMTIMERLWFMA M W DIM 1 - normal brightness with Spectr

40、um Analyser Off P3P6P1P2P5P4 FTSTITLECHAP.SLEEPSLEEPDIMTIMERLWFMA M W DIM 2 - half brightness with Spectrum Analyser On P3P6P1P2P5P4 FTSTITLECHAP.SLEEPSLEEPDIMTIMERLWFMA M W OPERATING THE SYSTEM DIM 3 - half brightness with Spectrum Analyser Off and all LEDs on the system will be switched off. P3P6P

41、1P2P5P4 FTSTITLECHAP.SLEEPSLEEPDIMTIMERLWFMA M W Volume Control Adjust VOLUME to increase or decrease the sound level. For Personal Listening Connect the headphones plug to the n socket at the front of the system. The speakers will be muted. Sound Control For Optimal sound listening, you can only se

42、lect one of the following sound controls at a time : VEC, PERSONAL or DSC . VIRTUAL ENVIRONMENT CONTROL (VEC) The VEC feature enables you to adjust the system to select a type of environment. 1 Press to select the VEC feature. 2 Adjust the JOG to select the desired VEC setting : HALL, CLUB, DISCO, C

43、INEMA, CONCERT or ARCADE. The selected environment is encircled. HALL, CLUB, DISCO, CINEMA, CONCERT or ARCADE will be displayed. PERSONAL SOUND You can store up to 6 personal settings. 1 Press to select the PERSONAL feature. 2 Adjust the JOG to select the desired Personal setting. The selected perso

44、nal setting number will appear on the display. If no name has been stored previously, PERSONAL X will be displayed. X is the setting number. Personal Setting You can adjust the personal setting to your desired level with the JOG control. 1 Press and hold PERSONAL for about 5 seconds to switch on the

45、 personal setting mode. SELECT PRESET NUMBER will be displayed. 2 Adjust the JOG to select the desired preset number for personal setting and press to confirm the selection. ADAPT LOW FREQ LEVEL will be displayed. 3 Adjust the JOG to select the desired Spectrum Analyser band level for low frequency.

46、 The level will increase or decrease between+3 and -3. 4 Press to confirm the selection. ADAPT MID FREQ LEVEL will be displayed, followed by ADAPT HIGH FREQ LEVEL. 16 English OPERATING THE SYSTEM Repeatstep 3 - 4 to select the desired middle and high frequencies of the Spectrum Analyser band levels.

47、 5 You can edit the name for the personal setting. The first character of the setting name will be flashing. 6 Adjust the JOG to select the desired letter, number or symbol. A to Z, 0 to 9 or *, -, +, , /, _. 7 Press to confirm the selection. The next character for editing will be flashing. Repeat s

48、teps 6 - 7 to store up to 10 characters. 8 To store the setting, press PERSONAL again. Before storing the setting, you can press to retrace the steps. To exit without storing the setting, press. Notes: During personal setting, if no button is pressed within 90 seconds, the system will exit personal

49、setting mode automatically. It is not possible to adjust the DBB level during personal setting, USE JOG will be displayed. DIGITAL SOUND CONTROL (DSC) The DSC feature enables you to adjust the system to suit your type of music. 1 Press to select the DSC feature. 2 Adjust the JOG to select the desired DSC setting : OPTIMAL, CLASSIC, TECHNO, VOCAL, ROCK or JAZZ. The selected digital sound is encircled. OPTIMAL, CLASSIC, TECHNO, VOCAL, ROCK or JAZZ will be displayed. Note: For a neutr