Philips-HTS-3090-Service-Manual(1) 电路图 维修手册.pdf
《Philips-HTS-3090-Service-Manual(1) 电路图 维修手册.pdf》由会员分享,可在线阅读,更多相关《Philips-HTS-3090-Service-Manual(1) 电路图 维修手册.pdf(30页珍藏版)》请在收音机爱好者资料库上搜索。
1、CLASS 1 LASER PRODUCT Service ServiceService ServiceService HTS3090/55/77/78 Copyright 2006 Philips Consumer Electronics B.V. Eindhoven, The Netherlands All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, elect
2、ronic, mechanical, photocopying, or otherwise without the prior permission of Philips. Published by HY-ET0619 Service Audio Printed in The Netherlands Subject to modification GB 3139 785 32160 DVD Receiver Version 1.0 TABLE OF CONTENTS Page Location of PC Boards.1-2 Versions Variation 50-60 Hz Power
3、 Consumption: 50 W Dimensions: 360 x 48 x 339 (mm) (w x h x d) Weight: SPEAKERS FRONT speakers System: Impedance: Speaker drivers: Frequency response: 150 Hz 20 kHz Dimensions 100 x 95 x 83 (mm) (w x h x d) Weight: REAR speakers System: Impedance: Speaker drivers: Frequency response: 150 Hz 20 kHz D
4、imensions: 95 x 83 (mm) (w x h x d) Weight: Center speaker System: Impedance: Speaker drivers: Frequency response: Dimensions: (mm) (w x h x d) Weight: PASSIVE SUBWOOFER Impedance: Speaker drivers: Frequency response: Dimensions: (w x h x d) Weight: FM 87.5108 MHz FM 26 dB (1 kHz) FM 23.5 dB 2.96 kg
5、 1-way, closed box system 4 ? 3 full range 0.88 kg/each 1-way, closed box system 4 ? 3 full range 100 x 0.92 kg/each 1-way, closed box system 4 ? 3 full range 150 Hz 20 kHz 239 x 99.6 x 69.4 0.52 kg 8 ? 6.5 high eff i ciency woofer 40 Hz 150 Hz 130 x 328 x 350 (mm) 3.48 kg Semiconductor 12cm / 8cm 1
6、0 Bits PAL / NTSC 4:3 / 16:9 56 dB (minimum) 1.0 Vp-p, 75? 24 Bits / 96 kHz 4 Hz20 kHz (44.1 kHz) RadioFans.CN 收音机爱 好者资料库 2-12-1 1) System Reset a) Press SYSTEM button on R/C. TV show SETUP b) Select the menu using the and button on R/C c) Go feature setup page to do system reset 2) Region Code Chan
7、ge System, Region code, Tuner, etc. setting procedure After replacement / repair of the MPEG board, the customer setting and the region code may lost. Changing the Region code will put the player back in the state which it has left the factory. Region Code 1USA 2EU 3AP 4Australia, NZ, Latam 5RUSSIA,
8、 INDIA 6CHINA TV System 1NTSC 2PAL 3AUTO Menu/ Audio Subtitle (AS) Language 1English 2English 3English 4English AFS 001LX3000D/HTS3400/MRD130 MX2600/HTS3090 002MX3600D/MX3800 003LX3700D/LX3750W 005MRD210 006MX3660D 008FWD573/FWD792/FWD798 010MRD120/MX6050 oem derivative 08 . region code = 1 digit .
9、tv system = 1 digit . as/menu lang = 1 digit . AFS = architechture Feature Set = 3 digits This field is used to define the architecture / features sets for each product. . oem derivative = 2 digit This field is use to define the OEM set. This will affect the background display. Hence in total, repro
10、graming will be done by way of the remote control. It should run as below :- a) Put the player in stop mode. No disc loaded. b) Press the following key on remote control: For HTS3090/55/77/78 (LATAM) : After the Region Code is changed it is necessary to reset the system so that the new Region Code w
11、ill be fully effective. All customer setting will be lost. On top of the maximum number of times allowed for changing the region code is changed to 25. When the counter reach 25, you will not be able to further change the code until you reset the timer by the Region Code timer reset procedure 3) Reg
12、ion code change timer reset Press below key to reset the timer : a) In DISC source, stop mode and no disc in tray. b) Press R/C Play -159-PLAY to reset timer to 25 4) Tuner area change a) Press the OPEN/CLOSE button to open the sets door b) Press 1 5 9 button by using R/C. c) TV Show TUNER AREA d) S
13、elect the tuner area you want by using the and button on R/C, then press OK to confirm. TV show TUNER AREA CHANGED If you didnt press it in five seconds, the system will remain original status. 87.5M 108M 50K/100K Note :- Please refer to the above different tuner area. 5. Video Out Change a) Press S
14、YSTEM on R/C button b) Select the menu using the and button on R/C c) Go picture setup page select Video out item. 6. Password Change a) Press SYSTEM on R/C button b) Select the menu using the and button on R/C c) Go feature setup page select PASSWORD. TV show ENTER CODE.Press 4 times of STOP button
15、 on R/C. d) Select PARENTAL 8 ADULT on TV. e) Enter PASSWORD to 1234. 1234 is a default password supplied. 7. Checking on the Software version a) Open the CD door. b) Press 123 and OK on the remote control. c) TV will show the version on screen. 8. Upgrading new software a) Open the door, then inser
16、t the CD-R program disc. b) Close the door. c) TV will show:- . disc loading . bank30.rom . writing about 6 seconds. . Done CAUTION ! This information is confidencial and may not be distributed. Only a qualified service person should reprogram the Region Code. AREA BAND FREQUENCY (Hz) STEP(Hz) 531K1
17、602K9K 530K1710K 10K FM MW LATAM (55/77/78) 2-2 REPAIR INSTRUCTIONS 2-2 DEF 2-3 REPAIR INSTRUCTIONS 2-3 DE F 3-1 DISASSEMBLY INSTRUCTIONS 1) Open the DVD Tray by using the Open/Close Button while the Set is ON and disconnect the mains supply after removing the Tray Cover. Note: If this is not possib
18、le, the DVD Tray has to be open manually. Take a mini screw driver about 2mm diameter and make a marking 24mm from the tip as shown in figure 2 . Place the set on its side, insert the mini screw driver till the marking and slide it towards the right as shown in figure 1 until the Tray moves out of t
19、he Front Panel. Dismantling of the Front Panel Assembly 2) Return the set to its upright position and remove the Tray Cover as shown in Figure 3 and close the tray manually by pushing it back in. 3) Loosen 8 screws and remove the Top Cover by lifting the rear portion upwards before sliding it out to
20、wards the rear. - 4 screws on the back - 2 screws each on the left & right side 4) Loosen 5 screws & lift up the top edge of Front Panel assembly to free some catches before sliding it out towards the front. - 3 screws on the bottom - 1 screw each on the left & right side 3-1 Figure 3 Figure 2 Figur
21、e 1 24mm mm2 Dismantling of the Main PCB 1) Loosen 5 screw A at the back panel as shown in figure 4. 2) Loosen 4 screw C on the top of main board as shown in figure 5. Figure 5 C PULL A Figure 4 3-2 SERVICE POSITIONS Service position A Service position B Note: In some service positions the component
22、s or copper patterns of one board may risk touching its neighbouring pc boards or metallic parts. To prevent such short-circuit use a piece of hard paper or other insulating material between them. 3-2 Dismantling of the Power Board 1) Loosen 4 screws B to remove the DVD Module as shown in figure 6.
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Philips-HTS-3090-Service-Manual1 电路图 维修手册 Philips HTS 3090 Service Manual 维修 手册
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


