Philips-FWC-200-Service-Manual(1) 电路图 维修手册.pdf

《Philips-FWC-200-Service-Manual(1) 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Philips-FWC-200-Service-Manual(1) 电路图 维修手册.pdf（86页珍藏版）》请在收音机爱好者资料库上搜索。

1、CLASS 1 LASER PRODUCT COMPACT DIGITAL AUDIO Service Manual Service Service Service Service Service SPR 00 0054 FW-C200/21/21M/30 TABLE OF CONTENTS Page Location of pc boards fr Reparaturen sind Original-Ersatzteile zu verwenden. I Le norme di sicurezza esigono che lapparecchio venga rimesso nelle co

2、ndizioni originali e che siano utilizzati i pezzi di ricambio identici a quelli specificati. After servicing and before returning set to customer perform a leakage current measurement test from all exposed metal parts to earth ground to assure no shock hazard exist. The leakage current must not exce

3、ed 0.5mA. CLASS 1 LASER PRODUCT 3122 110 03420 GBWarning ! Invisible laser radiation when open. Avoid direct exposure to beam. SVarning ! Osynlig laserstrlning nr apparaten r ppnad och sprren r urkopplad. Betrakta ej strlen. SFVaroitus ! Avatussa laitteessa ja suojalukituksen ohitettaessa olet altti

4、ina nkymttmlle laseristeilylle. l katso steeseen! DKAdvarse ! Usynlig laserstrling ved bning nr sikkerhedsafbrydere er ude af funktion. Undg udsaettelse for strling. 1-6 PCS 90 115 2-1 SPR 00 0057 3 DIGITAL SOUND CONTROL STANDBY-ON PROGRAM DIM FULL AUTO STOP PLAYBACKPLAY/REC MINI HIFI SYSTEM CD1 2 3

5、BANDTAPE 1 2 TAPECDTUNERAUX PRESET TUNING STOPCLEARSEARCHPLAY PAUSEPREVNEXT DISC CHANGE DISC 3 OPENCLOSE DC 3CHANGER 3 CD ROTARY CHANGER SYSTEM CD REWRITABLE COMPATIBLE CD SYNCHRO RECORDING 3 CD ROTARY CHANGER SYSTEM CD REWRITABLE COMPATIBLE CD SYNCHRO RECORDING D B B VIDEO O P T I M A L J A Z Z R O

6、 C K T E C H N O DSC DISC 2DISC 1 RECORD DUBBING A.REPLAY DIGITAL SOUND CONTROL VOLUME CLOCKTIMER MICROPHONE - LEVEL 0 OPEN TAPE 2TAPE 1 OPEN DEMO STOP ! 0 9 1 2 3 4 5 6 7 8 # $ % when the system is in standby or demonstration mode. If the PLUG and PLAY has not been installed before, you can access

7、this feature by switching on the system from the main power outlet. “AUTO INSTALL - PRESS PLAY” will be displayed. 2Press PLAY to start installation. “INSTALL” will be displayed and followed by “TUNER” and then AUTO. ThePROGRAM starts flashing. PLUG and PLAY will start searching for all radio statio

8、ns on FM band and then followed by radio stations on MW band. All available radio stations with sufficient signal strength will be stored. Up to 40 presets may be stored. The last preset radio station will appear on the display when PLUG and PLAY is completed. To exit without storing the PLUG and PL

9、AY, press button (on the system only). Notes: PLUG and PLAY will be reinitiated again during the next power up if : i) PLUG and PLAY installation was not completed. ii) No stereo frequency being detected during PLUG and PLAY, CHECK ANTENNA will be displayed. You can store any radio stations manually

10、 or automatically after PLUG and PLAY. When PLUG and PLAY is used, all previously stored radio stations will be replaced. During PLUG and PLAY, if no button is pressed within 15 seconds, the system will go to demonstration mode (if demonstration mode is enable) Demonstration mode The system has a de

11、monstration mode that shows the various features offered by the system. To disable the demonstration mode Press and hold (on the system only) for 5 seconds when the system is in demonstration mode. DEMO OFF is displayed. The system will switch to standby mode. 2 213 TUNERTAPE 1/2CD SLEEPAUXDIM DSCDB

12、B MUTE REPEATPAUSESHUFFLE CD DIRECT VOLUME 12 English To enable the demonstration mode Press and hold (on the system only) for 5 seconds when the system is in standby mode. The demonstration will begin. Notes: If the demonstration mode has not been disabled, it will resume 5 seconds later after the

13、system switches to standby mode. When the system is switched on from the main power outlet, the CD changer tray may open and close again to initialize the set. Even though the AC power cord is removed from and reconnected to the wall socket, the demonstration will remain off until it is switched on

14、again. Switching the system ON Press CD,TUNER,TAPE or AUX. Press STANDBY-ON in demo. You can also switch on the system by pressing any one of the CD DIRECT PLAY buttons (on system only). Switching the system to standby mode Press STANDBY-ON or B on the remote control. The system will switch to stand

15、by mode. Selecting the Source Press the respective source selection button: CD, TUNER,TAPE or AUX. The display indicates the selected source. Note: For an external source, make sure you have connected the audio left and right OUT terminals of the external equipment (TV, VCR, Laser Disc player, DVD p

16、layer or CD Recorder) to the AUX IN terminals. DIM mode You can select the desired brightness for the display. Press DIM to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode. TheDIM display lights up. DIM 1, DIM 2, DIM 3 or DIM OFF will be displayed depending on the mode selected. DIM OFF - normal

17、brightness with Spectrum Analyzer On DIM 1 - normal brightness with Spectrum Analyzer Off DIM 2 - half brightness with Spectrum Analyzer On DIM 3 - half brightness with Spectrum Analyzer Off and all LEDs on the system will be switched off. Operating the System 2-5 SPR 00 0061 13 English Sound Contro

18、l VOLUME ADJUSTMENT Adjust VOLUME to increase or decrease the sound level. For Personal Listening Connect the headphones plug to the n socket at the front of the system. The speakers will be muted. DIGITAL SOUND CONTROL (DSC) The DSC feature enables you to enjoy special sound effects that have prese

19、t equalizer settings, providing the best music reproduction. Press DSC to select OPTIMAL, JAZZ, ROCK or TECHNO. The Digital Sound Control display panel will light up respectively. “OPTIMAL, JAZZ, ROCK or TECHNO” and the respective flag will be displayed. Note: When OPTIMAL sound is selected, DBB wil

20、l be switched on automatically. DYNAMIC BASS BOOST (DBB) The DBB mode enhances the bass response. Press DBB to switch on bass response. The DBB button lights up. “DBB ON” and the DBB flag will be displayed. To switch off DBB Press DBB again. The DBB button light is switched off. “DBB OFF” will be di

21、splayed. Note: Some CDs or tapes might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume. MUTE (only on remote control) This feature allows you to temporarily switch off the sound of the system without switching off the syst

22、em when you require a moment of silence. Press MUTE on the remote control to switch off the sound. MUTE and the MUTE flag will be displayed. Press MUTE again on the remote control or increase the VOLUME to switch on the sound. Operating the System 14 English Compact Disc Warning! 1)This system is de

23、signed for conventional discs. Do not use any accessories such as disc stabilizer rings or disc treatment sheets, etc., which may damage the disc mechanism. 2)Do not load more than one disc into each tray. 3)When the CD changer is loaded with discs, do not turn over or shake the system. This may jam

24、 the changer. You may load three discs in the CD changer for continuous playback without interruption. Discs for playback This system can play all digital audio disc, finalized digital audio CD-Recordable and finalized digital audio CD-Rewritable format discs. Loading the CD Changer 1Press CD to sel

25、ect CD mode. 2Press OPENCLOSE. The CD changer tray slides out. 3Load a disc with the printed side up in the right tray. You can load another disc in the left tray. To load the third disc, press the DISC CHANGE button. The CD changer tray will rotate until the empty tray is ready for loading. 4Press

26、OPENCLOSE to close the CD changer tray. The total number of tracks and the playing time of the selected disc appear on the display. Note: To ensure good system performance, wait until the CD changer completely reads the disc(s) before proceeding. Disc Direct Play You can play a disc directly by pres

27、sing the DISC 1, DISC 2 or DISC 3 button. The CD player will stop at the end of playback of the selected disc. A lit button indicates that a disc is loaded in the disc tray. A flashing button indicates that a disc is playing. DIGITAL SOUND CONTROL 3 CD ROTARY CHANGER SYSTEM CD REWRITABLE COMPATIBLE

28、CD SYNCHRO RECORDING 3 CD ROTARY CHANGER SYSTEM CD REWRITABLE COMPATIBLE CD SYNCHRO RECORDING STANDBY-ON MINI HIFI SYSTEM CD1 2 3BANDTAPE 1 2 TAPECDTUNERAUX PRESET TUNING STOPCLEARSEARCHPLAY PAUSEPREVNEXT DISC CHANGE DISC 3 OPENCLOSE DC 3CHANGER D B B VIDEO O P T I M A L J A Z Z R O C K T E C H N O

29、DSC DISC 2DISC 1 PROGRAM DIMRECORD DUBBING A.REPLAY DIGITAL SOUND CONTROL VOLUME CLOCKTIMER MICROPHONE - LEVEL DEMO STOP 2 213 TUNERTAPE 1/2CD SLEEPAUXDIM DSCDBB MUTE REPEATPAUSESHUFFLE CD DIRECT VOLUME 2-6 SPR 00 0062 15 English Compact Disc Playing a Disc 1Press to start playback. The disc tray, t

30、rack number and elapsed playing time of the current track appear on the display. To interrupt playback, press. The playing time flashes. To resume playback, press again. 2To stop playback, press . Note: All the available discs will play once, then stop. Disc Change You can change the outer two discs

31、 while the third inner disc is stopped or is playing. 1Press DISC CHANGE. The CD changer tray slides out. 2Replace the discs in the left and right disc trays. If you wish to change the inner disc during playback, press DISC CHANGE again. DISC CHANGE will be displayed. The disc will stop playing. The

32、 CD changer tray will close to retrieve the inner disc and then open again with the inner disc accessible. 3Press OPENCLOSE to close the CD changer tray. Selecting a desired track Selecting a desired track when playback is stopped 1Press or until the desired track appears on the display. 2Press to s

33、tart playback. The selected track number and elapsed playing time appear on the display. Selecting a desired track during playback Press or until the desired track appears on the display. The selected track number and elapsed playing time appear on the display. If you press once it will skip to the

34、beginning of the current track and play the track again. Note: Pressing during shuffling can only skip to the beginning of the current track. Searching for a particular passage during playback Press and hold or until the desired passage is located. The volume will be reduced. Play returns to normal

35、when or is released. Programming Tracks Programming tracks of a loaded disc is possible when playback is stopped. The display will indicate the total tracks stored in the programme. Up to 40 tracks can be stored in the memory in any order. When 40 tracks are stored and you attempt to store another t

36、rack, the display will show “FULL”. 1Load the desired discs in the disc trays. 2Press PROGRAM to start programming. The PROG flag starts flashing. 3Press the CD (CD 123) or DISC 1/2/3 button to select the disc. 4Press or to select the desired track. 5Press PROGRAM to store the track. Repeat steps 3

37、to 5 to store other discs and tracks. 6Press once to end programming. The total number of tracks programmed and total playing time appear on the display. Notes: If the total playing time is more than “99:59“ or if one of the programmed tracks has a number greater than 30, then “-:-” appears on the d

38、isplay instead of the total playing time. If the system is reading the discs, programming is not possible, “READING” will be displayed and followed by DISC X. X is the current read disc number. During programming, if no button is pressed within 20 seconds, the system will exit programme mode automat

39、ically. “SELECT A DISC” will be displayed when programming an empty disc slot. Reviewing the programme Reviewing of the programme is possible only when playback is stopped. Press or repeatedly to review the programmed tracks. Press to exit review mode. 16 English Playing the programme 1Press to star

40、t programme playback. “PLAY PROGRAM” will be displayed. The track number and elapsed playing time of the current track will appear on the display. If you press REPEAT during programme playback, the current track or all programmed tracks will be played repeatedly. “TRACK” or PROGRAM will be displayed

41、. The REP and PROG flags appear on the display. 2Press to stop programme playback. Notes: If you press any of the DISC DIRECT PLAY buttons, the system will play the selected disc and the stored programme will be ignored temporarily. The PROG display also will disappear temporarily from the display.

42、It will reappear when playback of the selected disc ends. REPEAT DISC mode will be cancelled when programme playback begins. Erasing the programme (when playback is stopped) Press . “PROGRAM CLEARED” will be displayed. Note: The programme will be erased when the system is disconnected from the power

43、 supply or when the CD changer tray is opened. Shuffle(only on remote control) In shuffle mode, the system plays all the available discs and their tracks in random order. Shuffle may be used also when tracks are programmed. To shuffle all the discs and tracks 1Press SHUFFLE. “SHUFFLE” will be displa

44、yed. The SHUF flag, the disc and the track selected at random appear on the display. The discs and the tracks will be played in random order until you press. If you press REPEAT during shuffling, the current track or all available discs will be played repeatedly. “TRACK” or “ALL DISC” will be displa

45、yed. The REP and SHUF flags appear on the display. 2Press SHUFFLE again to resume normal playback. The SHUF flag disappears from the display. Note: REPEAT DISC mode will be cancelled when shuffle is selected. Repeat(only on remote control) You can play the current track, a disc or all available disc

46、s repeatedly. 1Press REPEAT on the remote control to select the various repeat modes. “TRACK”, “DISC”, “ALL DISC” or “OFF” will be displayed. The REP flag appears on the display. The selected track, selected disc or all available discs will now be played repeatedly until you press. 2Press REPEAT unt

47、il the OFF mode is displayed to resume normal playback. The REP flag disappears from the display. Notes: REPEAT DISC mode is not available during programme play or shuffle mode. You can also repeat shuffling a programme. i) “TRACK“ or “PROGRAM will be displayed. ii) The REP, PROG, and SHUF flags app

48、ear on the display. Compact Disc 2-7 SPR 00 0063 17 English Tuner Note: For PLUG buttons flashfive seconds to switch off the continuously.demonstration. All lighted buttons are not lit.Press DIM until DIM OFF display mode is shown. Troubleshooting 2-12 SPR 00 0068 3-13-1 SPR 00 0069 DISMANTLING INST

49、RUCTIONS Dismantling of the Cassette Cover 3. Lift up and out 1. Place screw driver (flat side) between the cover & cassette door 2. Twist screw driver Cassette door 1) Take a paper clip or any stiff wire diameter of 1mm -1.5mm and make a marking about 17mm from the tip. 2) Place the set in an upright position and insert the paper clip into the slot on the right side of the Cabinet Rear. 3) With the marking just outside the Cabinet Rear, you sho