Philips-FWC-100-Service-Manual(1) 电路图 维修手册.pdf

《Philips-FWC-100-Service-Manual(1) 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Philips-FWC-100-Service-Manual(1) 电路图 维修手册.pdf（80页珍藏版）》请在收音机爱好者资料库上搜索。

1、CLASS 1 LASER PRODUCT COMPACT DIGITAL AUDIO Service Manual Service Service Service Service Service SPR 00 0001 FW-C100/21/21M/22/30/34/37 TABLE OF CONTENTS Page Location of pc boards fr Reparaturen sind Original-Ersatzteile zu verwenden. I Le norme di sicurezza esigono che lapparecchio venga rimesso

2、 nelle condizioni originali e che siano utilizzati i pezzi di ricambio identici a quelli specificati. After servicing and before returning set to customer perform a leakage current measurement test from all exposed metal parts to earth ground to assure no shock hazard exist. The leakage current must

3、 not exceed 0.5mA. CLASS 1 LASER PRODUCT 3122 110 03420 GBWarning ! Invisible laser radiation when open. Avoid direct exposure to beam. SVarning ! Osynlig laserstrlning nr apparaten r ppnad och sprren r urkopplad. Betrakta ej strlen. SFVaroitus ! Avatussa laitteessa ja suojalukituksen ohitettaessa o

4、let alttiina nkymttmlle laseristeilylle. l katso steeseen! DKAdvarse ! Usynlig laserstrling ved bning nr sikkerhedsafbrydere er ude af funktion. Undg udsaettelse for strling. 1-6 PCS 90 115 2-1 SPR 00 0004 3 DIGITAL SOUND CONTROL STANDBY-ON PROGRAM CLOCKTIMER FULL AUTO STOP MASTER VOLUME TAPE 2 PLAY

5、BACKPLAY/REC TAPE 1 PLAYSTOP.OPENPAUSE RECORDPLAYSTOP.OPENPAUSE MINI HIFI SYSTEM CD1 2 3TAPE 1 2 TAPECDTUNERAUX PRESET TUNING STOPCLEARSEARCHPLAY PAUSEPREVNEXT DISC CHANGE DISC 3 OPENCLOSE DC 3CHANGER VIDEO O P T I M A L J A Z Z R O C K T E C H N O DSC DISC 2DISC 1 DEMO STOP 6 5 4 1 3 2 * when the s

6、ystem is in standby or demonstration mode. If the PLUG and PLAY has not been installed before, you can access this feature by switching on the system from the main power outlet. “AUTO INSTALL - PRESS PLAY” will be displayed. 2Press PLAY to start installation. “INSTALL” will be displayed and followed

7、 by “TUNER” and then AUTO. ThePROGRAM starts flashing. PLUG and PLAY will start searching for all radio stations on FM band and then followed by radio stations on MW and LW bands respectively. All available radio stations with sufficient signal strength will be stored. Up to 40 presets may be stored

8、. The last preset radio station will appear on the display when PLUG and PLAY is completed. To exit without storing the PLUG and PLAY, press button (on the system only). Notes: PLUG and PLAY will be reinitiated again during the next power up if : i) PLUG and PLAY installation was not completed. ii)

9、No stereo frequency being detected during PLUG and PLAY, CHECK ANTENNA will be displayed. You can store any radio stations manually or automatically after PLUG and PLAY. When PLUG and PLAY is used, all previously stored radio stations will be replaced. During PLUG and PLAY, if no button is pressed w

10、ithin 15 seconds, the system will go to demonstration mode (if demonstration mode is enable) Demonstration mode The system has a demonstration mode that shows the various features offered by the system. To disable the demonstration mode Press and hold (on the system only) for 5 seconds when the syst

11、em is in demonstration mode. DEMO OFF is displayed. The system will switch to standby mode. 2 213 TUNERTAPE 1/2CD SLEEPAUXDIM DSCDBB MUTE REPEATPAUSESHUFFLE CD DIRECT VOLUME 12 English To enable the demonstration mode Press and hold (on the system only) for 5 seconds when the system is in standby mo

12、de. The demonstration will begin. Notes: If the demonstration mode has not been disabled, it will resume 5 seconds later after the system switches to standby mode. When the system is switched on from the main power outlet, the CD changer tray may open and close again to initialize the set. Even thou

13、gh the AC power cord is removed from and reconnected to the wall socket, the demonstration will remain off until it is switched on again. Switching the system ON Press CD,TUNER,TAPE or AUX. Press STANDBY-ON in demo. You can also switch on the system by pressing any one of the CD DIRECT PLAY buttons

14、(on system only). Switching the system to standby mode Press STANDBY-ON or B on the remote control. The system will switch to standby mode. Selecting the Source Press the respective source selection button: CD, TUNER,TAPE or AUX. The display indicates the selected source. Note: For an external sourc

15、e, make sure you have connected the audio left and right OUT terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX IN terminals. DIM mode (only on remote control) You can select the desired brightness for the display. Press DIM to select DIM 1, DIM 2,

16、 DIM 3 or DIM OFF display mode. TheDIM display lights up. DIM 1, DIM 2, DIM 3 or DIM OFF will be displayed depending on the mode selected. DIM OFF - normal brightness with Volume Indicator On DIM 1 - normal brightness with Volume Indicator Off DIM 2 - half brightness with Volume Indicator On DIM 3 -

17、 half brightness with Volume Indicator Off Operating the System 2-5 SPR 00 0008 13 English Sound Control VOLUME ADJUSTMENT Press MASTER VOLUME 3 or 4 to increase or decrease the sound level. For Personal Listening Connect the headphones plug to the n socket at the front of the system. The speakers w

18、ill be muted. DIGITAL SOUND CONTROL (DSC) The DSC feature enables you to enjoy special sound effects that have preset equalizer settings, providing the best music reproduction. Press DSC to select OPTIMAL, JAZZ, ROCK or TECHNO. “OPTIMAL, JAZZ, ROCK or TECHNO” and the respective flag will be displaye

19、d. Note: When OPTIMAL sound is selected DBB will be switched on automatically. DYNAMIC BASS BOOST (DBB) The DBB mode enhances the bass response. Press DBB to switch on bass response. “DBB ON” and the DBB flag will be displayed. To switch off DBB Press DBB again. “DBB OFF” will be displayed. Note: So

20、me discs or tapes might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume. MUTE (only on remote control) This feature allows you to temporarily switch off the sound of the system without switching off the system when you req

21、uire a moment of silence. Press MUTE on the remote control to switch off the sound. MUTE and the MUTE flag will be displayed. Press MUTE again on the remote control or increase the MASTER VOLUME to switch on the sound. Operating the System 14 English Compact Disc Warning! 1)This system is designed f

22、or conventional discs. Do not use any accessories such as disc stabilizer rings or disc treatment sheets, etc., which may damage the disc mechanism. 2)Do not load more than one disc into each tray. 3)When the CD changer is loaded with discs, do not turn over or shake the system. This may jam the cha

23、nger. You may load three discs in the CD changer for continuous playback without interruption. Discs for playback This system can play all digital audio disc, finalized digital audio CD-Recordable and finalized digital audio CD-Rewritable format discs. Loading the CD Changer 1Press CD to select CD m

24、ode. 2Press OPENCLOSE. The CD changer tray slides out. 3Load a disc with the printed side up in the right tray. You can load another disc in the left tray. To load the third disc, press the DISC CHANGE button. The CD changer tray will rotate until the empty tray is ready for loading. 4Press OPENCLOS

25、E to close the CD changer tray. A lit on the respective CD numeric flag indicates that its corresponding disc(s) is loaded in the disc tray. Note: To ensure good system performance, wait until the CD changer completely reads the disc(s) before proceeding. Disc Direct Play You can play a disc directl

26、y by pressing the DISC 1, DISC 2 or DISC 3 button. The CD player will stop at the end of playback of the selected disc. The corresponding CD numeric flag starts to flash. DIGITAL SOUND CONTROL STANDBY-ON PROGRAM CLOCKTIMER MASTER VOLUME MINI HIFI SYSTEM CD1 2 3TAPE 1 2 TAPETUNERAUX PRESET TUNING STO

27、PCLEARSEARCHPLAY PAUSEPREVNEXT DISC CHANGE DISC 3 OPENCLOSE VIDEO O P T I M A L J A Z Z R O C K T E C H N O DSC DISC 2DISC 1 DYNAMIC BASS BOOST BAND DC 3CHANGER CD DEMO STOP 2 213 TUNERTAPE 1/2CD SLEEPAUXDIM DSCDBB MUTE REPEATPAUSESHUFFLE CD DIRECT VOLUME 2-6 SPR 00 0009 15 English Compact Disc Play

28、ing a Disc 1Press to start playback. A flashing on the CD numeric flag indicates the selected disc. The track number and elapsed playing time of the current track appear on the display. To interrupt playback, press. The playing time flashes. To resume playback, press again. 2To stop playback, press

29、. Note: All the available discs will play once, then stop. Disc Change You can change the outer two discs while the third inner disc is stopped or is playing. 1Press DISC CHANGE. The CD changer tray slides out. 2Replace the discs in the left and right disc trays. If you wish to change the inner disc

30、 during playback, press DISC CHANGE again. DISC CHANGE will be displayed. The disc will stop playing. The CD changer tray will close to retrieve the inner disc and then open again with the inner disc accessible. 3Press OPENCLOSE to close the CD changer tray. Selecting a desired track Selecting a des

31、ired track when playback is stopped 1Press or until the desired track appears on the display. 2Press to start playback. The selected track number and elapsed playing time appear on the display. Selecting a desired track during playback Press or until the desired track appears on the display. The sel

32、ected track number and elapsed playing time appear on the display. If you press once it will skip to the beginning of the current track and play the track again. Note: Pressing during shuffling can only skip to the beginning of the current track. Searching for a particular passage during playback Pr

33、ess and hold or until the desired passage is located. The volume will be reduced. Play returns to normal when or is released. Programming Tracks Programming tracks of a loaded disc is possible when playback is stopped. The display will indicate the total tracks stored in the programme. Up to 40 trac

34、ks can be stored in the memory in any order. When 40 tracks are stored and you attempt to store another track, the display will show “FULL”. 1Load the desired discs in the disc trays. 2Press PROGRAM to start programming. The PROG flag starts flashing. A flashing on the CD numeric flag indicates the

35、selected disc. 3Press the CD (CD 123) or DISC 1/2/3 button to select the disc. 4Press or to select the desired track. 5Press PROGRAM to store the track. Repeat steps 3 to 5 to store other discs and tracks. 6Press once to end programming. The total number of tracks programmed and total playing time a

36、ppear on the display. Notes: If the total playing time is more than “99:59“ or if one of the programmed tracks has a number greater than 30, then “-:-” appears on the display instead of the total playing time. If the system is reading the discs, programming is not possible, “READING” will be display

37、ed and followed by DISC X. X is the current read disc number. During programming, if no button is pressed within 20 seconds, the system will exit programme mode automatically. “SELECT A DISC” will be displayed when programming an empty disc slot. 16 English Reviewing the programme Reviewing of the p

38、rogramme is possible only when playback is stopped. Press or repeatedly to review the programmed tracks. Press to exit review mode. Playing the programme 1Press to start programme playback. “PLAY PROGRAM” will be displayed. The track number and elapsed playing time of the current track will appear o

39、n the display. If you press REPEAT during programme playback, the current track or all programmed tracks will be played repeatedly. “TRACK” or PROGRAM will be displayed. The REP and PROG flags appear on the display. 2Press to stop programme playback. Notes: If you press any of the DISC DIRECT PLAY b

40、uttons, the system will play the selected disc and the stored programme will be ignored temporarily. The PROG display also will disappear temporarily from the display. It will reappear when playback of the selected disc ends. REPEAT DISC mode will be cancelled when programme playback begins. Erasing

41、 the programme (when playback is stopped) Press . “PROGRAM CLEARED” will be displayed. Note: The programme will be erased when the system is disconnected from the power supply or when the CD changer tray is opened. Shuffle(only on remote control) In shuffle mode, the system plays all the available d

42、iscs and their tracks in random order. Shuffle may be used also when tracks are programmed. To shuffle all the discs and tracks 1Press SHUFFLE. “SHUFFLE” will be displayed. The SHUF flag and the track selected at random appear on the display. The discs and the tracks will be played in random order u

43、ntil you press. If you press REPEAT during shuffling, the current track or all available discs will be played repeatedly. “TRACK” or “ALL DISC” will be displayed. The REP and SHUF flags appear on the display. 2Press SHUFFLE again to resume normal playback. The SHUF flag disappears from the display.

44、Note: REPEAT DISC mode will be cancelled when shuffle is selected. Repeat(only on remote control) You can play the current track, a disc or all available discs repeatedly. 1Press REPEAT on the remote control to select the various repeat modes. “TRACK”, “DISC”, “ALL DISC” or “OFF” will be displayed.

45、The REP flag appears on the display. The selected track, selected disc or all available discs will now be played repeatedly until you press. 2Press REPEAT until the OFF mode is displayed to resume normal playback. The REP flag disappears from the display. Notes: REPEAT DISC mode is not available dur

46、ing programme play or shuffle mode. You can also repeat shuffling a programme. i) “TRACK“ or “PROGRAM will be displayed. ii)The REP, PROG, and SHUF flags appear on the display. Compact Disc 2-7 SPR 00 0010 17 English Tuner Note: For PLUG & PLAY feature, please refer to page 11. Tuning to radio stati

47、ons 1Press TUNER (BAND) to select TUNER mode. “TUNER” will be displayed. A few seconds later, the current radio frequency will be displayed. 2Press TUNER (BAND) again to select the desired waveband : FM, MW or LW. 3Press or for more than one second, then release. The display will show “SEARCH” until

48、 a radio station with sufficient signal strength is found. Repeat this procedure until the desired station is reached. To tune to a weak station, briefly press or repeatedly until the display shows the desired frequency and/or when the best reception has been obtained. Storing Preset Stations You ca

49、n store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display. Automatic programming 1Press TUNER (BAND). 2Press PROGRAM for more than one second. The PROG flag starts flashing and “AUTO” will be displayed. The system will search for every available station in the FM waveband first, MW and then search the LW waveband. All available stations will be stored