Philips-EXP-521-Service-Manual(1) 电路图 维修手册.pdf

《Philips-EXP-521-Service-Manual(1) 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Philips-EXP-521-Service-Manual(1) 电路图 维修手册.pdf（29页珍藏版）》请在收音机爱好者资料库上搜索。

1、Technical specification .1-1 Features .1-1 Accessories .1-1 Instruction For Use.1-2.1-6 Safety to resume playback. Adjust the volume. Check and clean the connections. Keep this set away from active mobile phones or strong magnetic fi elds. pls insert CD or No audio file indication Insert a disc, lab

2、el upwards. Clean or replace the disc. Wait until the steamed up lens has cleared. Make sure you have inserted an audio disc or an MP3-CD. Music fi le is not played Make sure that the fi le names of the MP3 fi les end with .mp3 Missing directories on MP3-CD Make sure the total number of fi les and a

3、lbums on your MP3-CD does not exceed 350. Only albums with MP3 fi les are shown. The disc skips tracks Clean or replace the disc. Make sure repeat, repeat album, shuffl e or prog are not selected. Music skips or popping sound when playing an MP3 fi le Play the music fi le on your computer. If the pr

4、oblem persists, encode the audio track again and make a new CD-ROM. Music is interrupted and Oops indication Switch ESP on. In-car use: No power, playback does not start Clean the cigarette lighter jack. Switch on the ignition of your car. In-car use: No sound or bad sound quality Insert the adapter

5、 cassette correctly. Change the autoreverse direction of your car cassette player. Let the set adjust to the temperature in the car. INSTRUCTION FOR USE RadioFans.CN 收音机爱 好者资料库 1-3 BATTERIES (supplied or optionally available) You can use the following batteries with this CD-player: alkaline batterie

6、s type AAA (LR03, UM4) or AA (LR6, UM3) preferably Philips). Notes: Old and new or different types of batteries should not be combined. Remove batteries if they are empty or if the player is not going to be used for a long time. Inserting AAA (LR03, UM4) or AY3363 batteries 1 Open the AAA battery do

7、or. 2 Insert AAA batteries as shown onto the back of the door. 3 Replace the battery-loaded AAA door back onto the set. Inserting AA (LR6, UM3) batteries To increase playback time, insert AA batteries into the battery compartment and use the AA marked battery door. Open the battery compartment and i

8、nsert either 2 normal or alkaline batteries. Indication of empty batteries Replace the batteries or connect the power adapter as soon as A blinks and Replace batteries. Remove batteries if they are empty or if the set will not be used for a long time. AAA (LR03, UM4) AA (LR6, UM3) Batteries contain

9、chemical substances,so they should be disposed of properly. POWER ADAPTER (supplied or optionally available) Use only the AY3160 adapter (4.5V/ 400mA direct current, positive pole to the center pin). Any other product may damage the player. 1Make sure the local voltage corresponds to the power adapt

10、ers voltage. 2Connect the power adapter to the 4.5V DC jack of the player and to the wall outlet. Note: Always disconnect the adapter when you are not using it. ENVIRONMENTAL INFORMATION All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable i

11、nto two materials: cardboard (box) and polyethylene (bags, protective foam sheet). Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, dead batteries and old equipment. This s

12、et complies with the radio interference requirements of the European Community. DBB . . . . . . . selects the bass adjustment # VOL + / -. . . . . . adjusts the volume $ LINE OUT/p . . 3.5 mm line out to connect the headphones the remote control this set to the audio input of your stereo equipment %

13、 4.5V DC. . . . . . . to connect the external power supply AAA battery door . . . . . . . . . . . switches the set on, starts playback and interrupts playback 4 PROGRAM/ . . . MUSIC mode: programs tracks and lets you SHOOT/review the program SELECT GAME mode: confi rms selection of a game, setting,

14、etc./ shoot to score 5 MODE. . . . . . . . selects music playback options such as random order and repeat 6 DISPLAY. . . . . . selects the track and album information for MP3-CDs 7 GAME. . . . . . . . selects game mode on/ off 8 3. . . . . . . . . . . . MP3-CD only: selects the next album or fast sk

15、ips tracks forward GAME mode: move up 9 . . . . . . . . . . . MUSIC mode: skips backward and searches backward GAME mode: move left 0 . . . . . . . . . . . MUSIC mode: skips forward and searches forward GAME mode: move right ! 4. . . . . . . . . . . . MP3-CD only: selects the previous album or fast

16、skips tracks backward . . . . . . . . . . . . . GAME mode: move down INSTRUCTION FOR USE 1-4 HEADPHONES Connect the supplied headphones to the LINEOUT/ p jack of the player. Note: LINE OUT/ p can also be used for connecting this set to your HiFi system.To adjust the sound and volume, use the control

17、s on the connected audio equipment and on the CD player. IMPORTANT! Hearing safety:listen at a moderate volume. using headphones at high volume can impair your hearing. Traffi c safety:do not use headphones while driving or cycling as you may cause an accident. IN-CAR USE ACCESSORIES (connections su

18、pplied or optionally available) Only use the AY3545 or AY3548 car voltage converter (4.5V DC, positive pole to the center pin) and the AY3501 car cassette adapter. Any other product may damage the set. 1Put the set on a horizontal, vibration-free and stable surface. Make sure it is in a safe place,

19、where the set is neither a danger nor an obstacle to the driver and the passengers. 2Plug the voltage converter into the cigarette lighter jack (only for 12V car battery, negative grounding), then connect the wired end with 4.5V DC input jack on the set. 3If necessary, clean the cigarette lighter ja

20、ck to obtain a good electrical contact. 4Turn down the volume and connect the cassette adapter plug to LINE OUT/ p on the set. 5Carefully insert the cassette adapter into the car radios cassette compartment. 6Make sure the cord does not hinder your driving. 7Decrease the volume on the set if necessa

21、ry. Start playback on the set and adjust the sound with the car radio controls. Always remove the voltage converter from the cigarette lighter jack when the set is not in use. Note: If your car radio has a LINE IN jack, it is better to use it for the car radio connection instead of the cassette adap

22、ter. Connect the signal lead to this LINE IN jack and to LINE OUT/ p on the set. MP3 MUSIC FILES The music compression technology MP3 (MPEG Audio Layer 3) reduces the digital data of an audio CD signifi cantly while maintaining CD-like sound quality. With MP3 you can record up to 10 hours of CD-like

23、 music on a single CD-ROM. How to get music fi les Either download legal music fi les from the internet to your computer hard disc or create them from your own audio CDs. For this, insert an audio CD into your computers CD-ROM drive and convert the music using an appropriate encoder software. To ach

24、ieve a good sound quality, a bit rate of 128 kbps or higher is recommended for MP3 music fi les. How to organize music fi les In order to easily handle the large number of music fi les on a CD-ROM, you can organize them in folders (“albums”). The tracks of an album will be played in alphabetical ord

25、er. If you want to arrange them in a certain order, let the fi le names start with numbers. For example: 001-ONEWORLD.MP3 002-FIRESTARTER.MP3 003-DEEP.MP3 The albums will be arranged in alphabetical order. If albums are located in an album, they will be played after this album. Albums without MP3 fi

26、 les will be skipped. If there are MP3 fi les which you did not put into an album, you will fi nd them in the album number 01.Various is the fi rst album that will be played. How to make a CD-ROM with MP3 fi les Use your computers CD burner to record (“burn”) the music fi les from your hard disc on

27、a CD-ROM. Use either ISO 9660 disc format or UDF. Some CD burner software like e.g. “DirectCD” support the UDF format. Make sure that the fi le names of the MP3 fi les end with .mp3. Supported formats This set supports: Disc format: ISO 9660, Joliet, Multisession, UDF, Enhanced Music CD, Mixed Mode

28、CD MP3 bit rate: 32320 kbps and variable bit rate Total number of music fi les and albums: around 350 (with a typical fi le name length of 64 characters) Notes: All trademarks used are owned by their respective owners. REMOTE CONTROL AY3778 (supplied or optionally available) Use the AY3778 cord remo

29、te control. The buttons on the remote control have the same functions as the corresponding buttons on the set. 1Press 9 twice to switch off the set. 2Firmly connect the remote control to LINE OUT/ p on the set. 3Adjust the volume on the CD player and remote control. CD PLAYER AND CD HANDLING Do not

30、touch the lens A of the CD player. Do not expose the unit, batteries or CDs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). You can clean the CD player with a soft, slightly dampened, lint-free cloth. Do not use any cleaning agents as they may have a corro

31、sive effect. To clean the CD, wipe it in a straight line from the center toward the edge using a soft, lint-free cloth. A cleaning agent may damage the disc! Never write on a CD or attach a sticker to it. The lens may cloud over when the unit is moved suddenly from cold to warm surroundings. Playing

32、 a CD is not possible then. Leave the CD player in a warm environment until the moisture has evaporated. Active mobile phones in the vicinity of the CD player may cause malfunctions. Avoid dropping the unit as this may cause damage. INSTRUCTION FOR USE 1-5 DISPLAY INFORMATION (for MP3 tracks only) 1

33、Press DISPLAY repeatedly during playback to select the information to be displayed: Filename: the tracks fi le name, Album: the albums folder name, Artist: the artists name (if this ID3 tag information is available), Title: the tracks title (if this ID3 tag information is available), the track type.

34、 2The selected information is scrolled once. The album number and track number are displayed. Note: The ID3 tag is part of an MP3 fi le and contains various track information such as the tracks title or the artists name. Complete the ID3 tag information with your MP3 encoder software before burning

35、the MP3-CD. VOLUME AND SOUND Volume adjustment Adjust the volume by using VOL +/. DBB Bass adjustment 1Press DBB once or more to select the bass enhancement options: moderate bass enhancement is activated. strong bass enhancement is activated. 2Press DBB again to switch off the bass enhancement opti

36、ons. or disappears. PLAYING A DISC With this set you can play all pre-recorded audio CDs all fi nalized audio CDRs and CDRWs MP3-CDs (CD-ROMs with MP3 fi les) 1Push the OPEN2 slider to open the CD lid. 2Insert a disc, printed side up, by pressing gently on the discs center so that it fi ts onto the

37、hub. Close the lid by pressing it down. 3Press 2; to start playback. eXpanium and LOADING are displayed briefl y. Playback starts. The track type (CD or MP3), the current track number and the elapsed playing time are displayed. For an MP3 track, the album number is also displayed and the fi lename i

38、s scrolled one time. Press 2; to interrupt playback. Elapsed playback time fl ashes and the dancing animation freezes. To resume playback press 2; again. 4Press 9 to stop playback. The total number of tracks, the track types (CD, MP3), the number of albums on an MP3-CD and the total playing time (of

39、 an audio disc only) are displayed. 5To remove the disc, hold it by its edge and press the hub gently while lifting the disc. 6Press 9 again to switch off the played. Notes: After pressing 2; it may take some time until the fi rst MP3 track is played. The display clears automatically after 20 second

40、s if no controls are operated in the stop mode. SELECTING AND SEARCHING ON CDS Selecting a track during playback Briefl y press or once or several times to skip to the current, previous or next track. Playback continues with the selected track, and the tracks number is displayed. Searching for a pas

41、sage during playback 1Keep or pressed to fi nd a particular passage in a backward or forward direction. Searching starts while playback continues at low volume. After 2 seconds the search speeds up. 2Release the button when you reach the desired passage. Playback continues from this position. Note:

42、In shuffl e, or repeat modes searching is only possible within the particular track. Selecting on MP3-CDs Selecting an album during playback Briefl y press 4 or 3 once or several times to skip to the fi rst track of the current, previous or subsequent album. The fi rst track of the selected album is

43、 played. Selecting a track during playback 1Keep 4 or 3 pressed to skip quickly to previous or subsequent MP3 tracks. Skipping starts and speeds up after 5 seconds. 2Release the button at the desired track. Playback continues with the selected track. Note: To skip from track to track at low speed, u

44、se or . SELECTING DIFFERENT PLAYING POSSIBILITIES-MODE 1Press MODE during playback as often as required in order to activate one of the following. shuffl e all: All tracks of the disc are played in random order once. shuffl e repeat all: All tracks of the disc are played repeatedly in random order.

45、repeat: The current track is played repeatedly. repeat all: The entire disc is played repeatedly. shuffl e album (with MP3-CDs only): All tracks of the current album are played in random order once. shuffl e repeat album (with MP3-CDs only): All tracks of the current album are played repeatedly in r

46、andom order. repeat album (with MP3-CDs only): All tracks of the current album are played repeatedly. 2Playback starts in the chosen mode after 2 seconds. To return to normal playback, press MODE repeatedly until the display shows no active modes. INSTRUCTION FOR USE 1-6 RESUME AND HOLD Storing the

47、last position played RESUME You can store the last position played. When restarting, playback will continue from where you have stopped. 1Switch the slider to RESUME during playback to activate RESUME. resume is shown. 2Press 9 whenever you want to stop playback. 3Press 2; whenever you want to resum

48、e playback. resume shown and playback continues from where you have stopped. To deactivate RESUME, switch the slider to OFF. resume goes off. HOLD locking all buttons You can lock all buttons of the set. When you press any key, no action will be executed then. 1Switch the slider to HOLD to activate HOLD. resume is shown and Hold is displayed. All buttons are locked. When pressing any key, Hold is displayed. 2To deactivate HOLD, switch the slider to OFF. resume resume disappears. PROGRAMMING TRACK NUMBERS You can store up to 50 tracks to play in a program. A single track may be stored more th